Black Plague PDR Glue Sticks - Paintless Dent Repair - Grey, 10 Pack

Worked very well..

This glue works so much better than the glue that is included in the cheap kits you can buy on Amazon.

Works

I'm a noob PDR guy with plenty of free time and a DIY attitude. I purchased a multi piece PDR kit that looked like a decent place to start. After a dozen or so pulls with that setup, the weak links in the kit were easily identifiable. The glue gun and glue sticks were messy and hard to remove with limited tab adhesion.I got a new glue gun and these glue sticks. With the very first pull, I knew I made the correct decisions. I was working on a 75 degree day in direct sunlight and this worked great at removing what once was a golf ball size dent. This took multiple pulls, but I had it fixed in half an hour.I found this product is easy to remove with one spritz of alcohol on the vehicle and tabs. In fact, 95% of it peels off in one piece most of the time and has excellent adhesion.Tabweld KECO Gray PDR Glue definitely worked for me and I would purchase it again.

Well it's better than original ones but still didn't get complete dent out work great for small dents not good for creases

These glue sticks are awesome. They pull hard and remove easily. I live in houston texas so that shoukd tell you about tge twmpe5rature

This glue is absolutely worthless….crumbly if you don’t remove it quick enough, pulling power is weak. I normally get The Man of Steel (by far the best I have ever used) I needed glue quick and this was prime next day so made the purchase.. it worked on a few dents… was just very very very inconsistent… blew threw half the pack in just a few short days. Sorry to beat your product down so hard but when out in the field techs need a product they can rely on and this one is just not it. Get back to the drawing board fellas….Clean up 2 out of 5Pull power 2 out of 5Reliable 2 out of 5

I was struggling to get any dent pulling strength from my generic hot glue sticks. Saw these were used by professionals and ordered a set.These were longer than I expected, at 10 inches in length, which was good as they aren't cheap. The hot glue works best with a high temp glue gun (these are 7/16" dia. sticks) and a cooling time of 10 minutes in 80 deg F ambients. Typically the dent pull tabs release first, sometimes with a snap and sometimes simply pulling and stretching the glue until they released. In one case, I had to use alcohol after pulling as the pull tab wouldn't release at all with the tool. Removal from the vehicle's paint is easy... simply spray some 91% Isopropyl alcohol on the glue and peel, with maybe another spritz if required. It releases easier than other glue sticks I've used.Good stuff! I'll be buying again!