Ultra Durable 99002588 Dishwasher Door Seal Replacement Part by BlueStars – Easy to Install – Exact Fit For Frigidaire & Kenmore Dishwashers - Replaces WP99002588 AP6014445 PS11747684

Fits an old Maytag Silentseries 200 like a glove. MDBH945AWS. Fixed a lower left door leak during the rinse cycle after the old one started falling apart. It is an exact match for the OEM seal in design, and thickness. Easy to slice the excess 6 inches with kitchen shears. Good purchase.

Great value. Easy install.

I used this on an always-lousy end-of-life Maytag dishwasher.I made the mistake of cutting it exactly to the size of the channel and discarding the rest (this was actually two mistakes...).This seal did't fit the channel snugly and would keep falling out so I initially used some gorilla glue, which didn't tolerate the heat, and then some silicone to secure it to the channel. The seal still leaked from the bottom. BTW, the gorilla glue hardened up and was a pain to remove from the seal, so lesson learned...I pulled the seal out, removed the silicone, cut it into two halves and installed each half leaving an extra 1.5" or so extending beyond the end of the channel at the bottom on each side. This time, instead of using silicone, I wedged some popcicle sticks between the side of the channel and the seal to keep it in place. Since I had previously discarded the unused portion of the seal, I had to fill the new gap between the two halves on top with some self-adhesive rubber sealing strip from HD.In hindsight, I would have been better off had I just used the general-pupose seal from HD instead of ordering this so-called "replacement part". For one thing, I doubt I would have blithely discarded the unused portion.Why Maytag molded in a well-defined channel which still leaks when a seal which snugly fits the channel is installed is a mystery.

No more leaking dishwasher! The floor is dry and I am very pleased with my purchase.

DID NOT FIT IT WAS TO SKINNY TO FIT IN GROVE

This fitted well for a Maytag dishwasher. To make sure it was direct replacement, I checked parts sites on the internet to match the numbers. I had installed this dishwasher in 2006, and the only issue was slight leak on the door edges. Putting a new gasket in solved all issues, including a better drying cycle and eliminating residual water at the bottom of the washer following a wash cycle - now, works like when it was new. You may want to put a little plumbers silicone grease at the bottom of the gasket to ease the door against the gasket. I would recommend changing this gasket out at about 10-12 years of use, before leaks happen. Made in China, because USA Inc. forgot what it's like to make things. Good value.

Fit nicely in the chanel, just had to trim to length, which was expected.

Did not receive the seal pictured. I recieved a different seal that doesn’t fit!