KAISH Black Guitar Roller Saddle Bridge Tune-O-Matic Bridge for Epi Les Paul,SG,Dot,Bigsby Guitar with M8 Threaded Posts

I put one of these roller bridges on a IYV 300 that I use for church because I was breaking strings . I've been playing guitar and doing repair work for over 40 years. I was certain that the bridge was the problem. I looked at a lot of replacement bridges and settled on this on this chrome beauty . The quality is very good but make sure to spray the fine threads of the roller adjustment screws.I believe any lube that is applied at the factory dries before shipping. The bridge hiegth adjustment posts that come with the roller bridge are a direct replacement for the IYV and my Epiphone 339 without using the bases that come with the height adjustment post. I use DADARRIO chrome 10s for the great sound and string life .They are not cheap strings but with this roller bridge, once stretched, stay in tune for days of playing and recording.I feel that every "tuneamatic" style bridge should be changed to this Korean made, Kaish quality bridge. I own 17 electric guitars ,several will be getting retrofitted with this rock n ROLLER bridge. PS.... very easy to change out and intonation is very precise due to the fine threaded adjustment screws. You don't have to have a Whammy bar setup to benifit from this bridge. Save frustration when tuning ,lube your nut and let the rollers do what they do when tuning. Jamm'n Jerry .Bear, DE. USA

Great buy! Works perfectly and mounted perfectly on the original studs. Intonation was a breeze.

Decent piece for the price. If you're hesitant, go ahead with the purchase. Before you install however... pick up a "Good" #1 std. Screwdriver & Quality lubricant. Dry film (graphite) lubes are okay. I prefer liquid penetrants with white lithium personally. Generously lubricate the rollers and the intonation screws and run the saddles the full length of adjustment several times each to save yourself from binding later on. I put a strip of tape over the blade of the screwdriver to prevent falling or scratching the slots or finish of the screws. Be certain that no lubricant is left behind , use a cotton swab to reach difficult areas, so your guitars finish isn't adversely affected in any way. Installation went very smoothly on my Epiphone ES335 Pro and the bridge has performed flawlessly in the few months I've been playing with it. It is a fairly heavy unit cast from some zinc alloy but it isn't lightweight pot metal crap. It helped with setting intonation & keeping it locked in. It also has added quite a bit of sustain in combination with the tailpiece I installed. The bridge is tight on the posts in a good way, no slop or rattles and adjusts height wise easily also. Together they totally out-perform the stock bridge & tailpiece in every way. The finish is very nice as well. I dont see getting a better setup guess you want to spend a hundred bucks or more for a machined billet piece. I'm not all that convinced the difference would be any more than negligible but some audiophiles or highly technical full time professional musician may? notice a difference and invest for recording. I can think of better things to spend my cash on personally, like the graph tec ratio locking tuners I installed at the same time. Fantastic machine heads! I left a review there also. The important thing, imo is how it sounds to your own ear & whether you enjoy the sound, or not. For the price this isnt a huge gamble. Keep making your music friends it frees spirits and rescues souls.✌P.S. the one star I knocked off because of the pre work I had to do. Alleycat

Replaced the bridge and tail piece on an Epiphone SG I could no longer keep intonated. This worked perfectly, was easy to install, the fine tuners work extremely well and I haven’t had an issue since. Would definitely recommend!

This was a drop in replacement for a vintage SG and it worked well, I liked that the screws were a perfect fit so I installed in 5 minutes. I did have a couple of stiff screw on the Kaish but just added a drop of 3-1 oil and worked back and forth to make sure all the screw adjusters were easy to adjust so no problem with the adjustments and it all seems to work great the quality is higher than I expected. I had to replace a harmonica type bridge, I was having tuning problems with the original I think it was because it was getting crusty and had metal corrosion even though I kept it clean and would use graphite to lubricate the string contacts it would go out of tune after a few songs of playing, now I have had it a couple of months I think there is a big improvement! it stays in tune and I even feel a slight improvement in the sound but that might be the intonation being more stable. I was going to replace the bridge with a Kluson Harmonica Tune-O-Matic Bridge but did not want to spend $130 right now, I am very satisfied with the KAISH at this time, I also bought a metallor tune-o-matic style guitar stop bar tailpiece both were a good choice to keep my SG in looking and sounding good. I will keep the originals and may see if they can be restored in the future. Good luck and good tunes!

Bought this because I couldn't keep my Chibson SG in tune to save my life even with Locking Tuners. This bridge worked like a charm! Bonus is it has fine tuners but I haven't had to use them yet. I would suggest this Bridge if you are having tuning issues.

I got this for a vintage style build and wanted to give the trem as much of a chance as possible, rollers seem fine and roll freely, adjustment was long enough that i didn't have to freak out about mounting perfectly while still not looking massive, quality seems good so far with pretty smooth threads

Great upgrade

Der Versand aus China dauerte logischerweise ein Weilchen, aber die Qualität ist super. Keinerlei Grate oder Fehler in der Oberfläche, alle Rollen laufen leicht, alle Gewinde laufen leicht, nichts hat spiel. Präzise Verarbeitung, der Saitenabstand und Radius passt. Die Saitenhalter-Krallen sind ebenfalls aus Metall. Was genau das Material ist, kann ich nicht sagen, aber ich kann keine klanglichen Nachteile feststellen.Ich denke, diese Bridge/Tailpiece Kombination steht Teilen gängiger Import Gitarren wie Epiphone, Ibanez, Cort, Yamaha usw. in nichts nach und kommt ggf. aus derselben Fabrik.

Ma gretsch tient beaucoup mieux l'accordage

Yes… the title says it all…… ive had gibson and now this…… cant feel, see or hear the difference!

This is a great replacement bridge for the Epiphone Les Paul. It fit my 1998 Korean made Les Paul perfectly with no modifications. I feel it is a good quality pice. Saddles and rollers are tight and installation and set up were quick and easy. It looks great too.