ESR for MagSafe Sticker, MagSafe Ring for iPhone 17, Samsung Galaxy | 2 Pack Metal Ring, Universal Magnetic Wireless Charger Conversion Kit for Google Pixel 10, Magsafe Accessories, Black

I'm using this in ways it says not to, so grain of salt here, but it works perfectly for me. - I'm using it on a Pixel 9, not an iPhone or the listed Samsungs. Since there are no templates included for the Pixel 9, I had to play around with placement for a while before I was comfortable that it would work for charging. I eventually found that one of the Samsung templates did actually place it very close to where I needed it, but that was only because the alignment adapter didn't fit all the way into the charging port as intended. See the photo for what I mean. But as long as you "practice" placement first to find the best spot, it can work on other phones not listed. (I recommend placing the ring on your magnetic charger magnet to magnet and then moving the phone around on top to find the best spot... then press the phone down to stick it.) - It adhered very well but I'm using it on a vinyl skin, not a case. So there's less interference but it could also be less durable since it's only as strong as the skin is. It's held up for the few days I've had it installed but if anything changes, I'll update, though I wouldn't fault the ring for that since I'm not using it as instructed. - The magnet is very strong. I use a magnetic wallet and it attaches much, much better than the Magsafe MOUS case I had on previously. That was strong enough not to lose the wallet but I could remove it quite easily myself. With this, the wallet isn't going anywhere and it takes quite a lot of force to remove it for charging. - It's super thin and light but holds well. I got white and it looks nice, even though it's obvious. I don't anticipate needing the second one unless something happens to my skin and I need to replace that, but glad to have it as a backup. All around very much recommend. And for what it's worth, I realized I own 2 other ESR products—the 3-in-1 travel charger and an iPad case—and both are great and very high quality. So I'm now on board with this brand at this point. We'll see if that continues. UPDATE 6 MONTHS LATER: DURABILITY: The ring has been working great! And still very white (no staining) and not a scratch on it despite the fact that I slide my wallet on and off and put the phone on and off a standing charger daily. However, I accidentally ruined my vinyl skin—dyes from a new pair of jeans I didn't wash enough first mreh—so since this pack comes with two rings and I had an extra lying around, I decided to just replace my skin/ring. This gave me a chance to try and destroy the old ring while it was still attached, just to see how it held up...... yeah, that sucker ain't coming off naturally heh. And it took a of scrapes but was still magnetized (and charging) just fine. I eventually just removed the vinyl skin with the ring still attached so I could move on. It holds up! TEMPLATE: So the SAMSUNG A template does indeed work for the Pixel 9. Last time, I'd discovered afterwards that this particular template was very close to where I'd eventually installed the ring after a bunch of testing. This time, I just went straight to using the template. So, I installed my new vinyl skin, plugged in the template attachment as far as it would go, put the Samsung template on rung A, and stuck down the ring. All is well. Worked like a charm!

Easy to install. I have a Samsung fold 7 with a zagg magsafe case. But the magnet is so weak and finicky, I couldn't even use my powerbank, so I opted to order the ESR magsafe sticker ring. Best decision I made. I removed (pried is more like it) the magnet from the zagg case, aligned the sticker using the guide provided, cleaned and dried the area and Poof! Now the powerbank charges, magnet is super strong! Very happy, this small purchase (15 for a 4 pack roughly $4 for one) saved my &100 powerbank purchase and the $50 I spent on the initial zagg case. Highly recommend this product!

