Elite 32" Base Cabinet

I bought this for my laundry area. This cabinet is very spacious and sturdy. I put it together myself and it was very easy. Directions: The directions have the pieces labeled, but the parts are not. You have to look at the picture and match the piece up. You also have to ensure you have the pieces in the right positions, so I used the hinge placement as a guide. Assembly: This was very easy to put together and the screws went in much easier that the other cabinet I bought with this. You need to really put muscles into screwing them in, and if you use a drill, do it very slowly and not all the way. These screws tend to strip easy. Doors: This is my pet peeve with this brand. The doors are hard to place to close properly. It stated I could drill new holes to get it placed correctly. For the money I spent, I do not want to have to play around and drill new holes to get the doors placed correctly. There is about a 1/2 inch gap between the doors, which I am leaving as I don't want to spent so much time to get it corrected. To me, the doors should be more aligned so you can place them more easily. Overall I do love this cabinet. It is very sturdy and spacious. It holds so much stuff. I put this together myself and it did take about and hour or so. I wish it had a back, but that was not a deal breaker for me.

Absolutely LOVE it ! Exactly what I have been searching for to replace an old metal stand in my kitchen. It went together perfectly , the directions were very easy to follow . All of the pieces and hardware were there. I have an old Farmhouse style kitchen , and needed another cupboard/counter space . It fits great and the drawer is big too , and great storage . I would definitely endorse getting this cupboard . I have been looking for Years , and am very satisfied with this purchase. I bought a Bookcase shelf ( from Amazon also) that fits great right on top of the cupboard , to use for snacks , etc ❤️❤️. And the drawer handle is perfect for my dish towel 😂🤣

Update: Prepac sent the parts for the replacement drawer handle, free of charge, just with slow shipping. Getting the parts was a breeze with their online form. New handle screws in properly. This is for the 16" base cabinet. First, the good: It's heavy, sturdy, and roomy. It's fairly solid feeling versus other similar particleboard products. Here are the issues I experienced with this product: * The one screw for the drawer handle wasn''t able to be completely tightened. When I tried to loosen it, part of the handle unscrewed with it. I can't get the screw to fully drive so the drawer handle is wobbly. These combination philips/flat head screws are easily stripped, so be careful. (I contacted the company for a replacement handle/screws and will edit my review with any updates) (See edit above) * You have to drill through the front cabinet door when you decide on which side you want to install the handle. That itself isn't a big deal, and in a way it's nice in theory because you don't have unsightly holes. However, with the regular 3/32" drill bit, you have to drill from the rear to the front, but due to painted/coated particleboard, the hole chips away on the outside so it looks messy where it meets the handle. For the price, I think they should include a cheap particleboard drill bit for this purpose. * The screws for the metal drawer mounts don't fit into the holes on the metal mount. Round screw, oval hole that's slightly too narrow. * The instructions: My complaint is minor with this, but like a lot of these types of products some lateral thinking is required for the instructions. Usually each piece has a sticker or mark for labeling, but in this pieces aren't labeled so you have to use a process of elimination to figure out which piece is required for each step. In one step, the instructions show square shelve pieces, but they're rectangular ones in person. Certain holes or widths between holes shown in the instructions don't line up with what you have in your hand. For example, the instructions show three evenly spaced holes for the drawer rails. But the rail has three holes that are varying widths. To conclude: Generally good, but a tiny bit of chipping on the door. If I didn't have these issues I'd give this a rating of 4.5 stars. This is kept in a back room so the unsightly things aren't a big deal, but for $125 I expect those details to be ironed out.

Great quality, very happy with the product. I'd give it 4.5 stars if I could for 2 reasons below, but I'm giving it 5 because the quality exceeded my expectations. I needed a place for the litter box and I wanted a countertop. Cons: - no back - holes for shelves don't go up high enough - mine arrived without instructions and we couldn't find them online, but we figured it out by finding instructions for an upper cabinet - couldn't have put it together by myself easily since the pieces are really heavy so I had assistance Pros: - excellent quality, maybe better than my kitchen cabinets - great price for what you get - large width compared to other similar products - good neutral colors - easy to assemble, especially considering I didn't have instructions!! - sturdy enough that cutting a hole in the side didn't compromise the structural integrity at all Used this to make a litter box cabinet. I got this for less money than a comparable cabinet at a hardware store which wasn't wide enough. The 32" provides enough room for a litter box and a litter mat. Barely any litter makes it out of this. Roomy enough for my 17 pound cat to get in and move around. He's a tall and long cat! I stapled cardboard from the packaging to the back to keep the litter in the cabinet. I also wish it had higher shelf holes and may drill my own so I can put the shelf up high for storing cat supplies. It's MDF and melamine so my mom cut it for me in a wood shop. I don't think I could have done that at home with just my jigsaw, plus she knows what she's doing and I don't! Anyway, really happy with this cabinet. I want to get the matching upper cabinet next!!

This product is near garbage. I understand what this is, veneered pressboard paint by number assembly. But still it is garbage. The pre drilled holes don't allow you to adjust the pieces so the surfaces meet flush. Directions are fine, but the pieces are not labeled, just the drawing. The top is the best part but mine is chipped on the corner while still in the box. The veneer is loose and falling off the face of the bottom shelf. The hinges run out of adjustment and there is still a gap between the doors. There is no back, which I knew, but the unit has no diagonal support and is quite flimsy. The middle shelf is weak and sags with 12 bottles is water on it. The screws on the sides strip out before they sink flush so the insert covers stick out and look stupid. You have to finish drilling the holes in the door for the handles. They show a backer block in the instructions, mine didn't come with one. Overall this thing will work, but it is junk. Buy something else. I have several other similarly assembled cabinets of other brands. This is by far the crappiest.

Took my husband a few hours to put together (he takes lots of breaks lol), but WOW did it spiff up my laundry room!! It looks great, is very sturdy (and HEAVY)- and my only complaint is it came with no backing. The manufacturer really should include a back cuz these things usually don’t slide in flush to the wall because of floor moulding. Thankfully, my husband had some 1/8 inch boarding that he cut to fit and covered the back with. I still gave it 5 stars because I’m so very pleased with it - and the storage room is cavernous:) Btw for the icing on the cake- I placed a 31 1/2 inch tall 3 cube bookshelf sideways on the top which makes 3 perfect cubbies for my ironing needs, rags, etc.

Instructions recommend a 2-person assembly, but I was able to easily do it by myself. I am a 65-year old woman. The issue I have and the reason for a 3-star rating is because the required tools listed, see photos, did not specify that I would need a scrap piece of wood, a C-clamp, a 3/16” drill bit and a drill! This is required for step 7!! I do show a photo of the cabinet completed up to this point with the shelf from step 9. I like the cabinet but was not prepared for the added tools needed to complete as purchased. I am disappointed with that because now I have to make a trip to the hardware store for a few items.

This is a great cabinet! It came packaged really well to prevent any damage. It is high quality and the instructions were clear making the set up much easier. This is a great cabinet for storage and drawer space and matched everything in my kitchen really nicely. I'm thinking of gettinga nother one that is a different size. You will be very happy witih this cabinet.