ES960 CPAP Battery, 96000mAh 297.6Wh CPAP Power Station, CPAP Battery Pack, 12V 24V CPAP Power Supply for ResMed AirSense 11/ AirSense 10/ S9/ AirMini/Aircurve 10/ Philips DreamStation

This CPAP was ordered to power 2 of us off grid with Philips Dreamstation. The battery pack did both for 2 nights plus our phones and led lights. So this pack can power one dreamstation for at least 4 nights. Unfortunately, the solar panel wasnt available so Wang kindly recommended a suitable one online. I don't want to name it because we haven't had enough time to test it fully but it seems ok. I'd rather have had an easylonger, but maybe next time. We didn't hesitate in buying the second unit and they have been absolutely brilliant this summer. I highly recommend this for CPAPs. It comes with all the necessary power leads and is very useful because it outputs at several different voltages to suit your specific machine. The supplier will recommend a different lead if your cpap isnt in the list of supplied leads. The unit has many outputs and a couple of very useful torchlight too. It takes a few hours to recharge and it is recommended that you put the charger on a safe surface because it does get hot. We went on to buy the bespoke carry cases and they are excellent value, well made with useful pockets. They keep the batteries safe and easy to transport. The value for these items is also excellent compared to the others recommended by hope2sleep. Edit I have failed to get contact on a couple of questions post purchase but all in all, these units are a good purchase.

This battery is impressive. It powers my cpap for 8 days on one charge. Very robustly built in a strong case. Perfect for using with my campervan to save the van batteries.

I’ve been using the EASYLONGER ES960 CPAP Battery for a few weeks now, and it has exceeded my expectations in every way. As someone who relies on a CPAP machine every night, having a reliable, portable power solution is critical, and this product delivers. Here’s an in-depth look at my experience with it: Battery Performance The 96000mAh (297.6Wh) capacity of this battery is outstanding. It powers my ResMed AirSense 10 with ease for up to 2-3 nights, even with the humidifier and heated tubing enabled. If you turn off those features, it can extend to 4+ nights, making it perfect for travel, camping, or power outages. I also tested it with my ResMed AirMini and found the performance equally reliable. Its dual 12V/24V outputs ensure compatibility with most CPAP devices, including Philips DreamStation and AirCurve 10, providing peace of mind for users of various machines. Design and Build Quality The battery is well-designed, with a sleek, sturdy exterior that feels durable yet compact enough for portability. It comes with a handy carrying case, making it easy to transport. Despite its high capacity, it remains relatively lightweight, which is a big plus for anyone on the move. The intuitive LCD display is a standout feature, showing real-time battery percentage, voltage, and output status. This makes it easy to monitor power levels and adjust usage accordingly. Ease of Use Setting up and using the ES960 is incredibly straightforward. The package includes all the necessary adapters and connectors for most CPAP machines, so I didn’t need to purchase any additional accessories. The instructions are clear and detailed, and I was able to get everything running within minutes. Switching between 12V and 24V modes is simple, ensuring seamless operation with different devices. Charging and Versatility The ES960 supports multiple charging methods, including wall outlets, car chargers, and solar panels, which makes it versatile for different situations. Charging times are reasonable given its capacity, and once charged, the battery retains its charge for an impressive amount of time. This is especially useful for extended trips where access to power is limited. Customer Service One of the standout aspects of this purchase was EASYLONGER’s customer service. Before buying, I had questions about compatibility with my specific CPAP machine, and their team was quick to respond with detailed, helpful answers.Their proactive and friendly approach gave me confidence in the product and the company. Use Cases 1. Travel: The compact design and long-lasting battery make it ideal for vacations, flights, or road trips. 2. Camping: It provides reliable power even in remote locations without access to electricity. 3. Power Outages: This battery is a lifesaver during storms or outages, ensuring uninterrupted CPAP therapy. Pros • High capacity (96000mAh) for extended use. • Compatible with a wide range of CPAP machines (ResMed, Philips, etc.). • Compact, portable, and lightweight design. • Multiple charging options (AC, car, solar). • Intuitive LCD display for real-time monitoring. • Quiet operation with no noticeable noise during use. • Exceptional customer service. Cons • The charging time could be shorter, but this is understandable given the large capacity. • It’s an investment, but the performance and reliability justify the cost. The EASYLONGER ES960 CPAP Battery is a premium product that offers excellent performance, reliability, and versatility. Whether you’re traveling, camping, or preparing for emergencies, this battery is a must-have for CPAP users. Combined with top-notch customer service, it’s a purchase I highly recommend.

