BoschT101BR 5-Piece 4 In. 10 TPI Reverse Pitch Clean for Wood T-Shank Jig Saw Blades

Just what you need when cutting vinyl plank flooring for odd install around odd shapes

What can you say, Bosch still makes quality. Used these to cut a 1950's laminate countertop. Perfect, no chatter, or tear out. Impressed.

great for battery operated too

The width of the blade was a little wide and could not be inserted into the saber saw I have. But with a couple of passes with my surface grinder the blade was able to be utilized. So far I have only used one blade. These blades have a tendency to want to jump upwards until they get some use. Works fine now. Good product.

I used these with a Bosch jig saw to cut laminate counters after they were installed. They were the post form type, and it made the whole job much easier cutting out sink holes from the top (no chips at all). Avoids flipping over a counter after cutting a large sink hole in the middle. Also it's easier to mark out on the top side. I used 3/4 plywood under the laminate counter, so the overall thickness where the holes were cut was 1 -1/2 inches.The blades may work in a standard jig saw but I did not try them. I ordered the countertops from hd, ready-made from the fabricator, straight runs of counter only, and recommend this approach -if you only do counter tops every 20 years or so..

Bosch is an excellent company. Good blades for cutting fine wood projects without splintering.

While I am not a fan of Bosch tools, their jig saw and blades are the best. I am a full time woodworker, and just can not get enough out of them. They have so many different kinds to work with your particular situation

Worked great! Used these to cut laminate counter tops and did not have a single chip!

Work ok