MoKo Microsoft Surface Pro 3 Case - Rotatory Detachable Type/Touch Keyboard Cover Companion Protector Case for Microsoft Surface Pro 3 12" Inch Tablet, Light Blue

It is well made just not designed properly. I have ~5 problems.1) I can't access the SD card slot while in the case they could probably fix that by removing the back and the unnecessary/useless hinge on the case (dead weight) and using the built in one, plus the reduced ability to adjust the screen.2) It makes a light tablet noticeably heavier.3) Covers vents. I think you can solve that by using smaller straps on the side that maybe go over the volume & power buttons (Covers less vents and protects finish on buttons.)4) Like someone else already said the pen holder is upside down and the elastic thing is annoying and I think it will wear out the finish on the pen and the buttons from unnecessary pressing etc. I want slot like you have on the slim case.5) The bezel around the screen is too thick. You would reduce weight also if you made it thinner and one could interact with "things" in the screen corners much easier. Since this is suppose to be made specifically for SP3 why just the corners and MAYBE smaller bezel around the top connecting the corners to provide a no touch surface for the cover or keyboard etc.6. Like I said the corners are exposed.7. To really make your product stand out how about some attached port caps or covers. Im talking about charging, usb, headphone, display ports that are protected from dust, sand from attached (loss-less) covers.Your company seems pretty coo,I hope you plain on making an okay product even better. But I cant use this as is and must return.

Ive had it for 2 months now.Pros-I like the ability for it to stand at 3 different angles for viewing.-A durable case, with decent protection.-carries like a portfolio.-can close fine with keyboard in it.-All ports are open except for the microSD card (but I don't know what all the bitching and complaining is about, about not being able to take it out. It's essentially there for extra permanent storage. Put it in, and leave it there.)-you can detach the top cover and walk around with just the back cover and have a place to slip your fingers for gripping. (See pics below)-your pro sits solidly in the case with no wobbling.-typecover keyboard magnetizes to the screen without being hindered by the cover.-nice lil pen holder at the top. (see pics)-I can't think of anything else right now... Just the price was awesome for what it is. I would highly recommend this to you if you don't want to pay 55$ for the "armored" stuff they make, and you are responsible enough to not let it drop or crash to the ground, and if you are business professional and want to look good.I'm in PA school and I approve.Cons-i noticed the fan kicked on when I was charging my pro and watching Netflix. With the case on, it got pretty warm. Am I concerned the case will overheat my pro? Not really. I anticipate it to get warm. And it is vented to a good degree. Maybe an inch worth of the vent is covered on the right side of the device from the case. So this isn't really a con. Just something worth mentioning since the other reviews thought it might overheat their product. Had it for 2 months I almost never watch Netflix and charge my device at the same time anyway.-minimally heavy with the case, but, if you detach the front cover and the keyboard and walk about like its a Tablet it really is nothing at all. When i walk about i just detach just the keyboard. Keep the entire case on. I'm a bony thin 106 lb girl and when or if I get tired, I hold it with both hands or I cradle it to my body and it is fine.

The cover is of good quality material. It is specifically cut to fit the Surface Pro 3 and has cutouts for the speakers and all ports, camera, and buttons are easy to access. It's able to connect with the MS keyboard easily; however, it doesn't allow the keyboard "tilt" magnetic connection with the case on.Huge pro is that this case makes it easier to use the computer on knees or in bed v. the kickstand. It also makes holding the SP3 a LOT easier due to the hand loop on the back - this was the main reason I purchased this cover. I bought the rotatory version because I like the option to have the computer in two different views; it supports both positions well. Overall, very pleased and I hope that it holds up over time.

This case would be worth $50 at a best buy. Its definitely worth the listed MSRP, but I'm glad they sell it for $16!!! The quality of the product is worth more than that. I bought a rotary case for my SP2 and I absolutely loved it. I expected the same quality product for the SP3, and to my surprise, it was of even better quality and craftsmanship!. I couldn't recommend a better case for the SP3. You can't use the kickstand, but with this case you won't miss it.EDIT: after a few days use I found a major issue. The magnets at the top and bottom that hold the SP in place cause interference with the digitizer, thus making anything I write very distorted. I will write the same sentence with the case on, then re write it with the case off and the difference is night and day. I'm gonna try and remove the magnets so hopefully that fixes it. Magnets were a well-intended feature, but unfortunately they weren't thoroughly testedEdit 2: I had to remove 13 magnets!.. But finally it writes like it's supposed to. But now I have little holes all over the case :/ oh well

This is a good case to have for your Surface Pro 3. It fits mine pretty well and it even has a little loop for my pen. However, if you have to take it with you a lot, it can get quite heavy and takes up a lot of space. Also, if you're using the type cover, when you close it, it will not close your Pro. You'll have to manually do that yourself.The outer case is detachable though so when you don't want it, you can just pop it off.A little warning, just like most cases, it can get dirty after a while so you'll still have to clean it.

This case is gorgeous, perfect for Surface 3 Pro.

I bought the hot pink case for my Surface Pro 3; it's really more of a baby pink. Other than that, I'm very happy with this purchase! This case suits my needs perfectly. The built in stand for the case works great, regardless if I have my surface standing in portrait to read a textbook PDF and do some highlighting, or if I have the surface in its usual landscape orientation. I have no overheating issues, the camera is not obstructed on either side, my surface doesn't slide around inside the case, and it's easy to get the case on. I'll be buying this case in another colour to accessorize a bit :)

It fits perfectly, and it is very functional. I recomend it 100%. I had another cover of the same brand and it was nice, but this goes one step further.

I got the slim folding cover case for the Surface Pro 3. Case works great, has a nice velcro flap to hold the surface in place. Adds some substantial padding to the unit making me feel safe using it. Quality is good, case has a nice feel to it. I was worried the edges would annoying when using the pen but I do not even notice them when writing or drawing. Recomend it.

Sleek and not bulky have it for few years now and very happy with it

Compré la surface para llevármela a la universidad junto con el teclado. Esta funda me permite proteger la tablet y además, llevar el teclado incorporado, por lo que es perfecta.El color verde es muy bonito y la gran variedad de posiciones que da la funda te permite usar la tablet de múltiples maneras.5/5 :)

This item came in a box....very well packed. My congrats to the seller. Highly recommended product. Excellent quality and very useful and well thought for transportation.

Looks and feels good as well as fits pretty well. Though it could fit a bit better and the stand on the exteriors is not that great and could use some stronger supports. Also has a great pen holder that is much better than the one on the keyboard.

Verschiedene Positionen und Winkeln sind möglich, Tastatur passt ohne Probleme rein, schönes Design und gute Qualität! Diese Hülle ist zu empfehlen.

i bought surface pro1 casebut i received pro 3 case

The design is quite elegant. I like the different angle settings and the built in magnet for the Surface pen.

Amazing best case by far and believe me I have many cases

High Quality for my Surface Pro 3. I love the rotary features and the stand position mechanism. It has a holder for the pen. Fits exactly and neatly. I highly recommend it.

As advertised. Good quality at this price.

Super Schutzhülle!!! Die Funktionsweise ist sehr durchdacht!!! Super und recht Modisch! Würde ich wieder kaufen! Mal sehn, wie lange sie hält!