Cassida C300

Went for a cheaper model and found this one instead cuz the old one had been discontinued. Prayed about it and realized this was going to be a good investment. First off. Tech support was awesome before and after I bought it. I had lots of questions because if I was gunna put down this much cash I wanted to make sure it was going to do what I wanted it to do. First off should let you know I was buying the cheaper 'kids toys' for years and could have bought one of these and then some for the numbers that broke. I do what is called 'coin roll hunting' where you get coins rolls from the bank, break em open, go through them and look for cool stuff and then pull em out. Silver quarters, silver dimes. wheat cents, etc... Well you can go through a LOT of change that way. So some notes: 1) You can fill the hopper and keep going and gonig. Only makes a mistake once in a very long while. I ran the same 80$s worth of mixed change through it over and over again and it was always accurate to within one coin mostly exactly, once or twice +/- 1, usually a dime. 2) You can put the bins in and collect the coins in piles or put the tubes in and do it by tubes. 3) With the bins the bins are rearrangeable with two sizes, large and small. In the default configuration sadly the penny is a small so it can fill pretty fast if your like me gong through tons of pennies, however I have a solution for that in a minute. 4) You can set the 'batch size' where you tell it how many to count OF EACH TYPE DIFFERENT before it stops. Then when it stops it tells you which one was full. This is great for when you set different bin sizes or use tubes or mix. There is a way to set it to the default tube sizes (as in for rolling for the bank) so you dont have to do those by hand. Sadly there is no default setting for the bins so you gotta bunch those by hand. I default to 300 since thats teh minimum for all of them so I dont have to memorize for each bin. (It tells you in the booklet). 5) The tubes are designed to take the shotgun tubes which is fine. But I prefer the flat wrappers because you can get 1000 for 7 dollars and keep them in the tiny box they come in versus paying 10 times that and taking up so much space. Sadly though you have to do some modification for that. There are slots at the bottom of the tubes (you can see them in the picture where the wrapper shows through) where if you dont cover the slot and your not using a preformed tube, the coin will bounce out. I took some extra quarter wrappers and wrapped them around the tubes at the bottom so they wouldnt pop out. Viola fix. Now all you have to do is fill it to the right max and then take the flat wrapper and dump it in. Sadly the tubes are a dark grey so you need rally good light to make sure its all inside the wrapper and you didnt miss any and have them fall on the floor. 6) NOW MY NEAT HACK!! I have one of those penny contraptions that sorts the pennies by copper vsus not copper (The copper in a pre 1983 penny is worth twice the penny itself. Tho currently its illeage to melt down the pennies that ban is supposed to be lifted in the next 5 to 10 years when they stop minting pennies. Its the new fad but I just do it for fun.) So anyway I am making a system to feed it directly into the sorter I designe from a kit and so I what I did was a bought an extra set of tubes. (5 dollars are tube from the company, bit expensive but worth it for me) and dremeled off the ends. NOW I can sort them into whatever bucket/pouch/whatever I like and not have to be limited by the tubes/bins. I tested this by putting a large dishpan underneath it and ran the 80 dollar test batch through it. OH NEAT TRICK. BATCH ZERO IS DONT STOP. If you set it to zero it doesnt stop unless you hit the stop button. So I ran my 80$s through it non stop into the dishpan and it was just fine. My friend is bringing over his penny jar, a half or so home depot bucket of pennies that we are going to dump through it so I cacn count it and buy them off him for my project. With my hacked tube for the pennies I can just keep dumping them in and have them spit out into my own container and give him back his bucket. Counts fine too so I can give him cash. One side note though is you do need to make sure its empty when you turn it on cuz it spits out the first few as a self test. Doesnt seem to be a problem though. I ran it with wha was left in the hopper after that just fine. Also there is a hatch on the back that is for getting jams out and I'm not entirely sure how it works. Hasnt jammed so far but I am careful to check for things like paper clips and staples and what not. The hatch is VERY hard to get off and I suspect you would have to til the machine a lot to get something out so I dont know i that means if it jam jams you have to dump all the coins out, or if it will get stuck in the machine or what. Hope I never have to find out!! There is a anti-jam process it goes through which I dont know how it works but its mentioned in the manul and one time it made this horrible grinding sound which was mentioned and then it was fine. So I guess maybe it does some massive vibration thing to shake things loose. Thats it! I ran 100 dollars of quarters and dimes through ti roll em and it was wonderful. The quarers were from shotgun tubes and the dimes were flat wrappers (You can NOT put the flat ones directly in the tubes).

