KDD Webcam Stand Camera Mount with Phone Holder, 22 Inch Foldable Flexible Gooseneck Cell Phone Clamp & Table Projector Mount, for Logitech C922 C930e C920S C920 C960 Brio 4K, Gopro Hero 8 7 6 5

I absolutely love this phone stand! Assembly was quite easy, I followed the directions on the instruction manual and had no issues. I film a lot of content and have been searching for a good stand to hold my phone for awhile, so finding this product was such a relief! It's very sturdy and I like how it can be securely attached to your desk. It is very adjustable, allowing for lots of different angles. I also love how it's not just a phone stand, but a tablet, camera, and even webcam mount as well! Truly can't recommend this little stand enough, if you're looking for a product like this you definitely don't need to look any further!

TLDR; This is a relatively cheap and very sturdy option for mounting small cameras, microphones, lights etc and can easily be positioned and locked securely in place. Perfect for mounting an external webcam. The arms are metal and feel very solid. The baseplate has a small footprint with a rubber pad on one side and a small C-clamp cup on the other that I recommend placing a small pad between the metal and your desktop, but is nevertheless very sturdy. The connector between the baseplate and the arms is a solid metal hex screw that can be locked in position with a friction screw and works well to hold it in a desired location. The articulating joints are ratcheting and lock tight in position while allowing a great degree of freedom and the ball head is good quality for the price and has a standard 1/4 in 20 teeth per inch screw that can fit standard camera equipment. The phone mount is solid, and holds well.

I mainly bought this for video recording my worktable from a top-view as I show diagrams of what I am building, as well as videotaping the build off my iPhone. In terms of holding the camera steady and sturdy to the table; I give 5-Stars! In terms of adjusting the height and length - I give 4-Stars. The reason for that is both arms do not telescope. I find this a design flaw, or short-sighted in the least. The horizontal and vertical arm adjustment angles - I give 5-Stars. The unit is designed with saw-tooth clamps that allow you to fine tune the degree of angle. The phone holder and ball joint - I give 5-Stars. This allows the User to set precise angles - up / down, Left/Right and etc. with ease by turning the thumb-screw adjustment. The iPhone holder itself I give 3.5-Stars. The reason is that the holder has an extremely strong spring that make it difficult to secure the phone into position. You need to be very careful how you hold the phone as you place it in the holder as it's very, very easy to press the side buttons on the phone! Another problem of pressing the side buttons is the holder itself. Securing the phone sideways (landscape), the footholds of the holder can also depress those buttons - so it's very important that you position the phone where both the holder and your fingers are not pressing buttons. I do use an iPhone case - but even with that, it's still easy to press those buttons. Overall - giving the limitations I mentioned as well as all the other observations I find this product to be excellent. Even though the arms do not telescope, the iPhone does capture 95% of the work area - and using both the arm adjustments for height, along with having the camera zoom in / out, the Mount does more or less what I want it to do. It's very sturdy, and well made. There really isn't much assembly. All you need to do is secure the C-clamp to the pole. Then secure the clamp to the table. Screw in the Phone Holder and you're done. The rest is just adjusting the desired angles.

Super excited to use this webcam stand with phone holder! I was quite surprised when I opened the package and found that the base was quite sturdy and had some weight to it. Assembly of the product was very easy, and even came with a mini screwdriver, in case you don’t have your own. It came with a phone holder with two different places for it to attach to the ball neck base. My phone had no issues with the phone holder (iPhone 13 Pro Max, with a case that’s not too thick), and the stand held my phone up with no issues (you have to adjust the gooseneck, which was super easy to adjust). The product is not too bulky and fits perfect on my desk for my filming needs. I can move it around my desk and adjust the base/gooseneck easily to get the angle that I want. I can see this product as not being suitable for anything larger than a phone, but if you primarily use a phone/webcam/small camera, this is an excellent product! Third photo shows a picture I captured using the stand! I love that this stand can capture at that angle because I intend to use this product for filming at that angle for unboxing/study with me/other study content for my Instagram account.

