

📡 Tiny device, massive RF insight — never miss a signal again!
The Portable TinySA Spectrum Analyzer by SEESII is a compact, affordable RF tool designed for professionals and enthusiasts alike. Covering a broad frequency range from 100kHz to 960MHz, it features dual inputs with switchable filters, a crisp 2.8-inch touchscreen, and a rechargeable battery for over 2 hours of portable use. With built-in calibration and PC connectivity, it’s perfect for quick interference hunting, antenna analysis, and on-the-go spectrum monitoring.





























| ASIN | B08YJDZ3SC |
| Batteries | 1 A batteries required. (included) |
| Best Sellers Rank | #58,330 in Industrial & Scientific ( See Top 100 in Industrial & Scientific ) #14 in Spectrum Analyzers |
| Date First Available | March 10, 2021 |
| Department | suitable for many people |
| Item Weight | 11.7 ounces |
| Item model number | TinySA-SMA-UHF |
| Manufacturer | Seesii |
| Package Dimensions | 8.54 x 7.28 x 2.13 inches |
M**S
Great for hunting for stray interference for wireless mic channels
Radio frequency spectrum analyzers can be very expensive, heavy and complex. Only in the last couple of years has the technology been available, at a reasonable performance level and portability. TinySA (and it's big brother, TinySA Ultra) and RF Explorer are the leading breakthrough products in Spectrum Analyzers. They each excel at different aspects of measuring RF and , all in a similar price ballpark. The original TinySA is by far the cheapest, at around $60-70. It is also the most feature-limited (though it is very full-featured by historical measure). It is marketed largely to ham radio operators, but I bought it to sniff out RF interference that might affect my wireless microphone systems that I use for my documentary work. Documentation is a bit sparse, as this is designed and supported essentially by a single person. There is no documentation in the box. However, there is a Wiki and series of short tutorial videos created by the developer to cover setup and menu controls. Most third-party reviews and video tutorials focus on ham radio and other use-cases that are unrelated to my needs. The TinySA's 0-950mhz band width is perfect for me to sniff out the UHF band from 470-608mhz (the remaining legal bands in the US) for interference sources. This device is described as "less accurate" in the 350mhz and up band, but it's plenty accurate enough for me. If I was coordinating large numbers of wireless mics for a venue or a large production, this would not be the best tool for me. I would be much better served by the 3x more expensive RF Explorer, which has a decent desktop computer application and can export frequency scans to a file that can be read by Shure's industry standard free frequency coordination app ( must, if you are looking to coordinate large numbers of RF sources. RF Explorer is a professional standard in portable RF test gear that can interface with the apps for advanced analysis and frequency coordination. TinySA Ultra has a bigger screen and extra bells and whistles and boasts a much broader range of frequencies it can scan (including way up into the wifi range) but if you just need a very portable, reliable, inexpensive standalone RF "sniffer" to help you avoid and solve RF interference problems in frequency ranges up into the UHF range, TinySA does the job beautifully.
S**”
Nice for the price/ But there are minor flaws
The TinySA works just fine! And so far in testing, the accuracy of this device is not to bad. First thing, an ACTUAL instruction manual would have been really nice. There is no documentation at all on how to operate the TinySA. Luckily there are several YouTube vids out there to help you along.. The menu IS a bit confusing.... There is a lot of back and fourth in the menu to set the parameters you desire. Once again, nothing is clearly explained. The “LISTEN” feature seems to be disabled, this allows you to listen in on the frequency being monitored. I don’t even think there is an actual speaker in this unit. This is my MAJOR DISAPPOINTMENT! As this feature would have been very handy from time to time. When doing the SELF TEST of CALIBRATION, the high and low ports must be connected together with the supplied jumper cable!!! If you do not follow this procedure, the unit will fail the test and not calibrate correctly. For the price, it’s definitely a great unit and worth every penny....... Just watch the videos on how to use and setup the TinySA, as I stated..... It is a bit confusing to operate.
J**.
Decent Product, Has Some Quirks
This is overall a pretty decent spectrum analyzer for the price. Good for hobbyists, but I would not say it's good for much else. It's small and portable. I can't fully vouch for the accuracy of it, but the few items I've tested with known frequencies, it picks up fairly well. The only negative feedback I have for this product is that the touch UI is super finicky and the screen calibration seems to be off. But other than that, like I said, good for hobbyists
A**O
Se pasaron de bueno
Excelente producto!!!!! funciona muy bien
W**G
Know the terminology to get accurate readings
Perfect for testing your rig. Do scan the QR code for the operating manual. This is not a toy. It is a true diagnostic tool so you must know a few things about RF Spectrum Analyzers. Also pick up a good -40 to -50dB attenuator along with this Tiny SA or you stand a good to great chance of releasing the magic smoke from within. Google “Am I Testing my Baofeng Radios Wrong” on YouTube for an excellent tutorial on this great piece of test equipment.
D**T
Amazing value for the money.
Truly tiny with all the features our field service team needs for LoRa radio field applications. The ability to set preset frequencies and to scan and record these is exactly what we needed.
O**N
Accurate and easy to use
The only bad thing so far is the size, I had to use my strongest (+3.75) reading glasses to read the menu. I checked with my signal generator set at 60 MHz. The tinysa gave a reading of 60.068 MHz. There is no manual with it but there is an online address listed for instructions. You have to use a very weak signal, used a small capacitor to block DC and 2.2 Megaohm resistor in series with a 50 ohm. The generator was set on 1 volt and I measured across the 50 ohm. The reading was about midrange on the SA. Edit: Just want to say 9 months later I use this little Spectrum Analyzer all of the time, feels like I've had it for years. One of the best things I've bought on Amazon. I would give it 10 stars if I could, if it went bad tomorrow I would order another! I like to build small rf projects for fun and use this to make sure there are no rf waves leaking out and bring the wrath of the FCC down on me... There is one bad thing, the supplied antenna broke from its base within a couple of months, I bought a much better one and a set of attenuators
K**N
Buy it from somewhere else
The product is good. It works as intended. The issue is Amazon! The shipping is so slow you are farther ahead to get it elsewhere. The customer service is so bad that it took 4 phone calls to get the item shipped. Great product if you use Ali-express or temu, or even ebay!
J**E
El rango dinámico es bastante escaso por lo que algunas pruebas no las puede hacer.
S**R
On-line Reviews of this product mention that it is available for around $50. What is puzzling me is the high Amazon price.
Trustpilot
3 weeks ago
3 weeks ago