Dremel GS45-01 Glue Sticks

Delivered on time, good quality

These things work a charm and going on purple lets you see exactly where you've put the glue. I used these for a 3D printer and that said, I've since switched to a PEI bed rather than the glass one I had been using and no longer have need of glue sticks. I'd usually get a few/several prints off one or two applications but after a while the buildup affected adhesion and cleanup wasn't quite as easy as swiping the glue ON was.

While this may not work(haven't tested for other materials) PETG sticks very well to it. Clean bed while warm not hot, with water. Then one good wipe with isopropyl. Then let dry. Once dry do not touch, then add a single layer of this to it...let dry then warm bed up and print as normal. Do not touch. If you touch your finger oil will ruin it, and just a little touch is enough to mess it up. After printing you will not need to remove it, it literally pops off by itself once cooled. Again, printing dozens of prints with this stuff and PETG combo, and I have no issue with it.

I really try to avoid using glues with my prints as I find it to be a hassle. My latest printer has been hard to find my prefered spring steel bed plate for so i have been using the blue painters tape with glue method. I much prefer this type with the purple color as its easier to tell where you’ve applied it versus the standard white color. Only gripe is the glue sticks seem to run out quickly. Still, this is a cheaper and more effective option than some of the liquid applicated glues for printing ive tried here on amazon. You should be able to get a decent amount of prints before needing to reapply.

I’m brand new to 3D printing (literally used these glue sticks for my first print ever), so take this review for for what it’s worth. I’ve been printing ABS without a heated bed on my cube 3 and haven’t had any problems with warping or adhesion using this glue. I’m not claiming everyone will have the same results as me, but so far this has worked great (Note: I’m also NOT printing long flat pieces which I’m guessing will still warp?). This goes on purple, dries clear, and is easy to clean off when my prints are done. Definitely recommended!

When the glue stick that came with my Qidi Tech X-One 2 ran out, I purchased a package of UHU Glue Sticks after reading favorable customer reviews. However, they did not work well for me at all. I was losing 50% of my prints to poor platform adhesion. The Dremel GS45-01 Glue Sticks, however, exhibited the same print adhesion performance as the stick that came with the X-One 2. My prints stick now and I don't see any warp. I will definitely be buying the Dremel GS45-01 Glue Sticks in the future.

I ordered these glue sticks to help secure my 3D prints to the build plate. Works like a charm. And the three pack was a pretty good value.

I was having adhesion problems with my FLSUN QQ-S Pro. Many failed prints over the last month. I set the Z height too low, and managed to get adhesion, but it messed up my bed coating. I got a PEI spring steel magnetic plate, and even that really didn't help. Tried hairspray, no go. So I figured I'd try these glue sticks before I spent more serious money on specialty bed adhesives. Well, it actually works. The purple helps somewhat in knowing where you've applied the glue and where you haven't, but it helps more when a print is done and off the bed, as you can use plain hot water to clean the bed thoroughly, because the glue turns purple again when rehydrated. This is a huge help, as a clean bed, then glue application, seems to be what's working best for me. In any case, very happy and will be buying again, if the 3 pack doesn't last longer than the printer itself!

Excelente producto!!! cumple con su función principal, ya que mis impresiones ya no se despegan de la cama, la cual es magnética en una Ender 3.