Neewer 2 Packs Dimmable 5600K USB LED Video Light with Adjustable Tripod Stand/Color Filters for Tabletop/Low Angle Shooting, Colorful LED Lighting, Product Portrait Youtube Video Photography

Really good for creative ppls . I used it for my recording studio and makeup set up . Very strong lights and rgb

The light is good but the stands are not. The material is cheap but compare to the price its good

I liked everything about this offer. They heights are good, the lights are just great.. Hey remember how much you are paying , for this offer? you are getting a bit more than what you pay for.

Good Product, I recommend it but not to use as a key light, also the base is not stable, always fall... better to use as fill light or to shoot B-Rolls on a table or small area, as a budget light, it's good for the price.

Very strong bright lights, great value for the price.

The Tripod model can be improved as its very light and short to hold the LEDs

I ordered it expecting a steady light, it’s shaky, tiny and the cable is also too short !

الاضاءة جت زي ما هوه معروض تمام والقطع كاملة بس الاضاءة مش قوية قوي انا لسة مجربتهاش في التصوير هتبقا عاملة ازاي بس شغلتها وشفت اضائتها مش احسن حاجة بس كويسة بالنسبة للسعر وطولها كويس بالنسبة لاضاءة خلفية

Voor het opnemen van interviews

Bought these as I wanted some simple, lightweight, portable lights to use for video work and photography. Couldn't be happier with these. They're a decent brightness and the included gels are a great bonus. The stands feel flimsy due to the plastic material but they hold well and work great. They'll also double as GoPro mounts if needed as they come with those connectors. The ball heads are metal so they have range and hold well. All in all these are a great addition to anyone's video or photo kit. I power them with a 20,000mA power bank that I bought here as well and that works excellently for portability. The USB connectors for power are ideal for that purpose, or to plug into a computer or any powered USB source. Might even consider picking up another pair in the future.

This is an initial review, meaning that these are my thoughts on the product after only a few days. If anything happens within the next few weeks to couple of months, I will update my review to reflect things. So far so good, they seem to get plenty bright and light my face quite well. In regards to the brightness, they offer 10 levels of brightness. When turned on, you can turn the brightness up and down in increments of 10% each with the lowest level of brightness being 10% and the highest being 100% making for 10 levels of brightness. When it comes to quality of the materials, I had thought about giving three stars, but decided that for the price that wasn't fair so I am giving four stars instead. Everything is plastic, so don't expect anything super high quality, but as far as plastic goes, it's more than acceptable material quality. The only metal component is the piece that connects the LED panel to the stand and the other connector at the top of the stand. I'm not sure what other people were complaining about in regards to them not being balanced when fully extended, but perhaps they were not standing them up properly or on a level surface, fully extended they stand up fine for me. However, the entire thing isn't all that heavy, so it's possible that if the environment you plan to put them in isn't all that stable with wind blowing, sloped surfaces, or moving surfaces, then they most likely will fall over and I would highly suggest rigging something of your own design to grab hold of the base, and weigh it down if you plan to use them in a non stable environment. In regards to versatility I am rating them at 4 stars, they aren't the most versatile, but they offer enough range of tilt and swivel based on the two connector pieces that you can have them shining at almost any angle, the only reason they get 4 stars instead of 5 in this aspect is due to their maximum height not being the tallest, and also because of what I mentioned above about the overall weight of the product. Laslty, I would highly suggest you head the specifications of the product when they state that these panels require 5v and 2.0A through USB. Connecting them to lower voltage, and lower amperage USB ports may result in the product not working right. Connecting them to USB that supplies more voltage and/or amperage than what they require that is cheaply made and does not properly downstep the voltage and amperage and thusly properly regulate the power output to only be what the device is asking for, will most likely result in you burning them out and destroying them. So I would highly recommend that whatever USB ports you plan to plug them into, you make sure that they supply at least 5v and 2.0A and that if they supply more, that they are properly built to downstep to only provide what is being asked of it by the device. I personally am plugging them into a 2 port USB wall adapter that supplies up to 5v and 2.1A but that I know is quality built and will downstep itself to only provide what is being asked of it by a device that requires less than what it can supply. If interested in what USB wall adapter I use, it is the Ailkin brand here on Amazon, and it is a 3 pack for $11. As for the filters you get the following: Two of each, one for each panel. Red, Blue, Yellow, and White. The red, blue, and yellow filters are thin and mostly transparent, allowing for light to pass through easily while coloring the light. The white however is thicker plastic that is softened white and used as a diffusion layer to diffuse the light coming out of the panel. While the white diffusion panel is in place, there is only enough room for you to slide a single colored filter in front of it, so this means that if you wanted to double up on a single color, or mix two or all three of the colors together on the light, you would have to remove the diffusion panel from the light, but that is OK because once you have more than one colored layer installed it ends up diffusing the light source by just enough that it's not super harsh on the subject you are lighting. So to summarize: They are bright. Overall decently built for the price, but fairly light weight. You get two of them for such a low price. They are powered off of USB, making them more versatile since you can plug them into the USB ports on a PC, or can plug them into a 2 port USB wall adapter like me, making them not have to take up two power outlets with fatter brick connectors or anything like that. So all in all I give these a 5 star rating for what you're getting and for the price, and I would highly recommend these for the entry level budget photographer if they need something quick and cheap to use, but mostly for anyone who's on a tight budget that wants to have good lighting for either live streaming, or making YouTube videos. As stated at the beginning, this is an initial review, and if anything happens within the next few weeks to couple of months, I will update this review. Thanks for reading. -UPDATE- It's been 7 months and they still work perfectly fine, granted, they never move or get unplugged from where I've had them at my desk so there's no wear and tear from moving them around.

話せば長くなりますが、100均で撮影ブース制作をきっかけに手持ちのさまざまなLEDライトを試してみましたが、なんかイマイチで影が出来るしそもそもくらい。そこで思い切って撮影用と謳っているこちらの製品を価格もまぁ安かったのでそこまで期待もせず購入。結果、大正解でした。造りに関して言えばめちゃくちゃ安っぽい。誤って踏んだりしたもんなら簡単に壊れるレベル。指で弾くと安っぽいプラスチッキーな音が響くという感じです。しかし照明としてはかなり有能で素人の自分でも位置やら角度を調整すれば影を残さずかなり綺麗に撮影することができました。耐久性についてはあまり良くはなさそうですがもう少し様子見てから評価しますので現時点ではコスパも含め星5つです。

If you're looking for solid SOLID stands, these aren't for you. They're great for what I need but they are plastic so they have a bit of give and are quite lightweight, but of course they do hold the lights without issue! The stands double as a selfie stick (inc padding to hold on to) if you attach a phone holder or have a standard camera thread to attach to (small camera, you're probably not getting a DSLR on it) USB powered, you can take them with you if you're an out and about filmmaker and power them off a regular old portable phone charger. They also come with blue, red, and yellow gels which are quite effective for light colour but I've not needed them much for my projects personally. oh and ofc they're like.. dimmable lights and that if you need those. The light quality is great when you add the included diffuser. A nice range of brightness too from just enough to see in the dark to light everything up that needs lighting up -- and there's two of them! While the build may feel a little flimsy (it is all plastic based) I believe as flimsy goes these will last quite a long time. My only real concern would be stepping on them if I'd left them on the floor. I do not think they'll break themselves in any way! You can also if you're quite silly attach one of the stands to the other and make a really long, really unstable, really flexible selfie stick but I definitely almost snapped something doing that.. Don't do that with anything expensive on the far end :)