iUniker [2020 Latest] Jetson Nano Case, Jetson Nano B01 Case with PWM Large Cooling Fan Jetson Nano Case Cooling Fan Compatible with Both B01 and A02 Version with Pwm Fan (for B01 & A02)

Attached picture is about the instruction to assemble the B01 version of Jetson NanoThis step miss one important thing Remember to put a jumper to disable the auto power on feature as indicated by the yellow circleIt would be better put a label to indicate the power jumper and power light jumperI found out that the screws to fix the cooling fan on top of the CPU are not long enoughOverall this is a great case for Jetson Nano

I have bought two of these case/fans from two different vendors for the Jetson nano and still do not have the correct parts/information to complete an installation. This product does not seem to have the correct fan wiring to make the correct installation without instructions but the include hardware was correct for the Jetson nano heatsink. The pictures do supply sufficient information to show orientation of the fan but not for the wiring. I could find no instructions with the product or on the vendor's web site.I feel this product is not up to the standards I expected from this vendor.

I like to think of myself as a smart, educated man, however the build of this case had me second guessing myself. If ever there was a product in deep need of instructions for putting together, it's this. I thought the attachment of the fan was going to be the most problematic part; I was wrong. Getting the case pieces oriented in the correct way is a struggle. The long posts need to be added _first_, otherwise you'll never get the Nano placed the correct direction. Took me three attempts to get it sorted out.Yes, it looks pretty, but it's a pain in the rear end to assemble!

WARNING! Pin labels are Wrong! After spending hours coding and attaching pins and troubleshooting, I had to completely disassemble my project to find out the PIN numbers printed on the case do not match the BO1 board! Extremely frustrating

Another great product from Iuniker. Nice case - very easy to install fan and put case together. just one note - the case is asymmetric so pay attention to how the Jetson board fits before putting it all together... and to where the wire from the fan should go.

I must start by saying that I did order this without knowing that there were the two versions of the board. I ended up with two items In the kit were by one would have to be left out due to both requiring the same connection point to work. I did a work around to resolve this. Otherwise it's a sturdy well built case, but maybe a bit more info on the many variations of this could be mentioned in one place and which board they are designed for.

Simple, functional case. Easy to assemble. Highly recommended.

The hole in the top panel was not large enough to fit the heat sink on the Nano, therefore had to return and purchase a different case from a different supplier.