XXGO 3 Pcs 3-1/8 Inch 80mm Triangular Sanding Pads

Great replacement item for my Ridgid Brushless Multitool R86240. They came well packed in a box wrapped in plastic bag. The pads locked down tight even though it has a deeper recess than the original Ridgid pad. They even came with a small pack of sandpaper nice touch. While I mostly use 3-1/2” sandpaper they fit just as well to these pads. Can’t beat the price and seem to be well made I hope they hold up. Pleased with my purchase. Thank You

Surprisingly better than the OEM sanding heads. I use this tool a lot and the replacement pack of 3 was what I needed. They came carefully boxed and even included a few sandpaper heads.

As good as original equipment

Will test of standing pads is the durability and how long they last. These did not last even when you use the same sellers sanding paper triangles. When you undertake to remove a used triangle, after a couple of prior removals, the Velcro on the pad just peels off with the used triangle. Apparently, the adhesive that is used to glue the Velcro to the remainder of the pad is really, really, inferior. All three sanding pads that were in this order did the same thing. WOULD NOT RECOMMEND.

They work but the company needs to use stronger glue.

Great price, good quality.

You need the universal pin adapter plate for the Sonicrafter which you probably already bought so you could use all brands of attachments on it. The original Sonicrafter uses an Allen wrench to change attachments, and the slot in this one is so you don’t have to take the bolt off, just loosen it, slide this on and wiggle it into place on the adapter which is easy. (Yes it took me a moment to figure that out. DOH!) I can’t speak to durability of the spot welds or foam yet, but the foam w the Velcro is nice and dense so it should remain flat during sanding. This is also taller than the original part but I don’t see that as a problem, it maybe an advantage. Last, a pro tip: use pieces cut from a heavy cotton sock on this attachment & some Novus #2 plastic polish to remove the haze on your headlights. Gotta be all cotton but it works great! If the haze is thick it’ll take a while to get it off the first time but after that it’s a 15 minute job for both sides when it starts to haze up again.

Absolute garbage. Each one lasted about 3 minutes before the rubber separated from the metal that attaches it to the multitool. You can see in the second photo the sandpaper is hardly used before this failed. 3 in package, all three failed.

Fácil de uso y práctico.

These backing plates always wear out quickly if the hooks get damaged and clogged with dust. These work well, and are affordable enough to replace as they become less effective

These were a perfect fit and the Velcro was great.

Doesn't seam to hold sanding pads

The only problem with this item is it doesn't have a solid base of velcro so it may not last as long as my Dewalt pad. It was good value though as the package contained three pads. Overall I am happy with the product as I have already used it and it holds the sanding pads well.