SABRENT Internal Card Reader, 7-in-1 Internal USB Card Reader, Flash Memory Card Reader Writer, With power cord (CRW-UINB)

I like the fact that this is an SD card reader without any of the bells and whistles that other products have. All I wanted was a reader that takes micro SD cards without having to scratch around for an adapter. It has two LED lights; blue to indicate power and white which is labelled 'Access' that lights up whenever an SD card is present. Installation was easy, just a connector to attach to the USB 2 header on the motherboard. As I didn't have a 3.5" external drive bay in my case, I got an adapter to convert a 5.25" one. The blue power LED is rather bright. If I get fed up with it, a bit of black insulation tape will cover it easily. No big deal. So overall, I'm very pleased with this product, it does exactly what I want for a reasonable price.

Pros...It works. It's usually a decent price It looks good (even with the tiny writing) Cons...It has the brightest LED power light I have ever seen! It does not like the Antec VSK3000B-U3/U2 case I put it in, the screws holes don't line up (the case's fault more likely)

Excellent internal card reader! Even though by todays standards USB 2.0 is slower than what some people are used to. The convenience, functionality and the large amount of different card slots available on this reader was perfect for my needs. Excellent value for money and a nice design too!

As others have said the blue light is maybe a little on the 'police - pull over' end of brightness but a dab of tape will see to that (the brightness, not the police). It fitted easily into my unused floppy disk bay, retained by the screws provided. I pulled the cable of my existing front panel USB ports and attached this in their place. Everything works - two kinds of card I use - XD and SD - I tried a USB stick in that port. Speeds are good, what you'd expect from USB2. Not related to this excellent product but now I need to suppress the message on start up telling me my USB ports are missing! I am using an old HP XW6200 PC running Linux Mint 21, no drivers were needed to use this device.

The unit arrived and was an easy install. In the instructions it indicates that it must be connected to a 9 pin USB header. The problem is that only 8 pins have a wire attached but the socket does indeed connect to the 9 pin header. On firing up the PC the first thing you notice is the blue power light on the facia which doubles up as an aircraft landing light, it's that stupidly bright. The next thing I did was to insert a USB drive into the units usb socket, nothing, inserted a micro SD and all it wanted to do was format the card. Clicked on format disk and that also failed. I know exactly what files are on both storage devices and plugging into previously available input ports verified that the files were indeed there and readable.. Device manager confirmed there were no hardware conflicts. The unit was visible but unable to perform any read or write function. So after about an hour of research and implementation of the suggested solutions I concluded that the unit was defective and began a return. I ordered an alternative which arrived today. A very similar unit but the 9 pin USB plug has 9 wires, so one wire to each of the nine pins. It worked as soon as I powered up the PC and no annoying blue landing light. It immediately read the relevant storage device displaying the contents of each on the screen. This unit may work on some systems but certainly not on mine which is running on Windows 11. I therefore am unable to recommend this particular device as I failed to get it to work correctly.

Just installed and briefly tested (SD/MicroSD only) and it seems to be working. It has that very annoying bright blue LED and a nicer white one when accessing memory. I covered the blue LED in tape and that's slightly better. A few words of caution most of the reviews here are for a different (much better) version, that version had white and black face plates and was USB3.0. This version comes with only a black faceplate and not 5.25" mount. It is also USB2.0 and uses an internal motherboard USB2.0 header (probably labeled FRONT or FUSB). Logevity is the major concern with these devices and I can't comment having only just installed it.

Perfect little card reader. Slots easily into any 3.5" bay and has a long enough cable to reach the internal USB header on the System Board (even in my full size tower PC). Driver installation was automatic as it was recognised by my Windows 7 OS. If you need an internal card reader, you cant go wrong with this one. Great price and just works out of the box.

...3.5" front dash card reader. Bought to replace an existing 3.5" reader as part of an upgrade for my aged Advance mATX case. A rare beast in its form factor as it stands only 250mm high. Only the newer HTPC case come close but they are a lot wider than the 290mm of this case. I'd already fitted a Tccmebius TCC-QL5E 5.25 Inch PC Multifunction Dashboard Media Front Panel, With SATA e-SATA Dual USB 3.0 6 port USB 2.0 Audio Ports and Five-in-one Card Reader (SD/MMC/CF/MS/TF / M2) and felt that you can never have enough connections. for external devices. Fitting is a breeze just one USB connectio to the USB header of internal distribution block fit the locking screws and replace the case. Done. Boot up and the unit is transparently present Modern tech has come on leaps and bounds and the explosion of Chinese generic has given the end user a vast array of well priced options. However the 3.5" range is somewhat limited to either a internal USB outlet panels with a couple of USB2 or USB3 connectors or these smaller 3.5 versions of the 5.25 standard front dashboards. A slightly specialist item but worth the very modest outlay. The other reason I bought this one the other 1.75" is taken up with the display of the internal/cpu thermometer which is part of the case...not something that is fitted to anything now...older cases have their advantages. Buy this reader if you have a spare bay and want more flexibility.

La carte compactflach et les connecteur usb sont monté inversé de 180°, ce qui oblige de retourner la carte pour le branchement. voit photo. la lumière de la led bleu est gênante car trop forte à mon goût. LA qualité de l'assemblage laisse à désirer. Par exemple la led blanche est trop enfoncée. Je ne recommande pas cet article. Et je rajoute: après 8 mois d'utilisation, il y a des pins qui se sont pliées sur l'emplacement de la compact flach, cela provient d'un décalage de la carte électronique vis à vis des ouvertures de la face avant. J'ai réussi à les redresser, il fonctionne à nouveau. Non je n'achèterais plus jamais ce produit.

Installed this in an old Dell Vostro. Works perfect, no setup needed.

E' un ottimo ed efficiente lettore di memorie su bus USB 2.0 interno. E' assurdo che alcuni recensiscano male questo prodotto asserendo che non è USB 3.0. Esiste la versione 3.0 ma se una persona ha il bus 2.0 sulla propria MB è ovvio che deve prendere questo. Le schede entrano bene, avrei solo preferito più profondità di inserimento per la Compact Flash ma sembra che non esista un lettore che la abbia.. I driver sono universali anche su Windows XP. La velocità è la massima supportata dal bus. Il cavo interno è sufficientemente lungo per qualsiasi case e ben schermato. Il prodotto è solido ed ha una mascherina stabile. Un led semplicemente comunica che arriva l'alimentazione, quindi è sempre acceso quando il PC è acceso. L'altro segnala il corretto inserimento e riconoscimento di una memori card. Il tutto ha un senso. Come per qualsiasi altro lettore vengono preventivamente attribuite delle lettere di unità che rimangono tali anche quando non ci sono schede inserite. Questo è assolutamente normale ed è un comportamento standard. Prodotto consigliato.

acheté pour lire une carte SD.malheureusement HS.

Ürünün CF kart okuyucusu dahil olarak genel niteliği amatör amaçlarla kabul edilebilir düzeyde... Herhangi bariz bir kalitesizlik söz konusu değil.