KATUR 1156 BA15S P21W 7506 LED Bulbs Super Bright 12pcs 3030 & 8pcs 3020 Chips Canbus Error Free Replace for Turn Signal Reverse Brake Tail Stop Parking RV Lights,Amber Yellow(Pack of 2)

Bought this for the 3rd brake light on my 2017 Hyundai Elantra Limited. Worked good and didn't throw any error codes for about 2 months and then one stopped working. Since it came as a 2 pack, I swapped to the other bulb and it worked fine for about 3 months until it stopped working as well and threw another error code. Looking at the burned out bulbs, there seems to be brown marks all over the circuit boards inside so I'm assuming they fried themselves from heat maybe. Glad they didn't cause any damage to my car. Good looking bulbs but don't last long at all. Also, the 2 year warranty seems to be fake... I can't find anyone to contact! But it's alright, I don't want 2 replacement bulbs that will most likely burn out as well. I guess I'll just stick to the original incandescent bulb my car came with and I recommend you do the same or look elsewhere.

I wish these bulbs last, built is very good, brightness is great (much brighter then original bulbs) and not over bright that could blind following cars, the major problem is they don’t last on my Audi, within a week or two I started to have broken ones ( my A3 has 4 bulbs per tail light) since that I have to change bulbs constantly. After 3 month of all this non sens I removed them all and put back incandescent bulbs and no more problems. The seller was really trying to make it work and was always sending me new bulbs promptly but it just doesn’t work. They might work fine on other cars but my experience on Audi A3 is a failure.

Audi 07 Q7 Hyper Flashing and NOT error freeThese are hyper flashing crazy. I had to remove them asap before I caused seizures to oncoming humans.These are 100% not canbus error free. They were instantly flagged as blown bulbs.Who actually sells 1157's that are CANBUS ready error free? I can't find any.last 2 attempts fails and flashing, but these take the Gold Medal for hyper flashing. I'm surprised I was able to get them out before having a seizure myself.

I have a 2002 VW Golf that I've been wanting to convert the tail bulbs to LED's for various reasons. There are not many quality options out there yet for bulbs with the built in canbus resistors as that makes the bulb more complicated for manufacturing as well as designing for heat dissipation.I won't go into why hyperflashing happens, but turn signal lights are prone to it and brake light bulbs will throw errors due to the on-off nature of the bulb and the way the car monitors these. In my car, only those 2 are monitored, nothing else (ie I previously converted my running lights and backup light to LEDs without internal canbus).These have worked very well so far. Time will tell if they last. But no errors with these in the main brake bulb socket location. Very bright too. My tail light housings are red, and the red nature of the LEDs really gives it a nice deep red color. I had white ones behind the lenses prior, but white LED's tend to make a red lens show "pink" and orange lenses turn to a kind of "cream". They basically wash out the color of the lens because white LED's are so bright. They work, just not the greatest color. But since I have swapped to red everywhere there is red in the lens, it looks really good.Edit 10/17/2020: I wanted to circle back around and clarify a couple of things. My original review is above. Eventually these threw a code on the dash for the lamps being out. In these older (02) VW models, the car monitors if BOTH brake lights are detected to not be functioning, not one or the other. I wanted to put them in the blinker spot just for testing. They worked fine in the blinker, so these bulbs DO defeat the hyperflash syndrome, but they do not address tricking the car into thinking that halogens are in the spot, so I had to return them. They functioned perfectly though except for that, and I couldn't live with that flashing "brake out" light on my dash...the search continues.

used as brake lights. burned out within a month. returned them. replacement bulb burned out again. sockets are clean, grounds are clean and have less than ohm of resistance. these are extremely BRIGHT bulbs and I would recommend trying them as running lights, and perhaps as back-up lights. however. i cannot recommend them as brake lights. They also generated bulb failure CANBUS warning on dash - even when they were working.

Used to replaced the OEM incandescent tail light bulbs in a Mercedes Metris. Worked fine initially but one bulb burned out after 4-5 weeks. Also had another identical pair in another car. One bulb burned out after 3 weeks. Did not want to try another pair from the same manufacturer. Replaced them with a different brand.

Some of the other bulbs advertised do a "Bait and Switch". Their Amber bulbs are error-free. When you search for an error-free bulb, Amazon presents their amber bulb. If you switch to a white bulb, the error-free notation goes away, but you may not notice. You gotta watch some other bulbs. These white bulbs that I received are error-free. :D

Despite the negative reviews i bought these 2/2021.. they were exactly what my car was missing for a "premium" trim.. since my car came with Factory Department Of Transportation "Standard".. bulb is on left..You can't even see that its on.. until you zoom into this picture..12/14/21.. Updated rating from 5 to negative 3... One went out 6/15...I chose a different brand to replace them instead of wasting time with the "warrenty"...in anticipation the 2nd would last a bit longer.. I left the 2nd bulb in.. as expected the 2nd went out on Thanks Giving Day right as i was going out of town..

Bright, and pretty easy to fit. Unlike other brands, they really do work and no errors on my car.You just need to check the pins as there are 2 types of fitting into socket, one has pins opposite at 180 degrees, the other is 150 degrees, which I needed

Easy to fit and yes well made though why they didn't put an LED projector at top of the unit .Very dissapointed to fit and find the error code coming up and flash speed double normal rate . Not possible to fit a resistor on VW

Bought these for my wife's Fiat 500X. Previous bulbs claiming to be 'error free' were useless so I decided to give these a try. They've been in the car for a few days now, no flickering and no error messages. They're fantastically bright and I'm really happy with them so far!!

Bulbs have an error in them work at start up for approx 5mins then shutdown need all lights and turn on again - unfortunately in ford ranger 2013 linker to rear running lights so those die out too due to error in running light module I assume?... be weary and check before you drive. possibly just my type of vehicle

No one will miss you indicating ever again with these easy to fit as a normal bulb and no hyper flashing fitted to a 03 discovery with no issuesThey are BRIGHTThat good I bought a set for my wife's car