Canon DC Coupler DR-E6P

Plug and play A/C power battery adapter for a Canon R5 Mark II. (You'll need the power brick that plugs into the wall, too.) It does exactly what it's supposed to - power the R52 in video mode. This replaces the DR-E6 batter adapter. Worked exactly as expected with no issues whatsoever.

I use the Canon DR-E6P Coupler with my Canon R5 Mark II with a Kondor Blue male USB C to Ptap which I plug into a V mount battery. The Kondor Blue cable is 65w PD compliant and the V mount battery is 100w PD. I understand the camera won't power on with less than a 65w PD cable. All features of the camera work without any issues. So, no you don't have to have the AC adapter to use this coupler even though Canon doesn't promote using the coupler this way. Obviously many people use this in the field with V mount batteries since AC power is not readily available. Canon should realize this is the way this product is actually used and stop trying to infer that it can only be used with the Canon brand AC adapter.

Does the job, no more swapping them tiny OE batteries

None of my USB-C power adapters will power this thing. It only draws 6W or so when using my R5 mk2 as a webcam, but if I plug it into a 45W USB-C wall adapter, the camera refuses to turn on. I eventually figured out that it works with this big backup battery I have, but only if that backup battery isn't simultaneously charging. I can run my LAPTOP from that battery while it's charging, but not this camera battery adapter. I guess I just have to plug in the battery to the wall at night and to the camera during the day. What a disaster.

Works great with canon r5 ii. No complaints and works well for photos and c-log videos.

Purchased this for use on my new R5mkII cinerig. I have run some tests with common Vmount batteries here in my studio, details below: Stated specs from manual of Canon DR-E6P. Note these are not stated as voltage ranges, rather worded with "or" between. Could be translation issue: INPUT: 15v or 20v DC OUTPUT: 10v or 7.5 DC Onto my direct tests. I only recently switched to vmount for my main system, so while I have a small testing pool it should be informative. Some good and bad: >Smallrig VB99: Works at nominal 20.1v DC through USBC port, also able to power my Atomos Shinobi II simultaneously through dtap. Camera pulls approx 15w when recording in 4k fine. Seems to passively draw battery even when camera is off @ .1watt >Smallrig VB50: Camera does not work. Shows 15v DC activated on battery display, but camera will not power cycle. Unfortunate as this is my favorite lightweight battery, just bought it. >Neewer Mini 6800mAh Vmount: Works at nominal 20v DC through USBC port, also able to power my Atomos Shinobi II simultaneously through dtap. Clearly there is a spec requirement on the DR-E6P; >The stated specs on the VB50 are 45w PD3.0, and the VB99 is 65w PD3.0. Canon states the r5mkII needs "45w and above". In theory, the VB50 should be good, but clearly there is a discrepancy. Perhaps it cannot supply the 20v needed? >Could the small wattage difference be the issue here? Or is there more to it, such as the stated spec being incorrect on either the DR-E6P, or on the batteries themselves? >Could a DTap-USB C adapter work to power the camera via the VB50? I am using the Dtap to power my monitor, but conceivably the monitor could use a different source such as the DC jacks. More testing the follow, in talks with Smallrig engineers to learn more.

Who would have thought that a part number listed with Canon would actually be less expensive on Amazon?!?!?!?!? When I got the canon label produce, and installed it on my R5m2...it worked!!!!

The Canon DR-E6P is a plug-in replacement for the Canon Battery Pack LP-E6P. I've read that the battery pack is capable of 65W peak output suggesting that it could be PD3.1 compliant. If correct, it makes sense that to power the DR-E6P will also require a PD3.1 compliant supply. I purchased from Amazon the Anker A1289 (Anker Power Bank, 24,000mAh 3-Port Portable Charger with 140W Output, Smart Digital Display) which is PD3.1 compatible. I have a Canon Cooling Fan CF-R20EP connected to the bottom of my Canon R5 Mark II camera. I plugged the DR-E6P into the left battery slot. I haven't field tested it, but in my office it works fine. Photos attached showing the camera recognizing the DR-E6P. I will update this review if I find any issues with this setup. It took 4 hours of 4k fine 24 fps recording before the Anker power bank discharged from 100 to 25 percent in an extended video recording test.