EVGA DG-86 Full Tower K-Boost Software Fan Controller Gaming Case (100-E1-1014-K0)

Case is very, very large, box was absolutely massive. 4 stars because i have a few minor complaints 1. Scratched PSU trying to put it in, and broke one metal strip on the grill for the fan. PSU is CX750M by Corsair 2. You can see PCB near the temp/fan LEDs. 3. Not typical mobo standoffs, but this is preference. 4. When using an ATX mobo some cables are just barely too shot, but can work with, does not look as nice. This case is amazing for cable management, robust materials side panel is a strong acrylic and rear one is solid rigid metal. I love the size, though it does slightly look like an old CRT TV. One thing i LOVE is that external drives, well to put it one way, become internal. They are put out of sight, out of mind. I have a hybrid GPU and i fit a 240 & 120mm rad on top, though a tight squeeze. This case has insane fan support, too, a bit loud, but that can be controlled with the software. The hard drive and solid state drives in the rear of the case do not hinder cable management, I have 0 bulge anywhere. With all that being said, if you do not mind your case being as heavy as a boat anchor, and looking a bit retro, this is a great case.

Ok i love this case. There are things i would love more if they were there. It is so big it needs wheels. Like my old cooler master HAF932. Which is slightly smaller than this case and has wheels. there is alot of plastic on this case. but it good plastic. meaning tough and not brittle. has amazing air flow and supports any motherboard in the world. i love how this case comes apart well thought out to be able to get to everything to install. I do wish it had tempered glass but what is in there is really good compared to the clear plastic on other brands. doesnt seem to scratch easy and is way more clear like real glass. some cons about it. no manual no support online from evga about this case. this website is blank in this case section on their site. no screws no case equipment and their was sum shipping damage on the box. but product seems ok. overall im loving this case. it is over the top huge but easy to get to every thing cuz everything comes off nicely well engineered

This case is absolutely massive. I will say that the cable management is great. I bought this case with the intention of someday using it as a VR gaming rig which I think this product would be great for but with recent trends the panel for the VR rig on the side of the case will be obselete before I get into that realm The fit and feel of this case is subpar at best. I received this case with some of the snap fits broken. Over the last few weeks it seems like the fit is getting even worse with the back panel not closing very well. I also really dislike the snap in panels all over the case. They do not feel secure and if you ever have to move this case may cathulu be with you because the power supply snap panel (ok the bottom) and the front panel will most likely want to come off. Not to mention the power supply filtering the bottom which will probably break after I move this case a few times (where else do you want me to pick up this 20lb case?!) I would not recommend this case unless you have pesky cats that think wires = chew toys.

So much room in this (DG-85) case. So many possibilities for different custom computer builds. Was hesitant to buy this at first, but for some reason the retro, sort of "90s projector tv" look got my attention. So far, I'm pretty happy with it. I have plans to build up my current pc, which is rather lackluster in it's current state. The case feels like it's overall pretty sturdy with its construction, with only a few things that may or may not bother others. Pros: -Nice, big case -Ample room for cable management -Retro look (if you like that sort of thing) -Multiple USB ports (2x 3.0, 2x 2.0, both standard type A) -HDMI passthrough -Overall construction is sturdy Cons: -Lack of storage drive bays -Ugly, useless basement -Flimsy front door/window panel -Window (and most of door) made of plastic -Mounting for extendable PSU cover scratches PSU For some reason, it was decided that this "lesser" model would not come with several components, like the basement storage drive bays, rear airflow "door", and reservoir mounting bracket. The extendable plastic PSU shroud feels like an afterthought, and the screws that mount it inside the case can scratch the crap out of your PSU. I'd honestly just remove it and toss it in storage. The front door is mostly made of plastic. The metal frame just sort of holds onto the plastic piece with metal tabs that bend around the edges of the plastic in a few spots, not to mention the door's hinges are also plastic. Definitely remove the window panel while working on this case. I fully plan on performing some modifications on this case, such as altering the sort of mirror panel on the bottom front of the case, as well as fabricating a custom basement shroud for aesthetics. Also, the large acrylic EVGA logo panel inside is quite an eyesore, and I feel like the included white LED strip could have been made to be mounted on the top of the case. Overall, if you feel like doing a little modding, this case has a lot of potential.

LOVE IT

Es excelente el flujo de aire y la capacidad de de HDS que puede tener, hay que tomar en cuenta que la ventana es de acrílico para cuidarla que no se raye, para un manejo mas fácil de los cables recomiendo remover las 2 bahías de montaje de HD para pasar los cable de fuente de poder de lo contrario se dificulta mucho pero solo es cuestión de armado, ademas hay que contar con cables Satas de 45 cms para los disco que van montados en la parte posterior así como los de alimentación, me encanto el espacio de atrás ya que es enorme y permite un buen manejo de cables, otro punto a tomar es que los conectores de dispostivos en la tarjeta madre entran por un apertura y solo por esa, hay que organizarlo muy bien lo mejor de todo es que los compre a menos de $3400

Diese Gehäuse bieten Platz für Server Mainboards mit bis zu 4 CPU. Sehr gute Lösungen für Kühlung und Kabelführung. E-ATX-Format: 305 mm × 330 mm (12″ × 13″) Wurde von Amazon in 2 Tagen von USA geliefert... Hut ab !

The case' build quality is good. It supports EATX motherboards but the standoffs are built into the case so if your motherboard' standoff slots aren't in the right place the mobo won't fit right; that's what happened with me. I have a Supermicro X10DRI-T and it's slots don't match up. Had to return it!

para mi gusto este gabinete es el padre de muchos, esta enorme y muy bonito para armar un equipo extreme