sb components SPI-Box Raspberry Pi 2 White Case with swith mounting Points for PIR and Raspberry Pi Camera Module
C**O
Fits Raspberry Pi well! Hard to get apart!
This box is for the Raspberry Pi, it fits great, but is hard to get apart. Because it is hard to get apart, I deleted one star.
M**A
Nice light case though
If your Pi has a heat sink the location of the pins for the motion sensor when connected put it right on top of it. Case will not close without "bending" pins. Nice light case though.
T**T
Decent case, but may not have everything it's supposed to
Case is great for Raspberry Pi camera applications. It didn't come with the dome so I glued some cardstock over the opening to hide it.I bought three of these cases, however only one came with the screws to screw down the camera module.
A**R
You just get the plastic box. No screws to ...
You just get the plastic box. No screws to attach the PIR module and the camera, and no rubber/silicone feet.The screws/feet are very small and very difficult to get elsewhere.
A**R
Three Stars
Case is great although, Mine did not come with the dome.. even though the box says with dome.
S**N
Auto Camera
Nice project case if you want to have an auto-trigger camera made out of a Raspberry Pi. Still needs sensor, RPi, and RPi camera module
S**G
Two Stars
It is not compatible with the Pi 2It is for the Pi 3
A**A
SPI-BOX Raspberry Pi 2 White Case- GREAT
SPI-BOX Raspberry Pi 2 White Case with swith mounting points for PIR and Raspberry Pi camera moduleSold by: SB Components LtdI was a little bit worried that my Raspbery Pi 3 would not fit in this case. However, when I put it in, it was a perfect fit. At first, it is a bit tight to put in and I think it would be a problem to try and get it back out as its 'clipped in place'.No components were included. The contents included was the white case and 4 very small screws to mount the PiCamera and the PIR sensor module. Closing the top and bottom base together is easy. Taking it off is little bit harder but it's possible. Compact and simple design. Stands on any side- except if you're using outputs such as the power cable- then it wouldn't stand on that side.The only minor problem with it is that the hole created on the case for the PiCamera is not 100% aligned. However, this does not affect or block the PiCamera sensor.Great product and great seller. Packaged well and delivered well on time.100% recommended.Please go through the attached images I have taken.Any questions regarding about this item, please leave a comment and I'll try to get back to you ASAP.I would really appreciate it if you marked this review as helpful or not so that I can improve my future reviews.
A**D
OK...ish...maybe not
Initially quite impressed. Relatively cheap, comes with mounting screws, all ports are accessible and the board clips nicely in place inside too.Problem is for its intended application I've ran in to a problem. The cutout for the PIR sensor is located directly above the CPU/GPU meaning that the heat generated by running the Raspberry Pi is constantly triggering the PIR sensor.I'm going to try some sort of heat shielding, maybe a heatsink and another PIR module in case this one is particularly sensitive, but for the moment; if I clip the case together it just read constant triggers..... When I pull the two halves apart it's working fine.
W**M
Sturdy Raspberry Pi Case with space for a RPi Camera and PIR
A nice Raspberry Pi Case, which offers room for the Raspberry Pi Camera and a PIR. It's a solid case which fits together well and even has space for mounting screws on the bottom. My only negative was that tiny screws are required to secure the Camera and PIR in place and these screws were not supplied. If these screws were included, along with screws for the wall mount then it would be a perfect package.
P**N
Needs screws
Didn't seem to get any screws with this to mount the PIR sensor so pretty useless for me.
N**E
Five Stars
Great case, exactly what I was looking for
Trustpilot
2 months ago
1 month ago