Mount Compatible with Oculus Rift Sensor - 3-Pack - Tape Included

These work exactly as described. The adhesive is strong -- I'm a little worried about removing it later, but hopefully it won't rip the paint off. These are printed with a 3D printer, in case you didn't read the description -- it's clearly stated. I have a 3D printer, but I figured that this was easier because I'm new at 3D printing and needed these mounts right away. It's a little pricey, but for the amount of work that goes into printing these, the price seems fair to the person who created them. My dad always says, "Never begrudge a person their profit." So, while these are pricey, realize that they take hours to print, then they have to pack them up and ship. So a 2-pack for this price is decent since you'll only likely be buying these once. Great little tool for people without 3D printers or if you do have a 3D printer and don't want the hassle.

I ordered these not really expecting much in the way of quality or sturdiness, but they're perfect. The sensor's mount rod slips into the groove firmly, although there is no audible "snap" it sits securely. The angle of the the slot combined with the articulation range of the sensor itself is just right for my own setup(3 sensor, 10x9ft area) but because the command strips use velcro to snap together you can easily angle the mount itself for a more extreme downward angle if needed. As for the command strips themselves, they stick firmly to the wall. I had to move the position of the entire mount and it unstuck and restuck snuggly to a new location without much effort. Great mounts, would buy again in a heartbeat if I needed another sensor. Very effective and much cheaper than other mounts on the market.

The mounts get the job done very well - No issues installing the sensors within, and they make room for both the cables to cleanly run through and the head to be tilted up and down some. However, the included tape might not play nice with your wall; although it was definitely strong, it lost it's strength within a few days and dropped my sensor straight onto the wooden floor. Be careful with this - I used industrial strength velcro ever since and have had no issues.

So I have loved star treck bridge command and especially beat saber for my vr but my pet cat kept disrupting my games. The problems with having the vr sensors using their normal stands was how my desk would have to be clear and the cat could sit in front of them. I ended up having to have my SO patrol the room for the cat to keep him out of the way of the sensors which was no fun for me, her or our furry friend. I looked up wall mounts for the sensors and these popped up for my two that oculus included and they came with adhesive! The install was suuuper easy and they accommodate the cable as well as the adhesive is good as of right now (about two weeks) so we'll see how well it holds up. Now I was slightly worried about the build being from a 3d printer but the quality and build is totally fine and doesn't feel cheap so that ended up losing no problems. PROS: -Inexpensive -Well built -Color matches sensors -Included a coupon towards future purchases -Easy to install -Has room for the USB cable! CONS: -While not an issue now, the 3d printed material may not hold up to constant sunlight or abuse so if that applies to you take caution -Adhesive Velcro combo could be a weak point in later months. -Has no rgb? (Haha) Since these have been up I feel my tracking is alot better and the cat can't terrorize me :)

As the header says, I mounted these directly on a "popcorn" plaster wall and they're doing great several months later. The adhesive tape is good quality, and the plastic on the mounts seems to be fairly thick and strong. Simple and effective product that I recommend. If you're mounting these on a wall like mine, here's what I recommend: locate where you want them mounted, clean the mounting point on the wall with rubbing alcohol and a lint-free rag (be careful - this can possibly fade or eat away at paint if you aren't careful), press and hold the mount against the wall for 30 seconds while the tape sets, and then do not disturb them for an hour or so.

Was nice and clean setup with only leaving Velcro on the walls. Was able to remove tripods and save some space. When unpacking the sensors I noticed one of them cracked along the side causing it to be unusable with my sensor. I love how they simplify my setup but am worried that the other two may crack. Worked well until it cracked, worried the other two will follow soon.

Love these and they work great with the Oculus.

These little things are awesome. I was surprised how small they were when they arrived, but I appreciate this minimalism. And they're obviously 3D printed, which is kind of cool. I appreciate the ingenuity that went into identifying the need for this kind of mount, and designing them. The actual design is great, too. It's easy to put the sensors in, and I didn't have any issues adjusting their height, angle, etc. I especially appreciate liberating my sensors from their bases, since the stock sensor stands have a fairly large footprint, which took up more desk and shelf space than I would've liked. The adhesive strips work great so far, too. I'm not sure why others have had issues - I think they may not have applied the strips correctly. Just be sure to clean the wall and the back side of the mount first, give them time to dry, and be sure to press firmly and hold down for a few seconds when you're applying the strips. I've lived in various dorms and apartments in my life, though, so I'm a seasoned veteran at using the things by this point in my life. The only downside I've encountered is that it took some trial and error to get their placement right when first setting them up. But I'm not going to count this against the product, since it's an engineering limitation inherent to the rift's sensor system. I was able to put the mounts up temporarily with some aggressive masking taping. And I'm glad I did, because I needed to move each sensor a few times before the Rift software accepted their locations as being kosher. All in all, I'm very happy with this product, and recommend it without hesitation.

Works wonderfully and firmly attaches my sensor set up to my wall. Tad bit disappointed in the price considering all it is, is plastic but meh at least now I don't have to permanently screw something into my wall.

They are made from a 3D printer but the plastic seem to be of good quality, I was able to hook all my 3 sensors (2 front 1 back) on the wall and it took about 45 min to set them up as they are fixed in place and the Oculus sensor kept telling me to move them, all in all they work perfectly and improve tracking as well.

These are lovely little mounts, I thought I might have issues with being able to swivel the sensor left and right but they work really well if you pull them up and out of the mounts about 1cm. My guess is that over time the mount will loosen up but that can also be easily fixed just by adding tape to the inside of the mount to snug it up and So far I've moved these mounts 4 times with the same Velcro strip and I haven't had any issues nor has the mounts loosened up the grip at all. 10/10 Great mounts and I would definitely buy them again should I ever need them

should have heeded the other reviews, works great first week or two, loved it, i woke up this morning to see one oculus rift sensor on my desk, fell right off the wall >:( look elsewhere for a more permanent solution. while these are cheap, they are not cheap enough to replace every week and a half. not to mention the risk of damaging a sensor which are expensive to replace. i put it back up on the wall and i'm gonna tape it but if it goes down again i'm going straight to amazon for a refund, only reason i am not refunding right away is because i need it wall mounted. i'm gonna be looking for another solution, very disappointed with this.

Very happy with these. You may take them out of the box and question the quality, as the print resolution isn't amazing, but that means nothing, don't worry. The fit for the cable and sensor stem itself is nice and snug, and the included 3M Command strips work great and stick to the mount and the wood rafters very well. If you need more downward angle, then you can mount them on an angle like I did, so the generous left/right pivot can give you more downward angle.