We have a conference in which we sell books and have registers. We usually have about 7 registers open at one time and at the end of every night we need to count the tills and sales and pull the money from the registers. We used to count the till change by hand, which took us over an hour to count all 7 registers when all you want to do is go home. We have a 3 point check so the change gets counted 3 times so counting change by hand was a slow, tedious process that sometimes was made longer by human error and the need to count more than than the 3 times. Once we got this machine it cut our counting time in half if not more. We spend only 30 minutes counting all 7 tills. The change machine is fast, effective and accurate. Now to the machine itself. The rotating blade where the change is placed and turned to be sorted is somewhat slow as it rotates at a rate which may seem slow at first, but it can sort a whole tray of coins in less than a minute. It sounds slow, but it's actually a fast process. You can also push the coins a little over the rotating tumbler if you feel its rotating slowly. This does not affect the sorting process, only pushes the coins down the sorting hole faster. This machine is equipped with a printing function which is a GODSEND. We love this printout. We have multiple people using this one counting machine so for them to be able to printout a report of the change makes going between groups that much quicker. No one has to sit there and write down the change numbers. They simply attach a coin counting printer and with a press of the button the report will print. It's fantastic. This is by far the best feature of the machine. The machine sorts by size so the trays do not sit in numerical order, e.g. $1, .25, .10, .05, .01; but rather it goes by size so the 1 cent comes before the 5 cents which is just something we had to get used to when dumping the coins back into our till trays. It's a slight annoyance but not enough to not want to use the machine. Another thing to note, the machine does not discriminate between foreign currency and US currency. So if you have a foreign currency that is the same size as a penny, it will be sorted with the pennies. I tried this machine with some foreign currency that we had and for the most part anything that was odd sized or shaped ended up in the $1 tray, but if there was a coin that was the same size and shape as the other US coins, it sorted into those trays. We have only used the tray functionality, and not the coin wrappers; however, the idea that we could roll coins easily is fantastic. I cannot attest to the ease of this feature however. You can set the machine's functionality to sort the different denominations to a certain dollar amount; meaning you can set pennies to only sort up to $0.50 which is the amount of a penny roll. The machine will stop sorting the pennies until you stop and reset the sorter. This goes for all the other denominations. This makes rolling the coins very easy. Again, we haven't used the rolling feature, but it is nice to be able to have in case we do use it in the future. The carrying handle is convenient if you ever need to move it; it is heavy but not too heavy to carry. Definitely recommend this if you are counting a lot of change.

