CC3D Silk Copper PLA 3D Printer Filament 1.75 mm 1KG 2.2LBS Spool 3D Printing Material Shine Silky Shiny Metallic Metal Copper PLA Filament

Well packaged and no leaks in the vacuum bag. I put it in the filament dryer for 8 hours and then printed with lot. Zero issues with adhesion or bubbling. It prints so smooth it’s perfect. This is the third filament from cc3d and I will definitely be buying more.

I almost never rave over a printer filament but I really love this filament! It is super easy/reliable to print with, it seems to not absorb moisture at all and it is less sensitive to heat deformation than the other brand of PLA I use a lot of. I print some parts flat then dip them in hot water until they soften enough to curve into their final shape. The Overture PLA that I also like takes seconds to become soft. This PLA takes significantly more time or more heat (still using only hot water though) to become pliable enough to bend. I print it at usually 210 C on a 60 C bed though I've played with both colder and hotter nozzle temps with good results and I'm very sure 60 degree bed isn't needed but it works super well for me so not going to change. Color (Copper) is darker than the photo in the Amazon description and it won't be as shiny as shown until you get down to around 0.2mm layer height but looks fine at bigger heights and also with a 0.6mm nozzle. Higher nozzle temp might also help add shine but I haven't played with higher temperatures much. One unanticipated bonus is this is not nearly as sensitive to humidity as my other PLA filaments. I did a weight test in parallel with some other PLAs when I found I needed to dry them out in a hot box setup and for some reason this hadn't absorbed much moisture at all with the caveat that I'm not in a climate most people would call humid though if I do not store PLA filament in a dry box it starts to pop and blob excessively while printing.

This might be the best filament I have ever used. It really behaves and produces fine quality results on Bambu Labs X1C printer.

The Silk Copper PLA filament is very pretty. The color is rich and very shiny. There is no actual metal in the filament so no special tips are needed to print with this filament. I had no trouble on my Ender 3 with my standard PLA settings, 205c, 60c, 50mm. My first print was perfect. Love the color it is rich and shiny like polished copper. Easy to use, no problems with it at all. Will buy again, in fact I just purchased the silver. 5 stars. Highly recommended.

This has a beautiful copper color but it started clogging my printer nozzles after several good prints. About the last quarter of the roll, I had 3 nozzle clogs and failed prints in between the successful prints. This also feels somewhat brittle.

This stuff is beautiful. The finish is the best, in my opinion. Wound neatly. Not too expensive, but worth the cost. Not brittle. Fits like it should and is the size indicated. HIGHLY recommend.

First off, I have purchased many spools of filament of various colors from this company. Overall, have been extremely pleased until recently. The last two or three spools have all had issues stemming from being wound in the factory. Multiple times throughout several prints, I found that the filament had been wound under a layer of filament somehow and completely bound up my machine requiring me to scrap the entire print including scrapping untold yards of material and all of the time it took to get to whatever point in the print the bind in the spool of filament happened). This typically leads me to also having to completely recalibrate the machine among other things. It's incredibly frustrating. Still, I do recommend this product, but with the caveat of knowing that it seems quality control at the factory seems to be slipping. BE WARY and watch your printer VERY closely to make sure the spool is not binding and screwing up your print and knocking your printer out of whack.

I have a Tevo Tornado printer and it has a hard time getting QUALITY aesthetic features on some prints. This stuff prints GREAT for me at 195*C hot end and 65*C bed. Using Splic3r I had par or lightly above par results tweaking the specs on this filament. But switching to Cura and using its finer detail settings just blew me away! This stuff prints GREAT! High accuracy, high detail, high metallic luster, keeps "wisping" or stringy cobwebs to a minimum. It looks and feels excellent, and for $20 per 1kg is reasonably priced. The Silk Copper color was an excellent look for hammered copper or bronze with patina. I rarely write reviews but this stuff is worth it, would recommend

Awesome filament, I'm using it on a BambuLab P1S. The quality is good, the color is great too.

HO TROVATO IL FILAMENTO MOLTO BUONO RISPETTO AL PREZZO, OTTIMA RESISTENZA E UNA RESA CROMATICA MOLTO BELLA, TUTTO A PATTO CHE IL FILO SIA TRATTATO CON I DOVUTI ACCORGIMENTI( FILO ASCIUTTO E TEMPERATURE CONSIGLIATE DALLA CASA) BUONA ANCHE LA RESA PER LA STAMPA VELOCE( STAMPO SU FLSIN SR).

Great product at a great price, just ordered 4th roll and also ordered 2 rolls of silk gold version to try. If you use Bambu printer keep temperature at 225 minimum or lower the printing speed for the best print quality and outer wall printing speed 50-70 if you want more shiny look.

Very nice and easy to print.

Excellente qualité