LiNKFOR IR Extender with 1 Receiver and 4 Emitters IR Repeater Infrared Remote Control Kit Hidden IR System Compatible with Box Satellite TV Receiver DVD Player Blu-ray Player

Works very well

Arrived very quickly, I am using this to get around my big cat as he sits in the way of the PVR recorder, works perfectly and very easy to install, the infrared lights come out of the holes in the mounting pads and the receiver sensor pickup is through the top, very powerful and it is possible to control more than one unit per IR transmitter if its stuck with the holes facing at least 6 inches/150mm away from the units

I bought this IR receiver to control a device that was hidden behind a door on my TV unit and it works well unless the IR receiver is in sunlight and then the receiver does work properly. It works well otherwise so just be aware of where you position the IR receiver.

Bought for extending a Cambridge Audio amp control into another room, I was surprised how well It works! Thought there would be some incidents of things not syncing up from time to time but it just works 100% of the time no issues. Just stick the little pads on the front of your amp etc next to the built in IR receiver and you can position the extended IR receiver where ever you like.

it works well, except around about 2pm it has a problem picking up the signal, LOL, and I have to wave the control about until it picks it up. Weird I know, then it's fine again from about 5pm. To be able to have equipment in a cupboard is so tidy, it's great. Really good value for money and I would recommend

I bought this so I could operate my Humax box behind the doors of a wooden media cabinet. It was fairly easy to set up and get working on day 1. On day 2, it wouldn't operate with the emitter in the same place, but I was able to get it working by changing the position. On day 3, I couldn't get it to work in any position. So it's being returned, and I'm buying a more expensive one from a well-known brand, which hopefully will be more reliable.

The LiNKFOR IR Extender is easy to setup and use. The IR receiver has a small LED that illuminates with a soft glow, green when power is on, and flashes red as a remote control is transmitting. The cables are plenty long enough and excess can easily be tied back out of sight. The receiver and transmitters are secured using a double sided adhesive and stay in place. Power is supplied from a USB (type A) and the IR repeaters are connected with a 3.5mm plug and socket so it is easy to route cables before mounting everything. It works with all remotes I have with 36hHz and 38kHz carrier frequencies.

Works very well when it is stuck to the device. But after a month it doesn't stick at all. Seeking warranty claim.

Funciona bem.

Ich habe explizit nach einem Infrarotempfänger gesucht, der mit einem Yamaha AV-Receiver kompatibel ist. Die von Yamaha empfohlenen Produkte waren entweder nicht verfügbar oder extrem teuer. Nach etwas suchen bin ich dann auf diesen IR-extender gestoßen. Ich wollte unbedingt einen Extender haben, den ich direkt an den Remote Eingang des AV-Receivers anschließen kann, ohne die IR Blaster nutzen zu müssen. Das geht bei diesem Produkt echt gut, statt der IR-LEDs habe ich ein Mono-Klinkenkabel angeschlossen und mit dem AVR verbunden. Den USB Anschluss für die Stromversorgung habe ich dann an den Fernseher angeschlossen. Auf Anhieb hat alles perfekt funktioniert und reagiert sofort auf jegliche Eingaben. Ich habe zu Testzwecken auch mal die mitgelieferten IR-LEDs angeschlossen und getestet, was ebenfalls problemlos funktioniert. Werde aber weiterhin das Klinkenkabel verwenden, weil ich dadurch nichts in mein Lowboard kleben muss. Alles top und klare Empfehlung.

Cela fait longtemps que c'est installé (des années) et cela marche toujours très bien. C'est très simple à installer.

Permet de garder les décodeurs et DVD dans l'armoire. Prix très raisonnable.

fa quello che deve fare