This coin counter is awesome. It blasts through sorting coins perfectly. I had numerous jars of coins saved up for 15 or so years. I had mixed in Euro coins and other non-us coins as well. I needed to sort through everything then roll and take to the bank. One of the things that really sets this unit apart is the drop in coin trays. The machine blasts through sorting and dropping the right coin in the right bucket. It is very easy to visually inspect to confirm sorting is accurate and let me pull non-us coins out of the mix. I then rolled them coin type at a time (e.g. Quarters first, then dimes, etc). It was a lot more efficient rolling the same type of coin vs trying to have the machine sort through different ones and dropping them into the sleeves. I think this may be why people have issues. If they have anything mixed in with their coins it can screw up counting and sorting. Presorting takes the guesswork out. Sort everything into types, visually look at the coins to make sure all sorted ok, then blast away rolling one coin type at a time. When following this procedure the machine ran perfectly. It counted 100% accurately and made it very easy to pull out full sleeves and reload. The machine is super fast when counting the same coin type. By the time I folded the top of the coin sleeve the next one was full. It isn't the fastest machine in the world, but it much faster and more accurate than I could ever be. I also found that the counter was exactly right. I'm not sure why people are having problems with it. My guess is their machines may be dirty or they have non-standard coins. I tried to keep my machine clean as I ran through buckets of coins. I'd wipe it down between each batch. I had zero issues. Another thing that is very important is to use good quality coin sleeves that are preformed round. Do not use the flat coin wrappers. They will cause the machine to jam. I believe a lot of people are having problems because they are not using the right sleeves. Buy ones that are designed for automatic machines and read the reviews. The good coin sleeves that work well in automatic machines have good reviews and people comment on how well they work in coin counters. I used Royal Sovereign Coin Wrappers. They were perfect. They are boxed well and hold their shape. Drop them into the tube and in 15-20 seconds the wrapper is full. Occasionally the first coin may be slightly slanted (not flat on the bottom), but the length of the Royal Sovereign wrappers is long enough to hold the full coin count even if they are somewhat out of alignment. Pull it out, tap the bottom a bit and they fall perfectly straight. Fold the top over and repeat. Outside of having the bank do this for you, this is the best system I have found to efficiently and accurately wrap coins. It is much better than the automatic machines at grocery stores. Not only do they keep a percentage of the money, I would not be surprised if they miscount in their favor. You can't see what is going on inside of the machine. Wrap your own coins. It is as easy as pie with the Cassida C200.

I got this today and it is a very good machine but I have some issues with it: 1. The screen flashes batch full (trays) when its not really always full, so I press the start button again. 2. Some nickels went into the penny tray so not sure if it was counted properly. 3. the counter in the middle does not go over 999 and the counter starts over so you need to add 1,000 to each amount over 999. It took me one hour for 5,961 coins to be added totallying $586.59 I did not use the wrappers it came with nor did I use the coin holders yet to put the wrappers into. It is a good machine and I will likely keep it. It there are any updates in the future, I will post it here. I do recommend this coin counter. Update 1/15/2026 I did return it. Thank you

It worked great for me with rolled tubes and bins. Just be sure to feed it the correct coins (no Canadian pennies in a US machine), and if possible, remove bent coins, debris, and stray objects before loading the hopper. Objects larger than the Susan B Anthony dollar will settle to the bottom of the lower sorter when you turn it off. If you have slender fingers, you might be able get to this area by opening a door in the back of the unit. Worst case, the instructions show how to open the unit instead. Since the mechanism pushes the coins from the smallest to largest opening, smaller debris tends to accumulate in the dimes tube/bin. When using tubes, the dimes may not fall flat due to the debris, leading to overflow, so again, relatively clean input will give better results. As for the speed, it sorts them at a rate of 300 per minute, which is 5 coins per second as long as the lower mechanism is not empty. I believe some of the complaints about speed don't take into account that the upper hopper only drops more coins into the lower mechanism when it detects more coins are needed, which introduces a pause. However, the operation is smooth and automatic, so you can just set your bin counts and it will stop when any of the tubes/bins are full. in my experience, the slowest part of the operation is the person using it, as it can fill the tubes faster than I can replace and crimp them. The bins and tubes are cleverly designed. Each has a magnet in front and a tab in the back to keep them from tipping, yet can easily be removed and replaced. I have only one complaint: the machine had a strong electronic/chemical smell that took a day to subside.

