Question 1

How does this compare to the radial mix blender?

Accepted Answer

Works the same way, but only one Output, and has an FX Loop. The BLEND knob controls the Level of signal from the FX in the FX Loop that's mixed with the DRY Input signals.

Question 2

Is this a buffered or passive switch?  Thanks

Accepted Answer

Hi, the unit is “True Bypass” and passive, so it will work without a battery (Although a 9v battery is required for the LED to function)

Good Question!

Question 3

will this allow a TRS stereo input cable with tip going to one channel and ring going to the other channel, then mix them with the Y function?

Accepted Answer

To be honest, I'm not sure. I don't see why not. I've never tried that before. That doesn't apply to what I'm using the pedal for... Each switch only turns that specific output on/off, neither switch switches between A or B. They're dedicated switches to that output as far as I know. Hope this helps!

Question 4

Hello ! what is the difference between the Morley Twin Mix and this Morley ABY, are both same....? I am confused because in the twin mix i see two outputs, A marked as the combine and B as the split. Whereas on Morley ABY it is only marked A and B on the outputs. I need a combined output , does the ABY have a combined…

Accepted Answer

The 2 big differences appear to be:1 - If you connect 2 inputs and 2 outputs to the Twin Mix, each input goes to it's respective (separate) output. They can be turned on and off with the pedal buttons, and volume adjusted, but their outputs are independent. The ABY does not do this, the channels are always available to both outputs. This looks like an ABY advantage, however...2-The Twin Mix has control of the inputs, where the ABY has control of the outputs. So let's say you have two instruments you want to play, one, then the other, then both, or maybe switch to a third. If you want to turn each instrument off while you are plugging in, moving the instrument, setting up, changing, etc...on the Twin Mix all you do is switch that input on or off, make the change, then switch back on. On the ABY....no way to do this. Both instrument inputs have to be going and you have to have alternative way of turning on and off the instrument as you plug in, out, setup, tune, etc.

Morley ABY Mixer/Combiner

Description

Common Questions