Fantastic product works really well and great for everything else as well as CPAP. Great value for money. The customer service is fantastic and very knowledgeable and happy to help! Only downside is the battery level indicator but it is easy to gauge one you have used it a few times. Or just plug it into power to reset the battery indicator window. Small in size considering the amount of energy it holds. Thumbs up from me :)

It is an heavy piece of kit. It has his flaws but if you understand how the device works it is brilliant. The main reason I bought it is to power my Resmaid airsense 10 at night when at home and want to use it as a cheap UPS. I have a lot of power cut especially during storms. The device allows pass through but you need to understand how it works. More on that later. I also want to use this device when I’m away and have no access to the main electricity to power my airsense 10. Obviously while away no humidifier and heated tube to minimise power consumption. I will have to find a way to recharge the power bank somehow while away but I haven’t tested that yet. The provided charger adaptor is rated at 40Watts. I disregarded it as my plan was to charge it through the PD port at 60 watts. At 60 watts is more than enough for the airsense 10. As I have an Apple MacBook Pro charger that can provide 60 watts I was fine. I bought a 100 watts USB-C to USB-C cable (with display so can see the power drained from the charger). The device comes with the DC-DC cable for the resmaid 10. You select 24V ourput and the airsense turns on. This works fine. As mentioned above I charge the power bank using the PD port. When charging you can charge the device at 60 watts. Something to be aware is when the power bank is full with no drain the power bank stops charging which is fine. But if you start draining power from the device while the PD cable is still connected, the device won’t charge automatically. This is a drawback. Unless you start you cpap and unplugged manually the PD cable and reconnect it the charge won’t start. If you do it then the pass through will work and even if the battery is fully charged while passing through it will carrying on passing through until you stop the cpap machine. As I didn’t want to do this each night I got myself a digital timer plug socket. As I never go to bed at the same time each night I have programmed the timer in that way to make sure it will always work: At 22:00 power on - if the battery not full for whatever reason it will charge. If full the power bank won’t charge. At 23:00 power off. At 23:01 power back on. At 00:00 power off. At 00:01 power back on. Repeated that pattern up to 3am. Then at 7:30 power off. This is to make sure no power is sent to the power bank during the day. This helps maintaining the internal batteries. Programmed that way I can start my cpap at any time without worrying about pass through. Worse case scenario the cpap will run on battery for 1 hour until the pass through starts. So far it worked very well. In fact every morning the power bank was full and on the charging cable display I could see the power used was only for the cpap needs. I have tested the power failure scenario (power cut and power back again) and it works perfectly. At home I use the airsense 10 with the humidifier and heated tube with that setup and it works fine. Some cons: The battery gauge display is not accurate at all. Don’t rely on it. The PD port is for in and out. I have a charger with multiple PD ports and if I use it to charge this device when the timer was off (no electricity) then the PD port on the device switch to output mode. When the timer was on the PD port couldn’t switch to input. It was still switching between in and out. Something to be aware off. Better to use a charger with one PD port in my opinion. Something you need to test. The instruction manual is not very clear in some places and the print is very small. The device has got some drawbacks but I have managed to make it work the way I wanted to use it for. The extra was around £20 in total. Only time will tell me if it last. I took 1 star off because of the PD port not charging automatically if fully charged and a draw starts and the battery level indicator to be unreliable. I know it is a long review but I hope it will help some if they want to achieve the same as me.

