RPi GPIO Breakout Expansion Board + Ribbon Cable for Raspberry Pi 3 2

Good quality and really helps to use modules and testing.

Great quality and easy to use thanks to the labels next to the pins.

There are a bunch of similar products to this on the market, but this one seems to be about the cheapest -- I paid seven quid for two. I've used more expensive units and, frankly, this one is no worse. The sad fact is that everything for the Raspberry Pi seems to be made to low standards, so it hardly seems worth spending a lot of money -- you don't necessarily get anything better. It's a design flaw in the Pi itself, not in this unit or others like it, that the GPIO header pins will allow a header cable to be plugged in the wrong way around. The socket on this expansion board does not have this problem -- the ribbon header will only fit one way round -- but that's no consolation if you connect it incorrectly at the Pi end. It's worth looking at a pin-out diagram of the Pi (easily found with a web search) if you're not familiar with the connection. There is one little oddity (if that's the right word). The expansion board internally connects pins that are internally connected in the Pi. So, for example, there are many ground (GND) pins on the Pi GPIO header, all of which are connected together on the Pi main board. The corresponding pins on this expansion board don't just wire to the Pi, they wire to one another as well, just as they do on the Pi. The same applies to, for example, the two 5V pins. Broadly, this is a good thing, but it caught me unawares when I was wiring up a prototype on stripboard -- I didn't expect pins to be connected together even when the board wasn't connected to the Pi. Not a big deal, but it took me half an hour to work out why I was getting unexpected continuity readings when I was checking my wiring. i've only used of the two units in the pack so far, but it's been fine. It lined up properly on stripboard, and everything was connected that was supposed to be connected All in all, great value for money.

Nice product.

Great. Does exactly the same job as the more expensive brands.

Does the job

product as required

Excellent add on for raspberry pi users. Makes building prototype circuits much easier and neater. No need to worry when you need to remove it. Could do with a better marker for pin 1 on the cable.

Ware wie beschrieben, Funktioniert Tatellos!

Pas de pb de livraison... C'est un très bon produit !! et la livraison est dans les cordes.

Molto peggio di quelli che avevo nel kit di componenti acquistato precedentemente. Questo è molto largo, sulla breadboard lascia poco spazio per le connessioni. Non mi piace per niente come è stato progettato. Ordinato per emergenza perchè costava poco, ma credo che ne comprerò altri più in linea con le mie esigenze

the ribbon cable head has some clearance issues if you have a hat or something screwed into the pi but otherwise nice

Pożyteczny przy prototypach projektów na malince.