qt Minwax 60900 Clear Wipe-On Poly Oil-Based Polyurethane Finish, Warm Gloss

I applied this using a brush specifically design for polyurethane use and the results were fantastic. Application was easy and forgiving. It didn't leave any brush marks and I was able to work with it several minutes after application. My experience with other wipe-on polyurethanes is once it's applied, you have literally a minute or so to work with it before it starts setting up. This applies more like paint and gives you some time to correct any problems. I HIGHLY recommend Minwax 60900000 Wipe-On Poly.

This is the best. Low fumes, dries fast, and easy application.

First off-I hate any poly, stain or sealer that needs to be brushed on. I despise the dreaded brush marks. So when I seen this was a wipe-on poly I had to try it. First I stained my table with a cherry wood stain-I gave the table 3 coats to get it a nice dark cherry color. Then, I applied a coat of this wipe-on poly. One coat dried nicely and looked good, but I wanted more durable protection for my table. So, I let it dry, then did a second coat, let that dry and did a third coat. Now-3 coats later the table looks AMAZING! No streaks, no sticky residue, dries quickly, and looks so glossy and shiny. I did not noticed any 'yellowing' as some of the other reviews have mentioned. However-I stained my table a cherry red color. If it was white-maybe there would be a yellow tint? But, I can say that the whipe on poly did not change the color of my table, the only thing it did change was make the table look glossy, almost like glass. Which really made the cherry stain pop. Very happy and would recommend this wipe-on poly to my friends, family and any one else hates brush on poly and brush marks.

Nice and convenient but not as good as the regular poly. This poly has to be rubbed into the wood and needs several coats but it can be very convenient for very small projects.

Easy to use and allows me to control level of gloss.

This stuff is awesome. I used it as a top coat for a dining table i repainted. I used probably a million coats of it, but it was worth the time. i got a foam brush and cut an old tshirt up and was wrapping the brush in pieces of the tshirt so i got a super smooth finish with no air bubbles (which the foam brushes alone gave me). The air bubbles (as long as you apply it thinly) just resolved themselves while drying. This project took me awhile since it was such a large area to cover, but the end results were totally worth it. My table looks great, very smooth, shiny and i can tell it will hold up without issues. I tried multiple other poly products before i got it just right with this one.

This was used on hardwood bowls. Was easy to apply and I was very happy with the results.

I was noticing my light maple cabinets near the kitchen sink and dishwasher were looking pretty "weathered" in spots from unnoticed water splashes from loading the dishwasher. I did a YouTube search on how to restore cabinets and found this product. I could not find it in stores locally, but I found it here on Amazon and ordered it. I am very pleased with the result of using the wipe-on poly. I just took a soft cloth and rubbed the product on the affected areas (two coats and I did not sand in between coats as directed). I DID NOT have to apply it to the whole cabinet, it just blended in with the original finish. Then I noticed some of the original finish on the upper cabinets had worn off from me wiping them clean near the lower corner areas where the hand is placed to open the cupboard (mine don't have knobs or handles). So I wiped some on in those areas also, and again, it renewed the cabinet and just blended in with the original finish so I only had to do the corners. Keep in mind, this product did not make the "weathered" areas look brand new again, but it looks 99.9% better than it did! My next project is to freshen the foot bars on my wooden bar stools!

I find this a great product for finishing guitar bodies without having a spraying facility, It can be difficult to get hold of in the UK and consequently quite expensive. takes a bit of practice when learning to use it. I have discovered less is more.

Worked really well as the finish of my guitar!!

Does what it says on the box

Not happy with this product to be honest. It's supposed to be gloss but it's more like "matt".

good product works according to instructions