This Cassida C300 coin counter is as close as you will get to perfect outside of purchasing a commercial machine similar to what you might find in your local bank. I will share my experience using this machine. I am not a business owner, just making the point here that I don't have the need to regularly count coins as a business owner would. I store away my loose change when I have it and at some point want to count and roll up my coins to take to the bank. First I will say that this machine is accurate. It is important to use only the preformed coin wrappers. Even using the preformed wrappers you must be careful not to bend the wrapper at the open end where you would crimp it to hold the coins in. If there is a slight bend meaning that if the open end where the coins fall into is not completely round, then you will have coins that don't make it into the wrappers and the coin will hit the wrapper and bounce out or jam up that denomination. If this happens to you, simply check the coins that are in the wrapper and it should match up with what the machine is showing on the counter. This includes any coin(s) that bounced out after hitting the bent wrapper. Each denomination has a wrapper holder which holds the wrapper in place as the machine is inserting the coins. A few times I stopped to do a check and can inform you that this machine is accurate. My very first time using this machine I started with only pennies. It was my way of testing the accuracy and also to eliminate the possibility of a penny popping into one of the other chambers. This did happen but it wasn't the fault of the machine. This happened approximately 3 times and each time I needed to make sure the end of the wrapper was perfectly round. I didn't experience any this anymore after that. When you are first using this machine you are feeling out the machine which helps you to be able to run it with ease after you become familiar with it. When you want to wrap coins, it is important to go into the settings to set the number of coins to go into each wrapper based on the denomination. Once you set the quantity for each coin you can leave it and it will recall it when you power on again. If you are wanting to just count coins then you can clear out the quantities in the settings and just run the machine. This machine also accepts the $1 coins which is a plus in my opinion. I don't regularly get the dollar coins but it's nice to know that it can handle those as well. I just couldn't see myself paying CoinStar or other commercial coin counting machine to count my coins when I could invest in my own machine that will not only count but wrap my coins too. All in all I am very satisfied with my purchase of this Cassida C300 Coin Counter/Wrapping machine. I may update my review later if there is anything I forgot that bears mentioning. Hope this helps you.

El producto resultó ser un desastre. Desde el inicio deposité aproximadamente 150 monedas para que las sorteara. Éste no meramente se atascó en múltiples ocasiones, sino que depositó monedas de todo tipos y de todos valores en los distintos fundos. Fue una mala idea comprar este artículo. Creo que los distribuidores tratan de vender nuevamente los productos que son devueltos bajo anuncios engañosos de qué está bueno con meros desperfectos Fue decepcionante la compra. Para abonar a la situación el producto es pesado y cuando lo vas a devolver, AMAZON pretende que tú pagues por el envío inicialmente o que vaya si hagas una cotización y se lo envíes, pero esto implica que tienes que ir al correo dos veces con todo el inconveniente que esto acarrea. Deberían advertir de esta situación del pago del envío por el cliente en la devolución del producto previo a uno realizar la compra, para así uno tomar la decisión de si quieres pasar por el vía crucis de la devolución o no.

I bought this as I gather coins an put them in 5 gallon water jugs. I usually go to a Coinstar to count and cash in the coins. Now all the coin counting machines charge between 10 and 15 percent. So I was looking at a sorting, counting and rolling machine. I did not have any experience with them and wanted something good but not to good as I'm not using it everyday like a guys owning a pop machine or laundromat. The C300 seemd to fit the bill. I was worried that it was going to be a rinky dink machine. Actually It's well designed, and pretty fast not super fast but reasonable. Also, it's much guieter then I thought it would be. It aslo seems pretty robust. It sorted though a few hundred dollars of coins with no errors. I no idea if the count is accurate so I can't comment on that. It's doing what I wanted it to do and with the cyber monday sale price it was affordable. I know that it more than the coinstar cut of coins now but I will be able to sort and roll coins with no more cost other than the wrappers. A Good Buy!

Muy practica facil de operar y transportar

Works perfectly

This Canadian coin counter and wrapper is so great . My 9 yr old grandson can use it to problem very easy . It really works . Now the whole family wants to borrow it ..lol Its just as the seller describes it ...I would highly recommend wit . Fast delivery also ...thabk you

يجب ان يكون وصف المنتج واضح من وسهل الاطلاع عليه لم اعرف المواصفات التشغيليه للمنتج الا عند وصوله حيث ان المنتج يعمل بكهرباء (110V) بينما الكهرباء في بلدي (220V) لم استطع تشغيل المنتج حتى الان واحتاج الا ارجاع المنتج او استبداله بمنتج يعمل ب (220V)

The coin sorter we need is for Canadian coins....the outside of the box showed Cdn coins including our 'toonie'.....but the machine DOES NOT HAVE A $2.00 / Toonie slot....so we had to return it.