Voswitch JL400 Grab Handle Switch Panel for Jeep Wrangler JL 2018-current and Gladiator 2020-current

Great product but u fortunately it’s not comparable with the 2024 model.

Easy to install. Works great

Honestly, like others have said, this should be factory. It is so much more convenient for a driver to reach up and turn on lights from the grab handle than down in the middle console behind the shifter. It did include everything I needed to complete the install and it looks fantastic. Instead of taking down the windshield, I was able to find the pop out between the firewall. I cut straight down the grommet, made a whole big enough for the cable with a drill and slid the cable in the center. I reinstalled the grommet and that was super simple. I then just fished the cable from below the dash and up to the pillar where the switch would connect.The wiring in the engine bay wasn't difficult. I didn't use the crimp on connectors that were provided though. I just stripped back a small amount of bare wire and connected to the terminals.I also did not connect the "key on" wire. I went ahead and just let it wired direct since I need to utilize my lights at times when I don't want the vehicle running. Since it has a power switch with the light switches, it is easy to just turn off and on. Also, since it lights up, that is another indicator that the system is on so I don't forget to turn off the power after use.Overall, a really great system for switches for lights and accessories. This is the way aftermarket switches should be.

What a fantastic piece! The switch location is perfect and easily accessible as compared to the stock location behind the shifter. It blends into the interior and looks factory. The installation took me about an hour (two hours including installing and wiring my new ditch lights). Easy to follow installation instructions with pictures. There two negatives I do have. One is the length of the lead that goes between the control box and the interior switch is very long. There are two ways to route the lead and I chose the shortest, so I understand why it's long. I guess I could have cut the wire and shortened it, but I didn't want to possibly cause myself any future issues. The excess wire is neatly hidden behind the interior grab handle. The other negative I have are the icons on the interior switch. There is a picture of a light bar, a pair of lights, Aux 1 and Aux 2. I wish there were a way to modify these as I am not running a light bar. That is really a personal issue, but when you look at other switch packs on the market, they have icons that can be changed to meet the needs of each individual user.

Shipping time was well past originally stated date. Apparently there’s some fine print when it’s being shipped from overseas and the prime date doesn’t actually mean that’s when you’re going to get it. So that was pretty lame. Was worth waiting (so far)When it finally showed up, it went in pretty easy. Fit and finishes, decent. switch mounts slightly loose in the grab handle but doesn’t rattle around or have fallen out or anything as of yet.Had to a bit of clean up a few sharp edges with a file on the steel bracket you mount under the hood. Other than that, I couldn’t find anything else that looked this factory for this price. See how it holds up on the back roads. Sure cleans up the electrical cable routing aspect of things when setting up multiple lights.