Got one of these for my Pixel 6a in an OtterBox Commuter case. I couldn't use the alignment tool because of the USB C cover on the case so I had to position it manually, which was oddly more difficult than I expected. After a week I ended up removing my first attempt because it wasn't quite in the right place for my grip, just a quarter inch too high, which really leads me to my one complaint about this otherwise great magsafe ring: the adhesive. It adheres extremely well to the rough texture on the back of the Commuter case, actually a bit too well. It was very difficult to pry up an edge on the ring, and my spudger ended up cutting into and smearing the adhesive around as I was working my way around the ring, leaving much of it on the case. I'm not sure what this material is but it's very sticky, breaks apart easily, and leaves a strange residue behind. An almost gum-like consistency. Some goo gone, rubbing alcohol, and elbow grease, and I was back in business, but man, what a pain. Swap that out with a nice 3M adhesive, something that tends to remove in a single piece, and can even be repositioned, and maybe include some or one replacement (even if it's a touch more expensive) and this thing would be perfect. Other than that, it's very thin and stylish, and it's rock solid with the magsafe accessories I've tried. I paired the ring up with the metal metisinno magnetic base and a popsocket, then the lamicall magsafe mount for my car. The latter fits right over the top of the popsocket and the magnets in the lamicall mount attract to the metal back of the metisinno base under it. I can leave everything as is when I move in/out of the car. It's the perfect setup for me, one I've been trying to find for years. At no point do I have any concerns about the strength of the magnetic connections between any of these. It takes real effort to separate them. Just triple check your placement of the ring, because you'll have a heck of a time removing it, and will not be able to reuse it after.

BACK STORY: I really am satisfied with the MagSafe ring (Halo) holder / stand that I purchased some time ago, and have purchased several of them since then. I already had a case that I was really pleased with, but as it wasn't magnetic, I attached it using a several adhesive spheres from a third party and had no trouble. The case subsequently broke following multiple drops, but I bought the same one as I very much liked the case. This time, despite using the same MagSafe ring stand and the new pieces of the same adhesive, I couldn't get the ring to stay on. I even bought new adhesive, to no avail. I even purchased a new ring, just in case. That also wouldn't stay on with two other adhesives. REVIEW: I saw this listing and thought this item would solve my adhesion problem, particularly given the item description... "Upgrade to MagSafe Ready to Go Magnetic Want MagSafe but love the case you already have? With the HaloLock Universal Ring 360 you don’t have to choose. Just install to convert your standard case to MagSafe and start enjoying magnetic wireless charging and a whole host of accessories to snap on the back of your phone." It sounded like just what I needed. I cleaned the phone case as instructed then attached one of these rings. I gave it 24 hrs to cure, then attached the ring / stand, and everything fell off. The same thing happened with the second one I tried. I even bought a second set of these rings in case it was my mistake, but, for the third time, the ring would not stay on. Finally, I attached this adhesive ring to the back of my case using JB Weld (Professional grade) to attach this magnetic base to my case and it stuck. It held the actual Halo ring / stand on my phone with no problem. I've dropped the phone a number of times, and the ring stand has fallen off, but this magnetic adhesive base stayed on and easily attached that ring again. Other than the less than wonderful adhesive provided with these rings, I'm very satisfied.

Only been about a week, but I've got this attached to an Otterbox Commuter Case for my Samsung Galaxy S24 Ultra. While the instructions did not include an application guide for the S24 Ultra (only the S23 Ultra and other past Galaxy phones), I found a video and other sources online saying to just use the S23 Ultra guide markings and have found no problems with doing that. Seems lined up right where it should be for the S24 Ultra using the S23 Ultra marks, my wireless mag-safe dashboard mount seems to charge it just fine, as do mag-safe external battery packs using that S23 Ultra location. Others may also want to know that the slight texture of the Otterbox Commuter Case does not seem to be a problem for these rings. Time will tell for sure, but the ring adhered quickly and easily and hasn't come unstuck yet. It seems well-stuck, so I imagine it will be durable. I can't speak to the ease of removal at the time of writing this as I have not tried and don't plan to do so at this time. I know other reviews discuss this. As far as appearance goes, I wish I had gotten the black for my black case, but I had originally planned for a different color Case, and I think the blue would have gone nice with that. It just sticks out against the black case I have, but that is no fault of the product at all. The ring itself has a smooth but fairly matte finish, the company logo is on it but it's super subtle and is only visible if you're looking for it which I appreciate. The material is fairly rigid, a little flexible before application. It is definitely very thin. An average of five measurements of its height from the surface of the case after application is 0.71mm if anyone would like that information. As said, I haven't found that height to interfere with any wireless charging, seems to do that just fine. Last thing that feels important to note, if you do have a phone like the S24 Ultra which includes a stylus, and you try to use it with a mag-safe accessory attached (a pop-socket, a wallet, a charger, etc), the S-Pen (stylus) will behave weirdly where the magnetic field bleeds through the phone from the back. You won't get accurate pointing from the stylus in a number of spots. That's making me look into other solutions as it is important to me to be able to have a pop-socket style grip WHILE being able to use the s-pen, which doesn't seem possible with this ring and my current mag-safe pop-grip. But I'm sure that's not a deal breaker for everyone. Overall this feels like a really solid product, good price too. Ya get two of those rings in there.

