VISM by NcStar Tactical Shotgun Scabbard

I can't speak highly enough of this product. After extensively reading reviews and shopping for a shotgun scabbard, I decided not to spend a ton of money and just get this value-priced Chinese one for starters and I could always upgrade later. After receiving the product, I don't think I'll ever need to upgrade!. The only question I have about it now is which color to buy next! Some reviews mentioned thin single stitching on the MOLLE straps that didn't hold up. This must have been a design flaw in earlier versions because mine came with well-stitched MOLLE straps and firm stitching on all seams. The nylon material is durable and of good quality. Nothing about it seems cheap or flimsy. Even the metal components seem to be steel as they are magnetic (you can see the metallic grey, oval magnet I stuck to one of the metal attachment clasps in two of my pictures). The carry strap is fully adjustable for length and has a sliding shoulder pad. The barrel end of the scabbard has an adjustable plastic clip so that it can be folded up and attached to shorten the overall length of the scabbard, or let out or unclipped to lengthen the scabbard by several inches to accommodate anything from as short as an 18" barrel to (probably) a 24" or 28". (In my photos you can see the sleeve mostly extended with the shotgun stock also extended and the shotgun pushed most of the way into the scabbard with the pistol grip all the way forward in the zipper slit, and in another photo you can see the sleeve tightened up to shorten the length of the scabbard and the folding stock folded to make the package as compact as possible) In my setup, I have a 12ga Mossberg 500 with an 18.5" barrel, plastic heat shield, Maverick 88 forend, and ATI top folding stock. The reason I wanted a scabbard and not a mere shotgun sling was so that I could attach the whole package to the side of a bag using carabiners or MOLLE. This scabbard absolutely does the trick! It's amazing how easy it is to carry the scabbard on my back with the folding stock collapsed to form a compact package. I highly recommend using this scabbard with a folding stock of some sort to attach your shotgun to your pack or other gear, or to just carry it on your back if that suites you. Soon I will be attaching a shell carrier to the MOLLE, but for now I have just stuck a few extra rounds in the MOLLE loops (this is not their intended purpose, but they are strongly enough stitched that a few of the looser loops can accommodate a handful of extra shells. The scabbard even comes with 4 button snap MOLLE strips. I use 3 of them to fashion a strap that holds down the folding stock so that it doesn't bounce around and stays close to the scabbard so it doesn't get caught on anything, yet the shotgun can still be pulled free from the scabbard without having to undo any of the straps. You can thank me later. The only possible issues to be aware of are that the scabbard is fairly tight (there is a little wiggle room but not much), so double barreled shotguns, shotguns with thick forends or bulky accessories (flashlights, lasers, bayonet lugs, vertical foregrips, etc.), shotguns with bulky muzzle devices, shotguns with bulky heat shields or sidesaddle shell holders, and shotguns with tall optics that do not easily detach may have trouble fitting into the scabbard. Overall, if you have a relatively clean, common profile shotgun with either a standard or folding stock, this scabbard should go a very long way in providing a comfortable, tactical, and versatile way to store, transport, and protect your gun. I highly recommend it!

I bought this scab for my 12 Ga. 18" barrel Shotgun. I wanted something to sit my weapon in but still have easy access to in case I need it. I looked at a few other options for shotgun carry cases and range bags for shotguns, but everything was either too big & bulky or lacked in quality. This bag is just what I was looking for and as soon as I touched it, in the packaging, I knew the quality was there, just by the way it felt. Nice thick material, similar to a duffel bag for you military guys. The scab fits snugly around the gun, which is exactly what I wanted. I do have a ammo sleeve on the stock which holds 5 shells, and it slides in just fine. The interior has a smooth fabric finish which allows the weapon to slide in and out quick and easy. I use the scab fully extended. My gun is approximately 39 inches long from tip of barrel to back of stock and it sits all the way down in there with half the stock showing , the trigger is fully covered. Lots of Mollie storage possibilities on the exterior. The bag it's equipped with tactical straps for multiple uses. Comes with a padded shoulder strap for easy carry. The gun stores downward for safety and quick retrieval. The only thing I can say needs improvement is that there are two grommets at the bottom of the bag. When fully extended as I use it, the grommets rub against the gun barrel. I believe the grommet is there to release air in the bag when loading it. Not sure. If they were closer to the edges and not centered, then no issue. I simply stuck a bandanna in the bottom of the bag to keep the barrel from rubbing , easy fix. Overall great scab , I'm greatly pleased.

