LET'S RESIN UV Resin Kit with Light, Bonding&Curing in Seconds, 30g

I have been struggling with various different brands of one to one and 2 to one mixed and they rarely go smooth in the drying and hardening process, plus I have to wait a day or more for results and by then I have wasted a day for not so good results usually! So I decided to try the UV light curing kit!. Got a small amount to see how it did before going all out, I have to admit I was skeptical. Tried a bit in a silicone mold I made for some jewelry I was planning on making for someone. I was trying to make a reverse mold so I could use it for the final mold. To my joy I waved that UV pen for a few minutes over the resin and cautiously touched the surface thinking it would be at least sticky! WOW! It had hardened solid at this was a 1/4" deep mold or more! Solid and dry! My mistake was I got impatient and squeezed the mold a bit before it was done curing and I got a bunch of air bubbles form under eath the resin, separating it from the mold a bit! My fault. Won't make that mistake again! I was fully pleased with everything, especially cause the sent everything I needed in one neat, easy to use kit! For all beginners I highly recommend this kit! Reasonable price and just enough to try a test out and get familiar with it. Just be patient while shinning the UV light on the resin! Good luck to all you creative and energetic crafts people and artists!

Exactly as advertised and gets the job done is seconds. I used for a project that I preferred raised lettering. It was quick and easy and I had 60 cards to do. The resin quality is above average and the output of bonding is consistent and easy to control any leakage. After completing the drying process there is no discoloration.

This kit works exactly as advertised. The UV light cures the resin in seconds, making quick repairs and small craft projects super easy. The bond is solid and clear. Highly recommended!

I used to have a junk phone case business which is what I used this glue for. works great and gets the job done for sure, but i do advise you don’t leave this glue anywhere super hot or super cold which was my mistake at one point lol. Also, wear gloves. this glue is very messy and sticky. The drying time is great, doesn’t take long at all. I haven’t noticed any leakage which is good for when i store it away. completely clear, no additional coloring. Glue is very, very durable on my phone cases! some examples below

This stuff works amazing and has a great consistency as it’s not too thick and doesn’t look too tacky either. It holds up quite nice so I would say it’s very durable and it’s a great value for the money! I will definitely be purchasing this again when I need some

I love this glue the dry time is so short you just hit it with the UV light for maybe 5 seconds depending on how much you used and you're good to go. It's also very strong and doesn't have that strong super glue odor a lot of glues have.

Got this as a trial size 30 gram bottle . I hate that it takes longer to get the tacky feel completely cured! I would try the sun for help but it’s in the middle of the night when I’m finally getting to try this out on a project. I would recommend for small projects pieces but definitely get the bigger uv lamp for medium to larger sized projects. For reference I’m making something the size of a lighter.

I’ve just been puttering around my house looking for things to fix. I love that you can spend as much time getting the pieces lined up as you want before you hit it with the UV and harden the resin. So much nicer than superglue or epoxy in that respect.I don’t think it bonds as well as superglue or epoxy. I’ve already had to go back and re-repair a little decorative piece on a soap dispenser that I reattached with this stuff. It’s brittle and if the UV can’t hit it, it won’t harden, so flat, opaque surfaces are going to be a challenge- but if that’s what you’re working with, just use superglue. This stuff excels at tiny, fiddly fixes like ornamental pieces and toys.It is a little pricey. The cure time is longer than I expected- maybe the included UV light is just weak but I was holding it for 30 seconds, not 5. I haven’t had to clean up any spills but I suspect that could be a problem- not as bad as CA glue of course.All in all I’m very happy to have this in my toolkit.

Solo funciona si las dos partes a pegar pueden espar expuestas a la luz.

The LET’S RESIN UV Resin Kit with Torch is one of those products that makes you wonder why you spent so many years waiting impatiently for ordinary glue to dry while holding tiny parts together like a stressed-out octopus.For hobby work, miniature builds, book nooks and general crafting, this kit is incredibly useful. The resin itself is easy to apply and the included UV torch cures it remarkably quickly, often within seconds, which feels dangerously close to witchcraft the first time you use it. Instead of balancing parts in awkward positions while glue slowly sets, you can simply position the piece, hit it with the UV light and move on with your life.The kit works particularly well for securing LEDs, tiny decorative parts, clear plastics and awkward little pieces that would normally test both patience and vocabulary. Because the resin remains workable until exposed to the UV torch, you get plenty of time to position things properly without the panic associated with fast-setting adhesives.One thing I really liked was the precision. The resin can be applied neatly in small amounts, helping avoid the usual glue disasters where an innocent craft project suddenly looks as though it survived a chemical spill. Once cured, the bond feels strong and durable while remaining clean and tidy in appearance.The UV torch itself is compact, easy to use and surprisingly effective. There is also a deeply satisfying feeling that comes from instantly hardening glue with what is essentially a tiny sci-fi gadget from the future.As with any resin product, good ventilation and sensible handling are important, but used properly this kit is an absolute game changer for many hobby applications.Overall, this is an excellent little resin kit for crafters, modellers and book nook builders. Fast, precise and genuinely enjoyable to use, it quickly becomes one of those tools you wonder how you ever managed without.

La volveria a comprar sin pensar es super r resistente, muy bueno para fijar cualquier tipo de joyería, impresión 3D cualquier cosa que necesites pegar es muy útil ya casi me la estoy terminando y estoy por comprar otro. La marca es calidad

Ca fonctionne bien

Wow, das Zeug ist echt klasse. Endlich mal eine vernünftige Lampe dabei und nach 5 sec echt total ausgehärtet. Hab es mir gekauft weil ich meine Kunststoffsonnenbrille nach Bruck kleben wollte und Uhu Endfest hat keine Bindung zum Material aufgebaut. Seit 3 Wochen kann ich sie wieder nutzen und sie ist stabil wie eh und je. Klare Empfehlung! Achtung, nur da geeignet, wo das UV Licht auch hinkommt, also nicht in engen Bruchstellen, außer man fräst diese auf.