Build Plate for Mars 4 MAX LCD 3D Printer, Replacement Build Platform with Laser-Carved Surface and Non-Slip Hexagon Socket Screws, Compatible with Mars 4 MAX, 204 * 129mm

The new build plate was EVERYTHING one would expect a factory replacement part to be... As good or better than the original! Not that my original had failed, zi just wanted a space to quick swap out and keep the printing going indefinitely. And of course these pieces are well build and solid enough to hold form and be built so precisely thst NO re zeroing of the printer was needed between the swapped build plates. A quick twist of the top tension know and I was into the next print giving ME PLENTY of time to work the previous print off the other build plate and prep it in time fir the next swap out. Doing this allowed me to continue project with nearly zero interruptions. Thank you Elegoo fir building such a great and robust printer with amazingly high Quality Control standards including these "replaceable" parts! You have earned a customer for life!

Works great. Just like the original, packaged well, and it was delivered on time.

I got this because my prints were having trouble with adhesion. I had unknowingly scratched my first print bed with the metal scraper that came with the Mars3 and then thought sanding it would make it better (it made it worse though in my case, nothing would stick to it). Getting a new print bed really helped with this. If you are reading this with the same situation, do yourself a favor and search and buy these two things: 1. PLASTIC RAZOR BLADE SCRAPER It will get prints off the bed without scratching it and it is 10$ and comes with approximately infinite replacement plastic blades. 2. Rubber Squeegee Water Blade Decal Wrap Applicator This is to mix up your resin when its sat in the vat for too long and also brush gently along the FEP to make sure there is no resin stuck to it and not mess up/puncture/scratch the FEP.

works great always good to have a 2nd one

Perfect fit

Excelente, todo muy bien

Obviously, you only buy this as a replacement part and only if you need it, so a review isn't too important. On the other hand, this is a really great build plate. It's gorgeous, it has all the right features. Five stars.

It fits my Mars 4 perfectly. I haven't had a single failure since buying it. The only issue I have is with the initial design of these plates is that the laser etching does not stand up to a steel scraper, which is why I had to buy this one. I now use a silicone scraper. This keeps the finish like new.

Me gustó el precio y la calidad

Buen producto