This is a decent quality product, but not quite what I wanted. The ball head attaches to the end of the third rod so that rod has to be close to vertical to get any use of the ball swivel. The first rod also always sticks straight up from the stand. The middle rod pretty much has to be horizontal to then actually place the camera over the desk. Which leaves very limited range of where this can place the camera. It's going to be at least 10" above the desk; more if you want to use the swivel. It does give you a notch so you can position the last rod horizontally. That said, there are lots of adjustments and they seem sturdy and easy to use. The way this looks designed to be used is you set it up once and then lock all the joints. So it's not convenient if you want to swing the camera out of the way. I think this is more useful for a phone than a camera and would be more useful if you buy two like some people did so you have 4 segments and more flexibility or range.

Absolutely love. I use it to hold a Sony Zv1f to livestream, it holds it safely and firmly, and it’s quick and easy to move so I’ll use it to also film POV TikTok’s. I’m thinking about getting a second one!

Questo è il mio terzo supporto. Il primo con la molletta per supporto di cellulare si è rotto quasi subito. Il secondo simile a questo traballa e non si fissa bene (il tavolo è stretto, ho poco spazio) E finalmente ho trovato il supporto giusto Lo utilizzo per Sony zv-1 e iPhone 12 pro max. Vantaggi: 🟢 quasi tutta la costruzione in metallo 🟢 struttura robusta, non mi trema il telefono o camera durante utilizzo 🟢 la paste principale che si fissa al tavolo contiene la guarnizione per la protezione della superficie 🟢 adattatore per il cellulare si può avvitare in 2 posizioni (prima volta che mi capita) 🟢 visione multi-angolo sia per cellulare che camera (per TikTok è molto comodo) 🟢 compatto, una volta smontato occupa pochissimo spazio ( supporti precedenti erano molto più ingombranti) 🟢 bullone di riserva (mai visto una generosità del genere) 🟢 comodo il sistema del fissaggio, sulla foto si vede che il mio tavolo ha pochissimo spazio e sono riuscita a fissarlo per bene senza problemi (il supporto precedente aveva la maniglia grossa, sbatteva sul cassetto e il supporto non si fissava bene, rimaneva lo spazio vuoto) Svantaggi: 🔴 Al inizio è difficile a maneggiare per trovare la posizione giusta. Ma una volta presa la mano diventa facilissimo. Vi lascio qualche foto e video per far vedere come io utilizzo questo supporto. Spero di essere d’aiuto per qualcuno.

Sehr praktisches Setup! Der Webcam-Stand mit integriertem Handyhalter ist super vielseitig und dabei erstaunlich stabil. Durch den faltbaren Schwanenhals lässt sich die Position schnell und präzise einstellen – perfekt für Videocalls, Streaming oder Inhalte mit dem Handy. Egal ob Webcam oder Smartphone: Beides sitzt sicher in der Halterung, lässt sich gut ausrichten und bleibt zuverlässig in Position. Für flexibles Arbeiten, Homeoffice oder Content-Creation absolut empfehlenswert! 5 Sterne!

I use it as a mic stand for my wave 3, instead of a bulky scissors arm. It is very sturdy and occupies minimal space. This is also probably the longest rigid stand in the market at this price point.

Estoy completamente contento. Los soportes son muy buenos y firmes. Tengo luces con baterías para nada livianas y también una cámara T6i y se mantiene bastante firme en su lugar. Veo comentarios que dicen que las piezas de plástico que sirven como "engrane" para acomodar la postura del brazo las hubieran preferido de metal, pero para el tamaño y peso de los artículos que van a soportar no lo veo necesario y menos cuando no vas a estar cambiando las posturas a cada rato, esas piezas de metal solo las he visto cuando me toca hacer producciones con equipos de un peso bastante considerable. 100% recomendado

Tiene la medida deseada