Rear Window Defroster/Defogger Tab Bonding Repair Kit 2000

This product is exactly what you need to repair a broken defroster cable. If you're willing to do it yourself, you'll save hundreds by avoiding a professional repair job or even a window replacement. Best of all, you can do this from beginning-to-end in about 30 minutes total. I ordered this to repair a broken rear-window defroster cable on a 2017 Jeep Wrangler JKU Rubicon. I followed the very clear instructions, and even watched the how-to video to be extra-sure of the process (video is available on Youtube, and a link to it comes with the product). I sanded-down the base of the contact clip, mixed the epoxy, applied it to both the clip and the window, and put the clip on the window. It held securely. Since it was about 60 degrees outside, I used a hair dryer to apply direct heat for about 30 minutes to dry the epoxy. I then let the vehicle sit for about 2 hours to fully set-up before connecting the electrical cable to the clip. After doing so, the clip/cable were both solidly in place. I ran a test the next morning to ensure the defroster worked, and BINBGO! The defroster works just as well as it did the day it was new! Do yourself a favor and get this to fix your broken defroster cable. It's simple, inexpensive, and most importantly, it works! You'll be happy with the time & money you save by doing it yourself!

Perfect for the jon

Good product - excellent adhesion. Allowed me to repair the rear window defroster on my 2012 Chevy Tahoe. Color matches the black of that area on my glass, so the end result looks great. Functionality of the electrical circuit is restored and I have a clear rear window again. I am very happy with the results and recommend if your rear connector has come off.

worked well for fixing my rear defroster tab. Just make sure it’s warm out when you use it. 60° or warmer. It doesn’t work well in cold.

I was pretty bummed when I found the rear window defroster, in my Jeep, stopped working. The wire had come off the glass. I tried a couple of things I thought would work...fail. I thought about soldering it, but I was told the glass could shatter (heat loading the glass). I saw this and thought "why not". If you follow the instructions (pay attention to the outside temperature) and it works GREAT. I was thrilled when I got my rear defroster back. Highly recommend this stuff.

This reinstalled wires on rear defrosted grid,holding very good.

Worked awesome! Mix 50/50 of both tubes and stir together. Thickens up like JB weld and adhered to glass and tab very well. A little pricey for what it is, but I have used the cheaper ones before that only work 50% of the time. Would definitely recommend.

Product directions were followed but seemed like the liquids were too old and dry. Did not adhere well (yes I did use the hair dryer to set it properly) and came off immediately the first time the rear window was closed.

This is the actual serious product to fix not that cheap glue from permatex

PRODUCTO 100% CONFIABLE

As promised

Buen producto

seems to work well , i have tried other products like this , this seems to be the best but also the most expensive