YMOO 2.4GHz Wireless Audio Transmitter Receiver (1 TX+2 RX) for Home Audio | 320ft Long Range 20ms-Ultra Low Latency RCA Jack Wireless Adapter from TV/PC to Active Subwoofer/Powered Speaker/Stereo

Setup was easy. I bought 2 of these kits to spread around the house for a party. They all talked to each other without issue. The rooms were spread out enough I did not hear lag and didn't notice any quality issues amongst the typical party noise level.

I now actually own 3 sets and use them to bridge large areas. I'll send the signal to one speaker as receiver input and use the output of the speaker as transmitter to further continue the signal. So far, it's worked amazing, with the exception of a very large (10,000 sqft) warehouse style business expo. I really struggled there (I only owned 2 at the time and there were way too many devices in the building).In this video example, I am outside on a main terrace and xlr hard wired my first 2 speakers (I ran mono with my left as the main speaker). I sent sound to 2 speakers in a room across the terrace with one wireless set from the output of my left main speaker using a splitter (to my right speaker and to the transmitter) and used a second wireless set to send sound into a separate room to the right of that same terrace where I placed 1 speaker, from the output of my right speaker. That room had a large glass window overlooking a rear terrace so the second receiver gave sound to a speaker in that rear terrace (I used a long xlr cable to allow the receiver to be at the window sill for best reception). The output from the speaker in the rear terrace now served as the bridge by using the transmitter of my third wireless set to send sound to a final wrap around terrace at the far rear of the building. It was flawless and compliments were received. I used a total of 9 speakers for that event in which 5 were wireless and 4 were hardwired xlr.

They technically worked but not well enough to fit our needs.

I am using these to connect my 2 rear surround sound speakers. I have a 2-story house and it would be a lot of time and effort to try and run wires through the wall. They work decently for being wireless. I do notice some latency occasionally, but it is not too often. I looked for a blue tooth solution to my problem but could not find one to support my existing TV, amp and speaker configuration. I have the receivers about 15 feet away from the transmitter and the sound is clear unless it gets extremely loud and then there is a tiny bit of static. I have one receiver for each rear speaker and setting up was easy. I would recommend these to a friend.

Connected this to non-powered speakers, the speakers receive sound but it is very scratchy and not acceptable. After reading through the manual I assume this is for powered speakers only, the product does not specify in the description or in the manual explicitly.

Purchased this to wirelessly transmit out from my Sony home theater “Zone 2” RCA jacks. At 2.4Ghz signal and sound are very clear. There is a tiny bit of signal delay. You really have to listen for it. Other than that it’s not really noticeable. I tested both receivers simultaneously around my property. I went as far as could. About 200ft out to where my pool equipment is and 150ft to the furthest bedroom in my home with excellent results. I could easily broadcast out to my garage and driveway if needed. For my use, #1 receiver is hooked up to a HiFi mini amp and speakers about 30ft away in another room. #2 receiver is hooked up to my outdoor pool stereo receiver about 40ft away and outside my home. Both work great and I can’t hear any music lag at such distances. I can pretty much play music on my main receiver and broadcast it throughout my home.

I was looking an audio transmitter to let two devices to work at the same time, one is a Bose Sounddock and the other one is an old Sony Home Theater in a box. The whole idea was not to get delay between this two devices playing from the same source at the same time, and it worked perfect! There is no delay, the audio quality is awesome, no noises, no low volume, it is just perfect. The best part is that I just plug the power and audio wires and everything started to play on the spot.

For: YMOO 3 in 1 2.4Ghz Wireless Audio Transmitter and Receiver,2 Receivers for Two Speakers,20ms Ultra Low Latency,48kHz/24bit HiFi,320ft RangeWorks very well with zero-dropouts and no noticeable lag, but, be aware that it uses the 2.4GHz WiFi range, so if you have a lot of traffic on your WiFi router, and/or lots of devices which create interference on that band (such as microwave ovens etc), you may not always get desirable results. I bought a separate USB to RCA cable and I use it to send audio from my laptop to two separate stereo systems.I am happy with them, but, always aware of the above limitations

Le ho usate in varie occasioni anche su piani diversi, non ho mai sentito una minima interferenza e un audio veramente integro, come se le casse al mixer fossero collegati via cavo... Davvero un ottimo prodotto con questi trasmettitori Wi-Fi risolverete alla grande il problema di lunghi cavi, e dove farli passare.

Super produit, facile à installer et à utiliser. RAS

The first set I received had a faulty transmitter unit so neither receiver picked up any audio. Sent them back for exchange and the second set worked perfectly. I used them to make my powered PA system completely wireless. Transmitter sent out both Left and Right audio, receivers selected either left or right audio depending on the speaker position. Worked great minimal to no delay. Good long Distance coverage between transmitter and receiver. Would buy again

Excelente calidad de producto. Funcionamiento simple y sin fallas. La calidad del audio es muy buena. Si es de baja latencia.

Funktioniert Top, kaum Latenz und hohe Reichweite