Reversing Camera Ease Setup Plug-Play - Color Clear Image Night Vision DIY Guide Lines HD 1080P No-Delay Rear View Camera with Monitor Waterproof LED with On/Off Switch for Car/SUV/Truck Tomoia T1

After a fair amount of research I chose the Tomoia reversing camera as I didn't want to have to wire in anything and it seemed the simplest solution. I have a car version of a van so have got a tailgate . The number plate is on the tailgate but the reversing light is not so I couldn't really use a wired system very easily that fits on the number plate.The solution for me was to mount it inside the car on top op the tailgate window. The wires only need a little bit of slack when I open the back and as the camera is inside the car it's not likely to get lost. I have enough vision for parking and the screen is clear and bright. There was plenty of cable supplied so all I had to get is some cable clips for the wires and double sided self adhesive strong tape to fix the camera on a bracket.The quality of the whole kit seems good, the screen is bright and the camera is sturdy.So much easier to park now, I'm very pleased with my purchase.

Fitted to a 2.4m East Neuk Fifer campervan Fiat Ducato (SWB)Was a bit sceptical as so many others are more expensive and NOT as multi-functionale.g.1.A Wi-Fi type has to be hard-wired and 2. A rechargeable Solar rechargeable has limiting charge/power duration .....This Tomola system however has lots of options! It is also the No.1 Amazon Seller for a reason.I was going to purchase a WiFi version however this Tomola option means we can use it as a Rear view camera for normal driving AND for reversing. Just plug into the cigar lighter and press the Red Button for an instant ' no screen lag" screen view. Brilliant!Attachment: We were going to place it up high but the Number plate feed route meant no drilling required to attach the camera - it just sits over the number plate - You must NOT obscure this so allow 11mm between the letters (These are DVLA Regs).I did NOT want to drill in our roof and wanted the location to be discreet and neat - I Did NOT want to wire into Reverse light OR number plate light ..........The Fix:However ended up drilling through the number plate perspex light ( a tiny hole), feeding the camera wire through the rear door panel (easily accessible) , alongside the rear light electric system, and then leading to the screen on the dashboard under the campervan seats. The wire comes in 2 sections from the camera and simply plugs into the 23' wire that leads to the monitor and 12v cigarette lighter port. Other options are available should you wish to wire in to reverse lights or number plate lights.The camera sits on the number plate - Adhesive patches are supplied with the kit.NOTE:The camera has an inbuilt Light sensor so when dark 6 LEDS will light up rear surround in the camera - There is an option, however to do a vasectomy on a GREEN wire that will permanently disable this feature. A simple snip! I did NOT do this opting to cover the LED lights 3 on either side of the camera with Black waterproof tape and rely on the campervan reversing light which is more than adequate.Camera / Screen quality:The camera housing is ideally small and the build quality is excellent - It has a small rain shroud x3 LED lights on either side and x1 Day / Night auto sensor. By day the LED lights do not function. The metal mount slips over the rear number plate held by the adhesive patch and friction.The screen quality is clear and at night when reversing we can see clearly without the camera LED lights helped by the rear van reversing lights.You can set up with guidelines being adjusted Vertically or Width and Offset, (as in our case) and of course, the camera angle can also be adjusted up or down as has a hinge. There are options to not use the guidelines, to adjust the brightness, contrast, and tint of the screen image RESET the system. Once configured the way you want it these become superfluous.Took about 2 hours of my faffing - (could now do in about 15 minutes ) , to lead cables and drill small feeder holes within the van, but well worth it for our purpose, this is an excellent system for our specific 'Dual need"s - We can use when driving and reversing - Day or Night.The unit can take a 2nd camera and there is an option to obtain from the seller in the Use guide - so potentially a 2nd camera could be used as a security camera or a front camera.Highly recommend and the User Guide is very explanatory.

The installation instructions were detailed and easy to follow. Wiring length was more than enough to reach the back of my camper. The screen size is perfect and the image produced is quite good. Not the best at night, as it ia not an infrared camera (they are more expensive), but I can see enough so I can park safely. All in all, very happy with my purchase. Let's hope it lasts long enough as it is exposed to the elements.

I bought this reversing camera to use when driving my car and also when towing my caravan as I wanted a better view behind. Firstly I set up the monitor in the car, the setup was simple and the instructions were easy to follow, just as described plug and play. There was plenty of cable to connect the monitor to the camera at the rear. The camera has an adjustable fitting to connect it to the rear tailgate door near the number plate. Be careful not to obstruct the number plate. The settings for the monitor are easy to follow and the picture is bright and clear and a much better view than my rearview mirror and side mirrors. You can also adjust the grid lines for parking or turn them off if you don’t want them.I also bought an extra 50 ft cable from Tomoia to connect between the rear of the caravan and the back of my car. This now gives me a much better view of the road behind my caravan than just with the towing mirrors I attach to my car’s side mirrors.Delivery was speedy, I have no complaints so far so 10/10 Tomoia

AMAZING,easy to fit the picture quality is really clear well worth every penny night vision very good too.

Great quality screen , and easy to setup and useHad purchased a camera feed extention cable to be safe that i ended up not needing as the supplied cables are more than enough for tidy cable routing on long car/suvAltho anything bigger than landrover/estate will need an extention

I purchased this rear view mirror to do away with the side mirrors on my cabin car as the mirrors were for ever getting knocked or broken, or having to be pulled in and then re adjusted when trying to negotiate through narrow accesses.It arrived as per Amazon prime on time. As suggested in manual I took it out of box,, plugged it all together and then plugged into a USB socket in my car and bingo, it all came alive. When I read the gen on the camera it said 12v and usb but it also works on 24v.I did have to purchase a usb to cigar lighter adaptor as there is no cigar lighter in ny vehicle but one was available on amazon.I did not want the camera outside so my son fitted it to the rear window and gives a nice wide angle view,and the viewing screen is right in front of me.As I have such a small car there was plenty of wire but that was easily bundled up and stored under the seat, out of sight.I have tried it out and I think it is great value for about £40 including adapter and was easily set up .I would recommend it to anyone.