VideoSecu Speaker Wall Ceiling Mount Bracket One Pair for Universal Satellite, fits Keyhole and Thread Hole with 1/4 20 Threads, 4mm and 5mm Black 1ST

There used to be a few generic speaker mounts specifically designed for junction box mounting, but they have all been discontinued for a long time and I was unable to find something similar anywhere. Another reviewer of this product modified it and mounted it directly to his junction box and posted photos of his setup. I won't reproduce his steps here, other than to say that instead of using a plastic blank wall plate, I used a metal one, and instead of driving one of the mounting screws into a block of wood, I just used a machine screw and nut combination for the mounting hole that was not being driven into the slots on the junction box (if you do this, make sure your speaker wire jacket is undamaged/properly insulated to prevent a short if they hit the machine screw. That being said, the method described by the other review would have also worked well, I just didn't have any extra lumber handy. Please note that my satellites are only 3 pounds--although this mount technically has a 10 pound weight limit, I would be very hesitant to mount any speakers heavier than 5 pounds using my method if you have plastic junction boxes (if your boxes are metal and properly secured to a stud, you might be able to use the full 10 pound limit). Overall, I'm very pleased with this hacky setup. Even when used in ceiling-mounted junction boxes, the mounts and speakers are sturdy and aren't going anywhere, and they allowed me to mount the speakers in an unobtrusive way that uses the existing junction box to hide the speaker wire.

I'm specifically here to let those who own the Boston Acoustics Micro 110x surround speakers that these work! After 4 years being divorced I finally got my system back including a solid Denon receiver. However the ex lost the surround mounts, the power cord for the subwoofer, the remote you name it! Because my speakers have the mounts on the bottom this mount worked perfectly! Screwed right into the mount terminal, tightens up and very versatile. Got the wires run through the attic and ready to go. Waiting on the power cord for the sub but when it comes I am going to have a good old time! The speakers are 3 lbs and these mounts hold strong! One thing other reviewers have stated is that the ball at the end of the arm does get scratched so wait until you mount it to get it properly positioned but I am sure it will hold up to 5 lbs at least if not the specified 10. The hardware stinks as other stated so I grabbed a good set of drywall anchors at the local box store. I have no doubt these mounts will hold for the future. If you have the same speakers this is the mount! Great price, fast shipping and a perfect fit!

These are super inexpensive and work great. Not the best looking wall mounts I've seen, but they are pretty small so they will likely be hidden behind the speakers while looking directly at them. From the side you can see them though and they look OK. They are metal and very solid. With proper mounting (in a stud, or with the right anchors) they are very solid. There actually is a hole behind the ball mount system where if you have cables thin enough you could have the cables come from the wall through the mount, however I think most people will have cables that are too thick. Just about everything you will need is in the box. They come with the wall plate and two mount options, a stright piece, and an angled one intended for ceiling mounting. They also include screws that would be appropriate for stud mounting, and an allen wrench for adjusting the ball mount. I mounted 5 Anthony Gallo speakers with these, two A'Diva Ti and 3 Nucleus Micros. For my purposes the straight mount worked well, but I could have used a shorter threaded piece. In addition the wing nuts provided to tighten down on the speaker didn't work as the mount point and the speaker terminals are too close together on that speaker. I found a way to make it work, but it would have been nice if some regular nuts had been included also for such a situation, but I can understand why they aren't as that is probably an unusual issue. Once the speakers are installed and mounted they are solid and there are no rattles or vibrations. All in all for the cost there is no question these are probably the best you will find.

It has been a while since I have written any reviews on Amazon. It makes sense to write it for this product because of it's low price and most folks are not going to expect much for such a low price. This package has all of the parts you need to hang and install two satellite speakers. The box has the brackets and all kinds of parts so you can install it straight off the wall or you can drop it for a ceiling mount. The box includes the tools needed to tighten the bracket, wall anchor and screw, an adaptor for the different thread sizes on the back of the speaker (the thread sizes come in a few different sizes and thread pitch, and the ball socks for an off the wall install or a drop install for the ceiling. I usually look at instructions but this was pretty easy to figure out. After seeing the kit, and installing the first pair, I would have paid more just for the ease of installation. Hope your install goes as smooth as mine did! Take care.

Easy to install, looks nice and is well made with no sharp Edges. If your looking to mount small speakers, cameras, or as I my case a router this will fit your needs. It has adapter for some metric threads with the main mounts 1/4”.

Perfect! Mounted on the ceiling, in corners. Pretty easy installation, and they solidly hold our Polk ES15 surround sound speakers (identical size [and weight, I think] to ES10's in case that helps anyone) pointing exactly the direction we wanted, which is diagonally down toward the center of the room. These were a great value for the price, and adjusting to get the angles "just right" wasn't too tough. Very happy with our purchase and would buy again.

Really good build quality. I've just ordered even more to keep on hand because I was so impressed by how small but sturdy these mounts are. I really like the angled attachment they come with too.

Se adaptaron a las bocinas Onkyo del teatro en casa que tengo y se ven muy bien.

👌

used to mount a pair of polk om3 speakers to the ceiling

Um ótimo produto