Permatex 27200 Hiigh Temperature Threadlocker Red, 10 ml

Very good stuff works great highly recommend

I used this to install a new thermometer on my gas grill! After several uses and over 500 degrees it’s still holding!

This is a very good quality thread lock compound. It lubricates the threads for assembly but doesn’t take long for it to set and lock the threads. Just understand that the application cannot be undone without a high heat torch. The price was better than I saw at the auto parts store. I used this thread lock on the studs that thread into the crankshaft where the flywheel and outdrive coupler attach with flare nuts. Whoever put together the boat engine originally didn’t use thread lock as the studs slowly loosened and some actually fell out. Not wanting to pull the engine out again, I throughly tested the installed studs with a torch and a pair of vice grips to make sure the engine heat would not compromised the thread lock. I heated up the studs to about 300 degrees. I could not budge the studs at all. Perfect!

Works as intended

Used to seal a rethread on a spark plug

Great product and fast shipping. Was exactly as described. Packaging was great.

Came in handy with sportster primary, stator, rotor, friction plate work! I had to remove one bolt after I used this stuff…it works!

Let cure first before Putting screws in on Helio Coils

他社で量が少ない耐熱高強度のネジロックが廃番になってしまいこれに切替え デフを組む際のリングギヤボルトに使用し、問題なく走ってます

液が出なかったので、返品交換になったが、交換品もボルト2本分の量しか出ない。

Pour des assemblages permanent, ce produit est parfait.

worked as advertised everything fine so far.

i will order more if it was cheaper