High Flow Air Blow Gun with 9 PCS Blower Tips, 6 inch Extensions, Needle and Rubber Tip, Xtreme Flow Nozzle, Adaptor, 120PSI Working Pressure, Air Compressor Accessories Kit, Cleaning Air Tool

This replaced a less than $4.00 Harbor Freight blow gun with the 2' extension, so not hard to look good, but this gun has the force to make things move and get the job done a lot faster. It cycles the compressor more frequently, and It makes more noise, but the increased flow makes it much more useful, and I probably should be wearing ear plugs anyway. All of the 1/2" x 20 threaded attachments have a knurled section, for improved grip, and nice clean aluminum threads with replaceable O-rings, so no leaks. May need to be careful about cross threading or dropping attachments and damaging the threads. The included tip adapter allows the use of attachments having the common everyday M10 X 1mm thread, which include the small needle tips in the kit and the poorly threaded 2' extension on the Harbor Freight blow gun. No O-rings on these but none leaked when tested. Would like a longer, solid, about 2' extension, without adding 6" extensions together. The Harbor Freight extension on the old gun will work and I think with a minor modification the flow can be improved on it, but the larger diameter of the Wynnsky extensions do make a more rigid option with better flow. This is a nice gun, and I am happy with it, especially for the price.

So far so good. I bought this to replace a unit I bought at Harbor Freight a few years ago. The old gun's nozzle extension kept popping out so it was time for a replacement. The build quality appears to be good in general and the flow rate is far better than my old one. The price was right and I hope it will last a long time. In addition there were no air valve leaks compared to some of the other cheap ones I have had in the past. Lets face it...some things are cheap enough to just replace if you dont have to worry about breaking a finger or skinning some knuckles Remember also that good tools are less expensive the a trip to the ER. I'm used to tools that last for a "lifetime' and most of my other tools are of high quality ( Snap-on / Mac/ Matco / Craftsman pro series) and I trust them to do the job with out breaking. I woulden't put this tool in that catagory but it certainly is getting the job done for what it is.

The air blower has been a great addition to my shop. The high flow design really moves air, making it easy to blow out debris from tight spaces and equipment. I like that it comes with multiple tips, including the needle and rubber options, which make it useful for everything from inflating small items to cleaning delicate parts. The 6 inch extension is especially helpful for reaching into engine bays and other hard to access areas. Build quality feels durable, and the trigger has a smooth, responsive action. It handles up to 120 PSI without any issues and maintains consistent airflow. Swapping between the included nozzles and adaptor is quick and easy. Overall, this kit offers excellent versatility and performance for anyone who regularly uses compressed air in their shop or garage.

I got to use the blow gun today, Spring cleaning the shop. Not really what I purchased for but figure I need to give it a try. At first the gun worked excellent and seems of fairly good quality. If I was to fault any on quality is the trigger is or looks a little cheap. As far as being high flow it truly does the job. So why the 4 stars? Well I sort of touched on the trigger being a bit on the cheesy side. But the actual part of the handle that I will ding it over is three or four times I pinched my point finger and developed a very small blood blister. I took some 1/2 inch shrink tube and covered the full length of the trigger handle. I then took another piece about and inch long and slide it up to the hinge part. After the I have yet to have any issues.

Give for my dad he love this they are good quality

This thing is awesome and very powerful

As expected.

You almost can't go wrong with this ridiculously comprehensive blow gun set priced just above $20. However the following are the things which value-seekers should know before purchasing it. 1. Approaching 90 psi or above, the brass trigger-valve is essentially all or nothing, open or closed, on or off. You pretty much have to use two hands to be careful enough to meter the air flow. And even then it's still frustratingly difficult for those trying to avoid having to coordinate the right and left hemispheres of their brain to accomplish something that probably should not be as hard as playing a musical instrument "well". 2. Because of the all-or-nothing airflow, there is an aim-disrupting kickback. The higher the air pressure, stronger the kickback. These two characteristics caused me to return the item. I already had a less-sexy air blower thing which did not have a pressure-sensitive aim-disrupting kickback (by virtue of its design). 3. The packaging says 90 PSI Max, and that makes sense due to the all-or-nothing kickback. 4. The precision air-tips are great, and one of my deciding factors in purchasing. Just know that they do not include o-rings. I was willing to overlook this and/provide them myself. However I returned the kit for the first two mention reasons. Now I am a fan of pistol-like things that shoot objects or air or water. But by virtue of its design, for higher air pressures, initial aim is imprecise with this blowgun. Summary: a very nice set which, for me, was crippled by the lack of a smooth-transitioning valve. If you're savvy enough, plan on replacing the valve (as also suggested by another reviewer).

Time of course will tell but it blows great, easy pull handle, seems to be very well made also. All the options makes it even better when you need specific type of blowing. Especially with the rubber tipped blower ends. It is almost impossible to find a decent blower any more that lasts. I have old blowers here from the fifties that still work great. Not counting on this one lasting that long but again... time will tell. More money than most of the blowers out there but all we were getting out of them was about two or three weeks at best. For the price it seems like great value.

This thing really blows! Especially with the turbo tip. Solid metal, didn't break when it dropped on the shop floor from the top of a tool cart. Good tool, good price. Way better than the composite air guns.

Used it to blow out the moisture in my car's headlamp and for kiddies pool. The attachments works like a charm

Versatile nozzle selection

Just note the ntp fitting is not included