Description The HDMI extender provides extension of HDMI signals long distances over a single CAT6/7e cable, it supports high resolution up to 1080p, support EDID copy and loopout function. The extender can use for a wide range of applications requiring long distance transmission of high resolution with high quality by its good stability and powerful security. Features 1.Transmits HDMI video and audio signals up to 60m over a single UTP CAT6/7E cable; 2.Support video resolution up to 1920*1080@60Hz; 3.Support EDID copy function, can match many kinds of display device;（EDID button function: Press 3 seconds could automatic adjust the TV information and if power off ,also remember it.） 4.Support bidirectional 38KHz IR. 5.Support POE Power function, a power adapter（12V/1A）only connect TX . 6.Transmitter support ; 7.Follow the standard of IEEE-568B. 8.Compliance with HDMI 1.3 and HDCP 1.2 standard; 9.High compatibility, can auto-match source and display device; 10.Built-in automatic adjustment system, make the image smooth, clear and stable; 11.Built-in ESD protection system; 12.Simple to install, plug and play; Packing List 1.HDMI transmitter ……………………. 1 pc 2.HDMI receiver ………………………… 1 pc 3.12V/1A Power adapter ………………… 1 pc 4.IR blaster extension cable ………………1 pc 5.IR receiver extension cable …………… 1 pc 6.User manual ……………………………… 1 pc FAQ : 1. Power on Transmitter. 2. EDID button use, such as the connection after the launch of the P, S, light, the receiving end of the indicator light, no display or color, the transmitter power to the HDMI port of the monitor and the transmitter HDMI port , Press the EDID button until the S light flashes, stop after the restart power, repeat 1-5 steps can be.
4**S
Works as described
I am using it to extend the HDMI monitor, mouse and IR remote control from my Lorex security camera NVR in the basement, to my Office upstairs.so 1 transmitter, 1 receiver, connected point to point via a cat 6 cable.The Lorex unit is designed to be used with a local monitor/mouse/IR remote. This allowed me to have the monitor remote from the NVR.I am also using a KVM so I can share the monitor and mouse with my computer, to save desk space and money.NVR>extender TX> cat 6 > extender RX > HDMI KVM > Monitro/mouse.The unit is a metal box, very solid. no play in any of the connectors
B**K
Works well over CAT6
This works well over a dedicated CAT6 line. Originally I tried using this over my existing 1Gbps CAT6 home network, while it technically worked the framerate wasn't that good and it caused my internet to become slow and unstable. However once I ran a dedicated CAT6 line from the sender to the receiver it has worked very well with steady high framerate.One other thing I noticed is that a cheap USB mouse would not work over this unit (I believe because it wasn't USB 2.0) but a newer USB mouse worked fine.
L**Y
Worked for 2 months, then failed
I purchased the TX RX pair of KVM over IP devices. They worked pretty well or 2 months. After 2 months, the system spontaneously stopped working. Now the TX seems to be working, but the RX cannot connect to the TX. The ethernet interface on the RX is not coming up, even on an isolated switch.The hard reset buttons don't seem to do anything except force a reboot. The IP address on the TX is different than that given on a factory sticker. The RX is not transmitting packets at all.
I**1
Worked on CCTV
Easy to install & it worked great for video surveillance remote monitor
G**G
It works so far with little hiccups
I hook it up it works however I did see in between a movie the signal again dropped and came right back hope it was just a hiccup I would need to spend more time in order to see If It was one time thing or IF it will be rock solid. I am hoping it will be rock solidBy the way this is for 4k signal @ 60 hz HDR 4:4:4
B**D
Works well!
Works very well delivered on its promises
L**Y
Works great
So far so good. I bought a cheaper set and had lots of problems. I plugged these in to the same cables and they are dramatically better.
C**E
Four Stars
It wont work over more than one switch. I had to return it.
Trustpilot
3 weeks ago
3 weeks ago
