Thermal Grizzly Kryonaut - 5.55 Gram/1.5 ml - Extremly High Performance Thermal Paste - for Demanding Applications and Overclocking CPU/GPU/PS4/PS5/Xbox

I recently used Thermal Grizzly Kryonaut (1 Gram) for my CPU repaste, and I’m impressed with the results. This thermal paste is clearly engineered for high-performance applications and demanding systems like gaming PCs, overclocked setups, and even consoles such as PS4, PS5, and Xbox.Application was smooth and straightforward—the paste spreads evenly and has a nice consistency, not too thick or runny. After applying it to my CPU, I noticed a significant temperature drop under load, which gave me peace of mind, especially since I push my system with heavy gaming and mining.✅ Pros:Extremely high-performance thermal conductivityEasy to apply with even spreadNoticeable temperature reduction on CPU & GPUIdeal for overclockers and high-demand builds❌ Cons:A bit pricey for the small 1g tubeBest results only when applied carefully💡 Tips:Clean off old paste thoroughly with isopropyl alcohol before applying.A pea-sized drop in the center usually works best for CPUs.For GPUs or larger dies, spread a thin, even layer for full coverage.Keep an extra tube on hand if you frequently build or repaste.Bottom Line:If you’re serious about system cooling and stability, Thermal Grizzly Kryonaut is worth every penny. It’s one of the best thermal pastes I’ve used, and I’ll definitely stick with it for future repasting jobs.

I bought this paste for 3 different devices: an Asus G20CB desktop, an HP Pavilion desktop, and a 2021 Asus G14 laptop. After verifying that the paste was authentic, application was pretty straightforward and easy since it came with 2 different nib/spatula tips for the syringe of pate.I basically run stock after removing the bloat, no overclocks or anything, but I still wanted to repaste due to improvements to temps. Because of that the 2 desktops didn't see much difference, 3–6-degree Celsius give or take for the CPUs and GPUs. And even now, it is still holding the same temps as it did underload as it did when I 1st repasted it.My G14 however did see a sizeable improvement from what it originally had; CPU saw a 13 degree drop and GPU saw a 5-degree drop. I can't really say if it was because the factory liquid metal application was botched or just old, but this paste does well enough to keep the CPU from going past 85 degrees since before repasting my highs would sometimes reach 100 degrees and prevents my fans from turning into jet engines. It did last a good 13 months before temps are starting to slowly climb, so I will need to repaste soon. Will probably try Hyronaught this time since others reportedly say that it is better for laptop use due to higher idle and heavy load temps.Overall, it is an excellent product (if authentic, BEWARE OF FAKES). Yes, it is expensive, but the performance results do speak for itself and the reputation that it gained as a go-to by known overclockers is warranted; but it is ultimately up to you how much you value that improvement and if it is worth the price. For me however, despite not being an overclocker, it was worth every penny since lowering those operation and idle temps is just another way to have my last longer.

Great thermal paste, plenty to spare if I need more, and did a great job cooling my PC better. Recommend to anyone who needs a quick and cheap fix to their cpu paste. Installing was very easy and the adhesive sticked well. Recommend to absolutely everyone.

What can I say, the name speaks for itself. I've tried many other thermal paste brands and yet here I am once again leaning back to thermal grizzly, nonmessy and temps are low. Never had any any issue with thermal grizzly I quite honestly believe theyre the absolute greatest thermal paste producers!!!

This thermal paste performs well and does its job as expected. Temps improved compared to older paste and it spreads easily during installation.The only downside is the amount included — the tube is very small, so it’s best suited for a single application or quick job. Overall, good quality paste, just not much of it.

Let me preface this whole things by saying that Kryonaut is a really good thermal paste for cpus. It helped decrease my tdie temps by a massive margin (over 5 degrees), and thermal conductivity is impressive while being easy to apply. But putting it on gpus... let's just say I bought this before I had actually done proper research because I had heard so much good about it. *sigh* time for the long boring essay...**TL;DR: pump out is bad for long term thermals and this has especially bad pump out. anything with IHS (cpu) gooood, anything without (delidded cpu, gpu, socs, laptops, etc.) baaadA lot of people tend to think thermal paste is either all the same or only look at conductivity. However, with this paste, I figured out the hard way that thermal paste is way more than heat dissapation. Pump out occurs through many repeated cycles of rapid heating and cooling and causes the thermal paste to dissipate outwards and leave little to no paste on the core, usually through a long time period (3-10 years, depending on quality). This is more prominent on gpus as those have no ihs and tend to heat and cool more violently than cpus do. Thicker, more viscous thermal pastes are less prone to this. Unfortunately, this thermal paste in particular has especially terrible pump out because it's thin and watery.It worked WONDERS on my cpu as I mentioned earlier. An already great temp of 65c or so fell to 55-60 while gaming in ambient 22-27c. No pump out issues and it stayed like this until I changed coolers.On my gpu, it worked well - at first. 55c with 8 degree delta between hot spot and core. It almost instantly (within a month or two) started to have bad deltas (meaning pump out was causing die to heat up in certain spots more than others). Delta was around 8c, then slowly rose to 15c+ (worst I saw was 20c) and core temp also rose from 55c to 60c to 65c. When I replaced it with a thicker, much more resiliant thermal paste (thermalright tfx), it has been consistently good at ~57-61c and 10-12c delta for the past 3 months.All in all, it's a great paste that has amazing thermal conductivity (although that standard is nonexistent). your cpu temps will drop if you are replacing old or otherwise low quality thermal paste. However, it's a lot of money for the amount of paste you get, and being the way it is, it is not designed for direct die contact, so bear that in mind. Be aware that different thermal pastes have different use cases, and this is not for gpus. If you want that from thermal grizzly, there is hydronaut and liquid metal (though I have not used either). I personally just recommend arctic mx5 and tfx and maybe noctua nt-h2.

