Tirrito Kryptonite 8 Lug Replacement Wheel Bearing Compatible with 1999-2010 Chevy/GMC Silverado/Sierra 2500HD/3500HD SRW & DRW (99-07 Classic GM Truck 1500HD/2500/3500 SRW)

Well the product is perfect but Amazon messed it up. Their system that tells you if they fit your vehicle.... it was wrong. The hub fits and works perfect. After some troubleshooting with Kryptonite the wheel speed sensors are different from the KR-10 (Amazon's pick for my truck) to the KR-12 (the actual ones for my truck). Simply swapped out mlthe sensors and it's all good now. So make sure you go to Kryptonites web page and verify the right part before ordering here.

These hubs are a huge step up from worn oem stuff since the pickups was assembled 2002. Biggest advice is to make sure your purchasing from an authorized retailer so you can register the warranty. Since the warranty was part of the purchasing decision

These are beautiful. Its a shame they get covered up. I ordered them for peace of mind and because I rolled over 100k miles on the odometer but turns out I needed them more than I knew. No play at all in my stock bearings but these Kryptonites are at least 50% quieter than what I pulled off. Very happy!

Very high quality product

Buyer beware. I have a 2008 Chevy 2500HD 6.6lt Duramax and these hubs fit perfectly. The problem is that the ABS sensors that come pre-mounted on the hubs are not the right ones for my truck. I contacted Kryptonite and this is the response I received: Thank you for sharing. The KR310 hub comes equipped with a sensor specific to the Classic body trucks 1999-2007. You'll need to swap sensors to correct this abs issue. So, if you have the 07-10 newer body style, these pre-installed ABS sensor harnesses WILL NOT WORK, and it will drive you crazy. You will need the KR312.

Bought this wheel bearing thinking it would be a good quality wheel bearing. Lasted me about a month and a half before I had play in it. Wasn't too worried so I contacted the company to see if they would warranty it out. Messaged them a few months ago and never got a response back. Ended up having to buy a new bearing from someone else due to no response back. Not sure if I just got a bearing from a bad batch or what it was. But definitely not buying another one from this company

Great shipping and performance as expected from kryptonite

I purchased a set of these, and yes they are sold as individual just so you know since it does not tell you anywhere. Well I put my left side on first since it was the worst one of the two front. I was excited to see the improvement and test drove after installing only to have my ABS system acting up, light was coming on and the ABS was thinking my left wheel was locking up so it was kicking on and would make the truck pull to the right badly, you better be prepared are it could cause you to hit something or someone. So I jumped on the googles to look for help, I found someone said check the wires to see if they were correct, and sure enough no the white was going to black and black was going to white. I was once again excited to see if this fixed and test drove only to find out not good, still very bad. I was so pissed at this point I was going to remove it send it back and buy a OEM, called dealer to find out the GM original was over $600 each. I started reading these reviews and saw one mention to swap to OEM sensor and this was going to be my last resort. I tore it down one more time and replaced the sensors with my OEM sensor put it all back together and took it for a test drive finally success. All problems gone truck was allot more quite removing my bad bearing also, the wife noticed that right away. All in all after multiple times of tearing down the left doing the right side went very smooth no issues, just put the OEM sensor in the first time.