If you are putting a plain Jane shotgun in this scabbard you will be pleased. It provides a nice padded, convenient way to carry your shotgun. It has a sling and generous molle attachments on both sides. It can secure your shotgun nice and snug with two straps. Has a zippered opening to assist stowing and removal. The length is adjustable for 18 to 22 inch barrels, may be even more as one securing strap, that has a quick side release buckle, can be adjusted out a few more inches. The color is between a Ranger Green and Olive Drab. Has two large D-rings and two smaller D-rings for even more tie down attachment points. The stitching all around looks very good with no frays or loose strands. If you are thinking about getting this for your Tactical shotgun, think again. With just a flashlight (mounted under magazine tube) this was incredibly tight. So much so I only shoved it in less than 6 inches before thinking better about it. If you have a small slim flashlight you MAY be ok. I removed the padding, my shotgun has so many scratches and such from normal wear and tear over the years that the need for padding is moot at this point. The extra room was enough to put my flashlight and sidesaddle shell holder attached with no problems. The padding is a closed cell foam 1/4 inch thick so removing it gave me at least a 1/2 inch more room. I know some of you are saying what a nut case, he removed the padding blah blah. It's not the first time I have had to customize something, some of you out there out there know what I'm talking about. Putting "Tactical" in the name is misleading (that's where the fifth star went). As I said just the flashlight was very tight and if any of you have other Tactical attachments on your shot gun, forget it. Oh my weapon of choice is a Remington 870 20 gauge 18 inch barrel with a 2 shell magazine extension, Mesa Tactical pistol grip adapter with a Magpul grip with storage compartment, a generic M-4 collapsible stock with a Limbsaver recoil pad, Mesa Tactical 6 shell side saddle holder, UTG quick release light mounted on a UTG three way Picatinny 3 spot mount in lieu of a barrel/magazine clamp. It doubles for my at home and out in the wild defense. So at least now I can bring along my shotgun and not have to carry it or try to sling it with a back pack and minor climbing and jumping thru the wild. I can mount it to my rucksack and still have it at the ready. I am a happy camper.

I love this little bag/scabbard. Really good value for money. Very sturdy and fits my short pump and short semi shotguns perfectly. Scabbard retains it's form (sturdy) and is easy to get the shotgun in and out without scuffing, rubbing or wrestling it. Very happy with the scabbard.

La atención del vendedor fantástica. Y la funda excelente.

This was surprisingly well built, very strong and well padded, over half an inch thick. It fits my Stoeger X3 youth sized airgun perfectly and has restraining straps to keep it falling out. Pay attention to the size and note that this will not hold a gun with any accessories attached, just the rifle only. Looks like a perfect fit for any .22 rifle or shotgun like Remington 870 or a double barrel stagecoach type with fairly short barrels. Its what I would call a slimline case. Has a lot of additional straps and attachments for a backpack mounting arrangement. Definitely worth the money and much more convenient than a standard full sized soft case.

This is a truly well-made product. The material and workmanship are impressive. It's very durable, reliable, and comfortable. There are some minor issues with the zipper, but they are easily fixed. Unfortunately, the seller didn't provide exact dimensions, so it's difficult to estimate the interior volume. In my case, it was too narrow for its intended purpose.

Perfect. Well padded interior & outer material is durable. Holds 18 & 24 inch barrel lever actions perfect. Nice & snug. Very well made scabbard that you can carry so many different ways with movable sling or even hang it from side of your MOLLE compatible backpack. The rings & clips are metal (not cheep plastic) - very pleased at that. Overall great purchase for my intended use.