XT-XINTE NGFF M2 to PCI-e 4X 1X Slot Riser Card M Key M.2 2260 2280 SSD Port to PCIE Adapter Converter Multiplier for BTC Miner Mining (1 Pcs)

works. new gpu added.unfortunately there are better products out there such as the 4-1 splitter. These will take up a lane and depending on the mobo, you wont be able to load more than the mobo lane can handle even if you have pcie/m.2 lanes open.For example, on my asus mobo, it has 6 pcie lanes with two m.2. unfortunately i cant run 8 gpus even with this (i can run upto 7). However, with a 4-1 splitter I can run more than 8 GPU.

The media could not be loaded.  Used this to get a 7th GPU on my rig. It's been going for about 3 weeks now with no issues. Since I'm using a riser (which is externally powered), I didn't need to use the included power cable with this board. Ignore the power cable in the video, I didn't realize I didn't need it plugged in until later.

Review for XT-XINTE NGFF M2 to PCI-e 4X 1X Slot Riser Card M Key M.2 2260 2280 SSD Port to PCIE Adapter.I plugged it. Booted up PC and it just worked. No messing with BIOS or drivers or anything. Has been running solid for a week now.

Works absolutely perfect! I bought 2 of them for a crypto mining rig to connect more GPU's. Can be a little tricky to get working if you aren't knowledgeable about M.2 slots, but that's computer knowledge, not lack of a good product.

Complex on the mother board and works great without any glitches for several months 24/7 without a break.

This works, but unfortunately the orientation is not useful for my needs. When cards are inserted the backplate gets in the way of fully inserting it flush. Wish the connector was rotated 180 degrees.

Works great. Added a riser off it, to a 1660 Super. Don't use any power cable to the adapter... Just power riser as normal, flawless.

Working well as a 8th GPU in my MSI Z170 mobo

Work great in m.2 slotFor any card plugged into this adapter, you may need to remove the metal bracket on the card though, as it depends where in m.2 slot is situated/direction on the motherboardAlso some of the m.2 slots are slightly higher, so a standoff may be needed to scre down the card as it will be more height then the pcie slot bracket holder on the back of the case.I uses these with mining risers and pcie-usb3 adapters 1x. which work goodThis adapter is good for an internal usb 3.0 card or raid controller or network card (something small), so in the event the card cant be screwed down the card is small enogugh it stays in place. 4x cards have a better fit and 1x card may lean forward if not screwed down.

Perfetto, funzionante e subito riconosciuto, funziona anche senza alimentazione supplementare (cavo sata in dotazione)

Nutze die Teile, um an den beiden m.2 Slots Grafikkarten zu betreiben.Auf dem Board mit 6 Anschlüssen laufen dementsprechend jetzt 8 Karten. Ohne Probleme.Alles super!

It works great. The power line included is not needed for gpu installation with risers.

Worked like a charm. As others have stated you don't need to use the power cord. I just plugged it in and used a riser to power an extra GPU for mining. No issues at all!