TotalBoat ゲルコート

Really good gelcoat; I used a 2.5mm nozzle and a bit of thinner, about 1oz/pint of gelcoat. Watch the hardner, the label says at 75F use 78-82 DROPS of hardner per 4oz of gelcoat, do NOT transpose that into 320 drops per 16oz or you will have a 16oz white hammer head, and with thinner it will go to about 200F and actually boil - no bueno. Get a 5ML measuring glass tube and measure hardner carefully, check out Totalboat website too. MORE!!! On my 17'6" Whaler I used too little of this; I would say use 8-10 qts [depending on what you want and what you are covering] for this size boat. Reasoning; You must put coating ON to take coating OFF, to smooth, sand down using 1000 grit or 1200 grit to get that mirror finish. If there's too thin a coating, you'll be taking it ALL OFF [like a girl named Susan that I used to know] and never get it as smooth-mirror-like.

I made the mistake of buying a cheaper gallon of gel other than Total Boat and I paid the price. That gel sanded horribly and I went through way more sand paper than I should have.This Gel is always fresh and does the job great as always.

Easy to apply and stays on well.

This product is thin almost like paint so it will take time to get a buildup on the bottom of a boat ,but I am very pleased with the results. I especially like the catalyst it is liquid and you can get precise ratios one drop at a time.

Great product, very easy to apply to the hull as a final coat. This gelcoat is much easier to work with around 70-80*. I used a 1/4 inch nap, no lint roller to apply the gelcoat. Now it’s time to sand and buff.