Goodman Furnace Draft Inducer Blower # 0131M00002P

Bearings was going out in my inducer motor from my 5 year old Goodman furnace! Started last year only to keep getting louder and louder. So after examining the motor and housing, it looked relatively easy to change. I wrote down the model number and the actual part number that was on a sticker attached to the housing which made it easy to find on Amazon. Ordered from North American HVAC and had it in 2 days. Installation was a breeze, there were 7 total sheet metal screws that were removed and a vacuum tube and then the black and white power leads. The assembly came with a new fiberglass gasket and the change was made within 20-30 minutes. Make sure you turn off the power and gas to the furnace before taking the access cover off. It's a relatively easy job just take your time and then save yourself hundreds of dollars you would pay a HVAC service to complete! The new inducer is so quiet compared to the old one, it is possible that maybe the old motor Bearings could have been oiled but certainly don't take that chance. For the $105 spent was well worth it and changing it yourself gives you a sense of knowledge that yes you can do it! Overall the assembly was the exact same and it runs smoothly.

Had an HVAC tech out earlier this week to fix a problem with the ignitor, which he did for a good price. He then proceeded to tell me I will need a new exhaust fan/motor to the tune of "about $600 installed." Oddly enough, this part started making noise while he was still here, no noise before. I told him I had a good friend in the HVAC business for 20 years but didn't want to bother him, that's when he told me I could get the part MUCH cheaper on my own...interesting enough. I'm pretty handy so after some searching I came across this unit. After reading the reviews I ordered the part and was confident it was the correct part. What I received was an EXACT REPLICA of the old unit: part 0131M00002P, for a Goodman unit #GMS80603AN, serial #1210581638. I know some people may have received a similar, upgraded part, but what I received seems to be the exact same one. I installed it in about 30 minutes and it works perfectly, very quiet and no noise like the old one. Do this yourself and save hundreds of dollars...7 screws and two wires: black to black and white to white. As some others mentioned, I do not believe the fan will run counter-clockwise even if wired wrong, but you should have no issues with a self install and the fan should run clockwise, but definitely check this once installed. Thanks to all the reviews with helpful info, and our course Amazon!!!

Yes, it looks different from the original... turns out that's a very good thing! This part has a newer design for the blower motor that's more efficient and much quieter. This was a perfect drop-in fit, and came complete with the fiberglass gasket for easy installation - just six screws in my case.Tenant called about 'no heat' on Friday night... site visit on Saturday diagnosed a flaky electrical connection with the inducer-blower motor... removed unit, discovered it had aluminum wire for the coil so not repairable... ordered this replacement Saturday afternoon, received it on Sunday just before noon! Installed an hour later and furnace is happily making heat -- but without the nasty noise it used to make! Thanks vendor. Thanks A'Zon.

It was definitely the right part and seems to be good quality. Looks different from the original but it bolts and plugs right in. Performs well so far!

Bought this as a repair for my 2006 Goodman GMSB0703ANA and it went in well and worked right out of the box. Found out through my research it is a direct replacement/upgrade for my old exhaust unit. Much quieter around 50%.

I couldn’t be happier with this purchase. Very reasonable price, fast shipping, and even without install instructions it went in perfectly without issue. We had heat again within a half hour. So grateful and highly recommend this part to anyone who might need it.

Apparently, my old one has been on the fritz for like a year before it finally kicked the bucket. The new one is so much quieter - we actually had to check to make sure that the furnace was actually working after we installed it.For my furnace, the installation was very quick and easy - like 7 screws. Wear gloves when installing it, I didn't, and I got fiberglass from the gasket in my hands, which is unpleasant. Honestly, a mask probably wouldn't be a bad idea, either.The old unit had tabs that the wires went onto. The new unit had wires to connect. I was kind of concerned about this - don't be, they connected just fine.

Works great! Much cheaper than calling a company!

Look longer to find my tools than it did to swap out! perfect fit

This blower motor and gasket kit comes complete ready to bolt on.Great quality component, fitment is perfect,and the packaging is above par.Highly recommend this dealer for FURNACE PARTS.

My old motor seized, and after installing this one it was whisper quiet, and worked better than the origional, this was an upgrade. it also arrived faster than expected which was a huge plus during this cold winter.

The part worked well and our furnace is l running smoothly and working as it should.

Perfect replacement for the original, new design.