Water Testing Kit - 8 Pack for E. Coli and Coliform Bacteria Detection | High Sensitivity Water Testing Kits for Drinking Water or Well | DIY Water Quality Tester for Professional Use

This DIY test is more affordable and has a faster turn around time than the local state run laboratory - the product worked as described, and I like knowing that I have more tests on hand to use this upcoming season. Easy to use, easy to read.

Tap water at my new rental smelled terrible. After some research, I found out that there were a few potential causes — some harmless and some not. This prevented my family from making the mistake of using that water until the problem was resolved and allowed me to have evidence for the local authorities and management company. I was able to test again later to confirm the problem was resolved.

Pretty straightforward and easy to use. I did 2 tests.. 1 with our untreated well water (that i know has 35 ppm bacteria) one with treated water w uv light. At 48 hours both samples looked the same (bight yellow) it took another 3 days before the contaminated sample showed bacteria ... I wouldn't use this if you need something accurate. Reading it is straightforward but it's hard to accurately determine how much bacteria you have with the color system they use

Very pleased with product, do have to be careful not to overfill. The test tubes arrived, ahead of time, but with apparently scarcely any media (yellow powder) or none at all in the tubes - turned out it was there all the same, and works, as so little powder is required. I admire the promptness and ease with which both Amazon and the Seller guided me to resolve the issue in a simple, straightforward way, when the unexpected can rouse feelings that could muddle the process: a hearty "well done!" to both! I like that the product is compact, and can give results after just a day or two incubation (depending on temperature). I use a precaution of applying 1:1 dilute bleach & wait 1 min, and run water 3-5 min after, to avoid false negatives or false positives. I use it to check our water supply system in 4 places: from an outdoor hose bib, and from 3 sink faucets.

Este producto me hizo ahorrar porq verifiquè que mi agua podia ser tomada

My initial test, using tap water, came up negative, based on the pale yellow color of the liquid in the vial after a couple of days. Since the reviews of many of these test kits complain of false negatives, I decided to verify the quality of this kit by testing water from an unflushed toilet (I know, yuck). That test came up negative as well; after several days, the color of the water was indistinguishable from the color of the water in the first vial. Update: A few days after writing my initial review, when I went to discard my used test vials, I saw that, lo and behold, the "control" sample had in fact changed color. It took far longer than the 48 hours described in the instructions (this sample was about a week old), but it did yield the expected result.

Used it twice. Both trials were easy to do and successful.

As advertised

As someone concerned about the safety of my drinking water, I decided to try out the AquaVial Water Test for E.coli and BZW. Coliforme bacteria detection. Overall, I found it to be a valuable tool for a quick and easy water quality assurance. The AquaVial Water Test kit was straightforward to use, and the instructions provided were clear and easy to follow. It made performing the test a hassle-free process, even for someone with little technical expertise. I was pleased to see that the test appeared to work as intended, and it gave me some confidence in the safety of my water supply. The fact that it detects E.coli and BZW. Coliforme bacteria adds to its reliability and provided an extra level of reassurance. For home users like myself, the AquaVial Water Test serves as an essential sanity check for drinking water. It's a quick and convenient way to ensure that my water quality meets basic safety standards without the need to wait for lab results. However, it's important to keep in mind that while the AquaVial Water Test is useful for basic assurance, it cannot replace a comprehensive lab test. For critical situations or when facing potential health concerns, seeking professional lab testing is always recommended. In conclusion, the AquaVial Water Test is an excellent option for those who want a simple and effective way to ensure the safety of their drinking water. Its ease of use, clear instructions, and reliable detection make it a valuable addition to any household. For routine checks and added peace of mind, this product is definitely worth considering.

Successfully found bacteria coming from my reverse osmosis water filter system. After disinfecting the tap after the last stage of the filter using a de-calcification liquid I tested the water again and there were no more indications of bacteria, also the water now tastes better/perfect.

Convenient, and reasonable cost compared to labs. Had a new well drilled, and after a lot of running around(since the cottage is in another province) I had to use a private lab for the first test (because I wanted documentation for my real estate file). Now I use this product annually at the start of the season as a simple, quick test. I now take one of the pack down to check Mom's seasonally used place once a year, so I use the 4 within the 2 yr shelf life.

La atención de la empresa es genial lo recomiendo lo malo que el envío pero es muy buen producto

Tal y como imaginaba facil de usar.