Makita 199140-0 39" Guide Rail

Works great!

excellent

Great guide for my Makita track saw. Save a lot of effort. Wish I would have bought these years ago.

I recently bought the Makita SP6000J1 Track Saw. I added the 39" track after reading a couple of reviews for various brands of saw in which the reviewers commented that the shorter length track was the most used piece of track they owned. My experience has been similar. Having excess track hanging out at the ends presents a risk of knocking the track off the work or bench and likely ruining the work, track, and saw. Keeping it as short as practical reduces those risks. The Makita SP6000J1 Track Saw can be purchased with the 55" Track and that is what I did and recommend. I also bought a second 55" track so I can rip plywood. As other reviewers noted, having the 39" version is frequently handy for the shorter cuts; but, I also find it convenient for ripping stock that is less than 7 ft long by adding it to a 55" section to produce a 94" track facilitating an 84" cut. There is a lot of value in this line of product. I wish I'd purchased the track saw stuff a long time ago.

Does the job

Works great, easier to handle than the 55” rail. Not cheap, but now matches my Makita track saw.

I'm admittedly a Makita fan boy, but their cordless track saw and guide rail setup is amazing. Both work great, cut super clean and straight as an arrow. The track sets up easily, just make sire your saw is zero'd out, and rip through the rubber edge guide before your first cut. After that it's smooth sailing. Can't wait to get some longer track to go with this one.

Per usual Makita has gone above and beyond in quality and precision. Has grip on the bottom so you aren’t required to clamp it down.

Die Makita 199140-0 Führungsschiene, 100cm ist ein gutes handliches solides Produkt was ich als Handwerker gut gebrauchen kann. Ich nutze die Makita 199140-0 Führungsschiene, 100cm für kurze Holzschnitte z.B. Querschnitte oder Längstschnitte mit der Handkreissäge von Makita mit passen den Führungsschienenadapter für die Handkreissäge von Makita und als Verlängerung für meine andern Führungsschienen z.B. 140 cm und 150 cm u.s.w. von Makita. Zum Verlängern benötigt man ein Führungsschienenverbinder von Makita der separat käuflich erworben werden muss. Ich bin mit dem Produkt und Ergebnis zufrieden und setze oft dieses Produkt ein. Wichtig ist das die Makita 199140-0 Führungsschiene 100cm gerade ist und nicht krum. Was zubeachten wäre. Fazit: Die Makita 199140-0 Führungsschiene 100cm ist klein handlich und schnell einsetzbar auf der Baustelle oder zu Hause. Ich als Handwerker kann dieses Produkt gut gebrauchen und weiterempfehlen.

Great but the saw it came with wasnt set up from factory and wrecked one of the tracks by cutting into it saw was out of line .

Très bien

I hummed and ha'd over buying one of these for ages. I have a lot of Makita power tools including a circular saw, jig saw and router but have never used a rail like this and have tried to make do. I've thought of all sorts of cheaper alternatives - use a spirit level (but clamping it can bend it), use laminate flooring (but that's the same cost and is brittle), buy cheaper (but then have a potentially inferior product and a nightmare on getting adaptors etc.). In the end, I bought one, and some clamps...separately. I'm so glad I did. The rail is strong, weighty, but not heavy and VERY good quality - exactly what I expect from Makita. It's way better than I thought it would be and is an investment that will last me a lifetime. A few things on the design, the clamps DO run along the underside meaning you can clamp very close together. the rails on the underside are strong and look like they will stand up to abuse. The bottom has three separate rubber runners that help hold the rail in place. These are softer to prevent marking wood or countertops etc and even if they wear out, you can buy replacements. The top rail is deep for your adaptors and gives confidence the adaptor (and therefore your power tool) won't jump out during use. There are also holes either end that I've used as hook holes for hanging the rail on the wall when not in use. These do fit together if you want to extend the length and they are such good value on Amazon I'm thinking of getting another straight away....you do need the connector kit although non OEM products are also available on Amazon and are a lot cheaper - If I do buy them, I will review in due course. So....I wasted a lot of time trying to think of ways of replicating one of these more cheaply....I wish I had just gone and bought one earlier. Top product.

Mooie handige rails. Past ook op mijn Festool zaag. En een stuk goedkoper.