eXtremeRate Top Bottom Decorative Trim Shell Compatible with ps5 Edge Controller DIY Replacement Front Back Clip Shell, Custom Scarlet Red Plates Cover Compatible with ps5 Edge Controller

I installed the eXtremeRate wood grain decorative shell on my DualSense Edge, and it completely transformed the look of my controller without interfering with performance. If you're into customizing your setup, this shell is a fantastic DIY option. ✅ Pros Color & Finish: The wood grain texture looks surprisingly high-end—not glossy or fake. It adds warmth and character without clashing with the controller’s original buttons. Durability: Snaps in securely with no flex or looseness. I’ve used it daily for two weeks, and there’s no sign of wear or chipping. Weight: Adds virtually no noticeable weight, which means the controller’s balance stays intact. Grip Feel: Despite being decorative, the shell doesn't make the controller slippery. I was worried it would affect grip, but the matte texture feels great even during longer play sessions. Comfort: No sharp edges or awkward fit—the trim aligns well with the controller’s ergonomic curves, keeping hand fatigue low. Easy Installation: Took less than 10 minutes. No tools required, and the clips didn't feel like they’d snap under pressure. ❌ Cons Not for Beginners: If you’ve never disassembled a controller, the idea of removing the original shell can be a bit intimidating. Watch a video tutorial first. Limited Reusability: Once installed, removing and swapping the trim again isn’t as clean or easy. It's best treated as a semi-permanent upgrade. 📝 Final Thoughts If you’re customizing your controller for aesthetics or personal branding, this shell hits the sweet spot. It’s functional, durable, and elevates the look without affecting gameplay. I’d love to test future texture styles if eXtremeRate expands the lineup.

So I've had the white Dualsense edge controller for about a year now and it's been awesome, it became my primary controller so it's seen tons of use and started to show the small drawback signs of the underside grip panel getting really dirty and it luckily hasn't started to get bad but the rubber is barely starting to bubble up I just received a 2nd Dualsense edge controller as a gift (Midnight Black) and even though it's all black so I don't have the worry of the dirty grips being a visible issue, I wanted to avoid the rubber bubbling up far down the road and also wanted to give it a more custom, personalized look at the same time After looking around online I discovered the eXtremeRate trim shells and reading reviews it was perfect for what I wanted I've had to get a little handy with some of my other controllers from past sony consoles replacing the internal battery etc. So I am somewhat familiar with tearing apart sony controllers but the dualsense edge is a completey different design from all the other controllers sony has designed with no screws on the outer shell holding it together so I was a little nervous about pulling the trim panels off to replace them. The video for the trim panel installation provided was helpful but I was nervous about breaking anything while removing the stock panels so I did some digging online and found quite a few very helpful videos on YouTube showing exactly how to remove the trim panels using the plastic tool kit provided with the eXtremeRate panels. The plastic pry tool kit provided is awesome eXtremeRate includes everything needed to install their products and even encluded spare parts for the controller They arrived super quick in just 2 days with no issues The grip feels just as nice and comfortable as the stock ones do, they provide an awesome improved appearance and fix the rubber bubbling issue the stock grips get overtime I love the look of my new midnight black dualsense edge and ended up swapping the stock white panel on my white dualsense edge for the stock black panel from my midnight black edition and when the rubber starts to bubble on the black panel I'll definitely be coming back to replace it with these, I highly recommend these to anyone who wants to improve the look of their dualsense edge controller and fix the stock rubber bubbling drawback these controllers have

The rubber on the grip started peeling back so I decided to look for a way to repair it. I opted to go with a replacement instead and I’m glad I found this! It’s a perfect fit and looks great! I see some other folks commented that it’s not a perfect fit and showed photos that had a tiny bit of space between the part and the controller. That’s an installation issue - not a product issue. Mine looked like that as well but I removed it and reseated it a couple of times at which point I got a perfect fit. The switch on the underside to release the top cover has a TINY spring that you have to be careful to not lose. So much for that idea! I lost it in a couple of seconds. Thankfully there were not one, not two, but three spare springs just in case and I’m so glad there were. I have no idea where I would have found a spare had they not had the foresight to include spares. My only complaint is it’s a bit expensive. If you opt to replace all of the panels and triggers, it will cost at least $100 USD (rough estimate) which is steep but hey it’s only money right? 🤣 Now to decide if I want to replace the other panels.

Beautiful finish, perfect fit and very easy to.replace. The feel is smooth and has good traction, so the controller will not slip from your hands. Great upgrade or replacement.

This is an initial review based on installation and a bit of use. I'll update if things change in the long run. The parts come well packaged. It all looks like a similar quality to the original parts. Installation was pretty simple, and it came with the needed tool and a link to a video guide, which got me through just fine. That took me about 10 minutes. Initial impressions are that the plastic does fit quite well, but you do have to give it some good pressure to get all the little bits to pop into place. I got the black one, and I like the matte finish. I think it looks nicer than the glossy top that came originally. The only real downside I've noticed so far is the grips are not as grippy. I think that will help them not to get so discolored, but the original grips did have a nice feel to them. These don't feel bad, just not as nice. Overall, it isn't perfect, but I would definitely recommend these.

Exactly what I needed to finish a matte black and transparent teal shell swap, on my Dualsense Edge. The kit eliminates the white grips that get degraded over time..it looks incredible, now. Both kits were straightforward, and came with a full replacement of screws and a link to the guide video that walks you through the whole process. The controller actually feels even more sturdy than the OEM shell did, as well. Excellent value.

I game a lot. The original vinyl rear grip pieces started to bubble like many others have experienced. So I bought some of those rubber adhesive grips that wrap around on the grip. They worked great, but only for a few months before they started to wear out. Next I tried one of those full skins, but the fitment wasn't great and the overall feel of the controller felt off so I returned it. Then I found this piece. Finally, a full replacement of the rear grip made of durable plastic - the whole piece is a non-slippery plastic, no rubber to be found. Fitment is perfect, feel is OEM. Finally I can stop worrying about the rubber grips wearing out and having to replacement them every few months.

I like it but unfortunately It's not a 100 percent fit on the Duelsense edge controller. It is easy to install on it, It does feel nice to hold, the color is beautiful on the outside but on the inside of it no effort was put into it to make it feel premium. The only reason why I got this was because sony version of this the grips was peeling off so I got this as a replacement.. not worth the $20 but its what i paid for in the end. I was hoping Amazon could at least give a partial refund at least but they were unwilling and would not look at the photo I provided. I would think about it before making this purchase .

Highly recommended fits as the original🫡👍

Excelente produto cumpre com o prometido.

Fácil de instalar, buena sensación y no despinta. El gatillo quedaba un poquito corto así que dejé el mismo y sólo reemplacé el resorte. El ensamble se ve perfecto como si así viniera de fábrica. Ojalá después vendan unos con material antideslizante.

Bought as the original controller backing and rubber grips had started to peel off. This is a perfect replacement and looks very good, just be aware that fitting it is faily fiddly and requires some patience.

ممتازه