Question 1

I need an estimate of coverage. The two 6oz containers -- would they be enough to fill gaps that are, in total, about the volume of a softball?

Accepted Answer

This is an educated guess but I'm thinking you would come up a bit short.  If you would need just that much or a bit more I don't think the 6 oz containers will do it.  If you need a bit less than a softball size, you might make it happen.  Keep in mind that once mixed you have to apply it within a certain period of time.  For each application I applied it, there was some that was wasted as I filled the voids and then removed the excess.

Question 2

the bottom horizontal part of my window sash has rotted, just on the ends. will this stuff work and how do I get it to stay on and not drip out

Accepted Answer

Hopefully the prior answer went out to you.  In brief.  Take out all the rotted wood.  To be especially safe put in a few small flat head steel wood screws so the heads are well below the finished surface and undermine some small holes with a 1/8th inch drill.  To support the bottom put saran wrap over a thin sheet of plywood or a roofing shingle and clamp or screw it in place.  That should keep the support from sticking.  Plan 24-48 hours for it to become workable.  Depending on your temperature.  I used it indoors and the temp was about 70 degrees.  Test it for workability after 24-30 hours.  It is really stiff when it goes on and I was really suprised at how well it worked in adhering to oak.  The last church pew I repaired, I only roughened the surface of the wood and drilled a few holes.  I worked it to shape with wood chisels, very sharp, and a sanding block Initially use a course paper, then work down as you get closer to the finished surface.   I was putting in wood grain and matching 3 different colors in the oak, and really had no problems. I was very pleased with the product. Incidentally this church had been told the problem was not fixable.

Question 3

What about staining?

Accepted Answer

Yes stains do hold to it

Question 4

can I use this outside if the temp is under 50 degrees?

Accepted Answer

I have not had a problem but your question is not very clear.  Do you want to apply at 50 degrees or after cured will it hold up.  I'm in Arizona and the winter temp hits freezing with no trouble.  If you want to discuss more, Abatron's number is 800.445.1754

ASIN	B0149KZAX8
Best Sellers Rank	#67,788 in Health ( See Top 100 in Health ) #98 in Wood Polish
Brand	Abatron
Brand Name	Abatron
Color	clear or transparent
Colour	clear or transparent
Compatible Material	Epoxy
Container Type	Pail
Customer Reviews	4.5 out of 5 stars 899 Reviews
Full Cure Time	120 Minutes
Global Trade Identification Number	00051191441066
Included Components	shelving-hardware
Item Form	Liquid
Item Package Quantity	1
Item Type Name	Woodepix Kit
Item Weight	181 g
Item form	Liquid
Manufacturer	ABATRON
Material	Epoxy Resin
Material Type	Epoxy Resin
Model	WEAB6OR
Number of Pieces	2
Other Special Features of the Product	Water resistant
Part Number	WEAB6OR
Special features	Water resistant
Specific Uses For Product	Countertop, Flooring, Furniture, Masonry, Repair, Wall Repair, Wood, Woodworking
Specific uses for product	Countertop, Flooring, Furniture, Masonry, Repair, Wall Repair, Wood, Woodworking
UPC	051191441066
Unit Count	12.0 Grams
Viscosity Level	High
Volume	340 Milliliters
Water Resistance Level	Not Water Resistant

Abatron WoodEpox Epoxy Wood Replacement Compound, 12 oz Kit, Part A & B

Details

Details

Description

Specifications

Common Questions