Easy spread works amazing. Build a lot of custom pc's and this is my favorite by far l. I mean let's be honest we are only talking about a degree or 2 between most of the best thermal pastes available. still amazing little product. Highly recommend

Bought this 1g Kryonaut syringe to repaste my Acer Predator Helios Neo 18. This laptop packs massive power but runs hot out of the box, frequently pushing past 90°C under heavy loads. The paste is quite thick, but the included spreader tool makes it easy to paint a flawless, thin layer over the bare CPU and GPU dies. My peak temperatures immediately dropped by about 9°C, completely eliminating thermal throttling stutters in my games. The PredatorSense fans also don't have to scream at max speed anymore. Perfect upgrade for any large-format gaming laptop

super produit

صارله ٤ شهور والى الان نفس الاداءكانت توصل حرارة المعالج عندي ١٠٠ حاليا حول ال٨٥ واداء ثابت من اول ماحطيته الى الحين (٤ شهور)

Detta är den i särklass bästa kylpastan jag använt. Sänkte temperaturen ett par grader mer än motsvarande kylpasta som köpts från Inet.Rekommenderas.

I expected nothing less10/10 cooling for liquid or air coolersGreat for overclocking with reasonable tempsPrice is a bit high thoThe Market itself selles it 100 pound cheaper

Después de utilizar Thermal Grizzly Kryonaut y Kryonaut Extreme en multitud de equipos y configuraciones, sigue siendo una de mis pastas térmicas de referencia para montaje y mantenimiento de hardware de alto rendimiento.La he probado en:* CPUs Intel i9, i7, i5, Xenon* AMD Ryzen 9, 7, 5* GPUs NVIDIA GeForce RTX 3090, NVIDIA GeForce RTX 4070, NVIDIA GeForce RTX 4080, NVIDIA GeForce RTX 4090, NVIDIA GeForce RTX 5090, por poner algunos ejemplos* PlayStation 5* Xbox Series X* Y muchas otras configuraciones de PC y consolasEn todos los casos el comportamiento ha sido excelente, especialmente en temperaturas sostenidas y cargas intensivas.Rendimiento térmicoDentro de las pastas térmicas tradicionales de alto rendimiento probablemente sea una de las opciones más potentes y equilibradas del mercado sin entrar ya en metal líquido.✔️ Muy alto rendimiento térmico✔️ Ideal para CPUs y GPUs exigentes✔️ Muy estable en cargas prolongadas✔️ Excelente para gaming, render y trabajo intensivoAplicación y texturaUno de los puntos que más me gustan es lo fácil que resulta extenderla. Tiene una textura bastante equilibrada: suficientemente densa para mantenerse donde debe, pero sin convertirse en una pasta difícil de trabajar.Esto ayuda mucho especialmente en:* GPUs grandes* Consolas* IHS de CPUs modernas* Aplicaciones donde buscas cobertura uniforme como en procesadores gráficosContenido del pack de KryonautEl pack viene bastante bien presentado e incluye:* Jeringa con la pasta térmica* Aplicadores/extensores* Documentación y autenticación del producto* Embalaje bien protegidoDetalles pequeños, pero que ayudan a una aplicación limpia y cómoda.Kryonaut ExtremeAdemás, el producto cunde bastante más de lo que parece inicialmente gracias a la cobertura uniforme que se consigue.Pros✔️ Rendimiento térmico muy alto✔️ Aplicación uniforme y limpia✔️ Incluye espátulas y accesorios✔️ Calidad premium total de Thermal GrizzlyContras⚠️ Precio elevado frente a soluciones básicas⚠️ Más orientado a entusiastas y hardware exigente⚠️ Conviene aplicarlo correctamente para aprovechar todo su potencialA tener en cuenta⚠️ No es una pasta barata, aunque el rendimiento justifica bastante el precio⚠️ Para uso básico de oficina probablemente sea más de lo necesario⚠️ Conviene aplicarla correctamente para aprovechar realmente su potencial➡️ ConclusiónUna de las mejores pastas térmicas de alto rendimiento que se pueden comprar actualmente. Excelente conductividad térmica, fácil de aplicar y muy fiable incluso en hardware extremo. En mi caso sigue siendo una apuesta segura tanto para PCs de gama alta, servidores y workstations profesionales como para mantenimiento de consolas.