CLIP top BLUMOTION Soft-Close Hinges, 110 degree, Self closing, Face Frame, with Mounting Plates (Inset - 4 pack)

I rarely (if ever) review products – but I had to comment on several of the less than stellar reviews. First off I use Blum hinges on all my projects and they are a very good quality, reliable hinges. 1. These hinges are for INSET doors – as it clearly states in the product description. 2. The instruction sheet is provided as part of the product description (it is the third image). 3. The hinges will indeed work with a 1-1/2” face frame – which is the minimum (they need ~1/2” from the inside of the cabinet to the edge of the face frame but the door hole needs to be drilled in the proper location and the hinges adjusted to achieve the required reveal (the adjustment screw is the one nearest to the door) I usually shoot for just under 1/16” reveal (i.e., 1.5mm). For this the center door hole should be drilled about 13/16” from the edge of the door (assuming a 1-3/8’ bore). The hinges are adjustable and can be adjusted down to a reveal of ~ 1/32’ using these dimensions. (note these dimensions are +/- fractional approximations of the instructions which are in mm). I’ll be the first to admit the instructions could be a bit clearer – but these hinges will do the trick

I love these hinges because they allow you to adjust them to a perfect fit in all three axes.(forward back, up down, side to side). Does require a properly sized forstner bit and careful drilling of the hole, but i did not find a store bought jig was necessary

Arrived on time as promised. Exactly what I needed at a very competitive price. Solid piece of hardware. I highly recommend this supplier, Custom Wood Creations, for cabinet hardware.

Installed on framed inset cabinet doors. Good quality. Work very well, soft close is nice. Used Kreg hinge jig. 24” tall x 22” wide raised panel door. Located hinge centers 3-1/2” from top and bottom, and edge of hinge cup 5mm from door edge (3/32” door reveal). When locating brackets on frame, distance to bracket center from top and bottom of door opening must include door reveal. Install hinges AFTER trimming door to fit opening. No installation instructions included but available on-line. All 8 hinge halves shipped in one plastic bag. Bag of only 13 screws included (16 screws are required!), but do not use these beveled head screws on the flat frame bracket (ok on the door side). Instead use flat flanged 3/4” screws (Kreg pocket joint or GRK cabinet screws).

Used these for a cabinet I built and they work great and were as described.

We used this hinges to finish installing our inset cabinet doors. They were super easy to install - I screwed in the door hinge and then for the cabinet hinge, I measured and used painters tape to tape them in the exact place. I reached through with the drill and drilled in the screws. And then I was able to just pop the door onto the cabinet side of the hinge. I also adjusted some of the hinges so the doors would sit right. 10/10 will buy these again when we do our mudroom and pantry

These are inset hinges. They probably won’t work with your typical cabinets that are probably overlay. That’s why they are frequently returned. It’s mentioned once in the barely there product description. It should be in the product title. And having the pictures show instructions for all the kinds of hinges including overlay and not just inset is misleading.

Although these are inset hinges, I originally ordered these and received what I was looking for. An inset hinge that I could adjust up/down, in/out, and left and right. After ordering the first time and finding what I needed, I ordered (6) sets, for all my cabinet doors on a customers entire house. The second time, (after going to recent purchased in my Amazon profile, and purchasing these again) I received a different hinge, one that did NOT adjust up/down, like what I previously received and had a wider gap from the side of my door, to the face frames where the housing was mounted, even when adjusted all the way to the face frame, as far as the hinge would allow me to move it. What I ended up finding was that the first time I received a half shank hinge with 3 different adjustment options, and the second time I received a full shank hinge with only 2 adjustment options. The housing that mounts to the backside of the face frames were the same with both different orders. 3 stars because it is misleading and/or there is no guarantee you’re going to get what as advertised.