I bought this to enable me to go camping 🏕 with my CPAP. sleep apnoea can be such an inconvenience to those who love camping. Stuck with needing to sleep within a few meters of an outlet. Or lugging a long extension cord everytime you are away from home. This battery pack I get 3-4 nights (7 hours/night) using my remed air sense 10 with humidifier res set at 6. That last part a bit specific but hope it helps someone as it was hard when I started looking to decide which battery system to get. Non CPAP uses I have used it for. Recharge my laptop 10-12 times. Run a class led projector for 6 hours while teach an outdoor first aid course, the wireless charger is great for my phone, the variable voltage is helpful, simple to use and has a good LED torch built in. The weight is a bit much but I don't hike much with it so fine to lug to a campsite or hike up to a base camp with. Not allowed on airplanes is the only negative point I can think of.

Used mainly for a CPAP machine especially during power cuts, however, it's a very versatile power pack - it will charge phones, laptop etc.

Excellent well impressed

He probado la batería recién comprada y cargada con mi máquina del sueño Resmed Aisense 10, la tengo puesta con el depósito de agua y la batería ha durado 20 horas justas. Lo cual para levarla en mi furgo camper es ideal. Sabiendo que tengo para tres dias como mucho, tendré que mirar cómo recargarla si con placas o a la electricidad si en ese momento lo tengo. Por lo que he leído de otros que han comprado la batería, dura más sin el depósito de agua. Por lo demás es una batería que aunque pesa, rinde bien y está muy bien fabricada, los materiales son buenos y resistentes.

An sich ein sehr guter Akku, besonders die Lichtfunktion. Benutze ein AirSense 10 mit Heizschlauch und Befeuchter und kann nicht drauf verzichten. Beim ersten Probelauf war der Akku nach 6 Stunden leer. Daraufhin erhielt ich einen Tauschakku, der dann tatsächlich sogar knapp sieben Stunden durchhielt. Das geht zur Not auch mal, wenn kein Strom da ist. Ich empfehle auf jeden Fall, es vorher auszuprobieren und auch zu berücksichtigen, dass der Druckabfall beim Ausfall des CPAP-Geräts abrupt erfolgt, nicht wie beim Ausschalten. Die Akkuwarnung erfolgt nur durch ein Blinken, es gibt kein akustisches Signal. Der Händler zeigte sich kulant und engagiert, mir zu helfen. Deshalb gibt es 5 Sterne von mir.

Machine exceptionnelle, la plus puissante a l'heure actuelle pour les appareils d'apnée du sommeil et pas seulement, on peut charger plein d'autres systèmes avec. Mon expérience, j'ai une Resmed Airsense 11 utilisé sans humidificateur, j'ai dormi 6 nuits d'affiler complète, moyenne d'utilisation 7h25 par nuit. Petite astuce, au réveil il ne faut pas oublier de l'éteindre ensuite débrancher de la batterie car les fonctionnalités Wi-Fi et autres consomme de l'énergie. Je recommande chaudement cette batterie avec un excellent rapport qualité prix.

perfetto e comodo

Before my first camping trip, I conducted a home test of my new ES960 battery connected to a Löwenstein Prisma Smart CPAP machine. I set the humidifier to level 2 and used a dynamic pressure range of 4 to 12 cm H₂O. With the battery fully charged, it lasted three nights, each comprised of approximately six hours of sleep. By the end, the display still showed one remaining bar—but I couldn’t tell whether that meant a 25% or a mere 1% capacity remaining. Overall, the battery exceeded my expectations; I am highly satisfied with both its actual performance and build quality. I would appreciate it if the battery’s display showed numeric battery capacity instead of bars (currently, there are 4 bars, each representing a 25% increment), as the exact remaining capacity remains unclear. Additionally, it would be beneficial if the battery could automatically detect and set the correct operating voltage for the connected device. Currently, after turning it on, I must manually select among 12 V, 16.5 V, 20 V, or 24 V—which I find inconvenient. Finally, I must commend the customer support, who responded promptly to all my questions and provided helpful guidance. I can confidently recommend this battery!