For anyone to whom this review benefits know this: If you're looking to pair this up with a non-magsafe wireless charger with your magsafe case, know that this will not work for you. The ring holds next to no magnetic charge and its ONLY purpose is to turn non Magsafe Phones (or phone cases) INTO magsafe phones or phone cases. It has 0 value outside of that. Anyways, onto my thoughts below. Wasn't what I expected. It fits fine, the adhesion is strong, it was very easy to install and it was quite thin too. For $8usd I'm certainly not going to be too upset as it certainly cheap enough to not be upset about but it just doesn't feel like it did what I wanted it to. I was hoping this would be something where I could turn non-magsafe devices into a magsafe device. You know, so I could use my case and have it snap onto the metal ring and get wireless charging or holding something else. I do not think that this delivered on that front at all. Nothing about it appears to have ANY form of magnetic charge in the slightest, at least not in a meaningful way. It DID and DOES stick to my mag-safe case when it was just on its own, but once I applied it to the devices I was hoping would transform it into something I could more easily attach my phone to. It did not do this. Kind of disappointed. I can't give it a 1 star review because that would be unfair to the people who made this product, and this is merely probably an error on my own part. But I can't give it a 5 star review either because that would feel a little dishonest. Hopefully a 3 star feels fine enough.

I installed these ESR MagSafe stickers onto the inner case of my Samsung Galaxy S23 Ultra and Samsung Galaxy S22 Ultra OtterBox cases. I need to remove the soft outer case layer so that I can securely attach both phones to my OMOTON TP06 Magnetic Phone Tripod while taking photos. The magnetic hold and suction strength are excellent, and both phones stay very steady and secure during photography use. Using the ESR MagSafe stickers has made these phones much easier and more functional to use for taking photos, whether handheld or mounted as a tripod setup. I am extremely satisfied because this setup gives me much more flexibility and functionality when positioning my phones for photography projects. I would definitely recommend these ESR MagSafe stickers to anyone looking to add MagSafe compatibility to older Samsung phones that do not officially support OtterBox MagSafe systems like the newer Samsung Galaxy S25 Ultra and Samsung Galaxy S26 Ultra models.

This is a good product I have a Samsung 25 Ultra. The mounting system stencil works with Samsung 24 Ultra position as the 25 Ultra is not listed in my instructions. My Otter Box case has two back plates a hard plastic and an outer rubber case. My particular charger will charge through both cases. The metal ring was placed on the outside of the inner hard plastic case. However, the magnet grip DOES NOT WORK with Otter Cases. Need a stronger magnet on charger, ring or both. The magnetic ring WILL NOT allow enough attraction through the single soft rubber outside case

Works with all types of magsafe accessories and is easy to install. I am using it with popsocket and magsafe power bank.

The product delivered to me was different from what’s posted. Looks like a cheap brandless metal ring. Does not have the additional magnet to help keep magsafe wallet in place. Still have to test if it will work properly with mag safe chargers.

They work great. I use them to satisfaction. These black and white ones are only a little sharp. I also got the golden ones and they are sharp on the edges. What I like most is the branding is barely visible. That goes for all three colours I have. They ought to have chamfered edges though.

The ESR MagSafe Sticker / MagSafe Sticker Ring is a solid accessory that brings MagSafe alignment and compatibility to phones and cases that lack built‑in magnets. It sticks cleanly, is thin enough to avoid adding bulk, and consistently holds MagSafe chargers and accessories in place without frustrating misalignment. Installation is straightforward, and once applied, it doesn’t shift or peel under normal use. Magnetic strength is adequate for everyday wireless charging and light magnetic mounts — dependable without being surprisingly strong. Overall it does precisely what it’s meant to do: great fit, enable MagSafe functionality where none existed before, with minimal fuss and solid daily performance. Not flashy, but reliable and practical.

Great and the adhesive is strong on my case