7/8" Motorcycle Handlebar Switch Wiring Harness Kit 16AWG 2 Leads | 7/8inch Extension On Off Rocker Toggle 12V 24V with Fuse Relay for ATV UTV Dirt Bike LED Light Bar Auxiliary Driving Lights

I used it to wire motorcycle auxiliary lights, easy to install and it works fine. Lots of extra wire length that you won't need for a motorcycle but it's better to have too much than not enough.

I recently added this to my Honda Rubicon for my LED bar and it turned out soo good. Only problem I had, where the wires split to go to the switch and the battery they wasn't long enough, so I added about 3 foot of wire to extend them. Other that great works great, worth the extra effort and time.

Works great. Could have done it without the kit, but the harness made install so simple. Guess who is mowing at night now?

This wiring harness is well thought out and is easy to install. The only problem I had was the plastic on the switch housing is thin and one of the supplied screws stripped the hole out. I contacted the manufacturers customer service and they never responded. This one is fitted for an ATV and has a little extra length that allows easy adjustments when installing. Installation is straightforward and the instructions are pretty clear.

Wire harness made it very easy to get it set up and working.

Hooking this up to my atv was easy but I had to customize it alittle. The one wire lead is alot longer then the other so I had to trim it down. The included wire connectors didn't work out for me either but after some modifications I now have extra bright headlights so it was worth it to me. Edit. The relay that comes with it is junk. Iv went through 2 relays idk why bc they never got wet and was actually never used past the testing at hookup. Since hookup I plowed some snow during the day and took my dog on a few days runs so I haven't had to use my lights yet. When I did decide to use the lights the relays keep going bad for some reason. I ended up getting a waterproof relay this time so I'm hoping that makes a difference

I discovered Nilight many years ago on Amazon and their quality never disappoints. We've used the Nighlight LED lights and wiring harnesses on two trucks, a Mule, and several ATVs. Their products just work, the quality is excellent, and it's reasonably priced. Good job, Nilight!

It clamped down very nicely on my handle bar. All the wires are nicely sleeved so I’m not worried they will chafe. Was enough length to all the wires to have it connect to the battery, rear lights and the headlight and bar without issue. I actually took about a foot out of the harness to fit better under the seat. Would recommend this for an easy light install on most dirt bikes or quads.

Buena calidad, 2 años y sigue haciendo su función.

Like how they prepare the electric wires and fuse . Good quality, the installation much much easier and trust .

Easy to install, all in one and very durable.

Excelente producto de calidad. Muy practica su instalación.