1.Door lock (press button“lock” once) 2.Door unlock (press button “unlock” once) 3.Car search 4.Raise window output Press button “lock” once, the lights flash once. the door will be locked, the window closer will output 30 seconds. 5.Remote trunk release (+ - optional equipment) 6.Electric and pneumatic door locks (Factory default setting is electric door lock) 7.Program transmitter Package Include: 1 x Control box 2 x Remote Controller 1 x Set of Wire
E**S
Good Quality and Works Great
I installed this kit to my 1990 Audi 90. I reviewed the wiring diagram of the vehicle and the instructions provided with the kit. It took couple hours to install it. I needed to remove the driver side door panel to attach the wiring to the existing actuator and wire the box to the vehicles electrical harness below the steering wheel. I am very happy with the product, it has been working very well.
J**N
Don’t buy
This thing did not work and did not come with good instructions
C**E
Did not work
Did not work
A**I
muy buena
muy fácil de colocar y muy funcional
E**K
Wiring Diagram
I bought this with two power actuators for my doors. It works like a charm however, I had to search quite a bit for wiring instructions, as my vintage Jeep does NOT have a central locking system. The wiring directions could be a lot better, but if you have trouble I suggest you use the diagram I included.
C**N
Bad instructions but works
No proper instructions, here’s what worked for me after trial and error. I hooked it up in a 98 Chevy 1500, I bought this along with 2 lock actuators both with 2 wires on them as I only had manual locks.
M**S
Good unit
The weather this winter has precluded the work of installing the system, but the product looks well made, with good instructions for those with some knowledge of auto wiring circuits. I will proceed with trying to install it once the weather gets a little better.
D**P
For the price absolutely fantastic! I did find the wire a little thin ...
For the price absolutely fantastic!I did find the wire a little thin but it soldered no problem, I did also change the fuse holder because I had a waterproof one kicking around, the antenna wire I wrapped tape around at the box and sandwiched it back into the box just so the solder would never break for antenna, been on the car a week and super happy, very well detailed instructions too
S**S
Not for a novice
Works great, but needed a lot of creative imagination to decipher the installation instructions. Installation would be a snap with clear instructions.
Trustpilot
3 weeks ago
5 days ago
