CAMVATE C Clamp Mount for DSLR Camera Led Video Light and Binoculars Holder

I'm a professional photographer and I'm always looking for convenient clamps to secure my equipment in space-saving ways. With these Camvate clamps, I can put lights right where I need them and also work well with trail cameras etc. The primary segment is cut from a solid piece of aluminum. There are 12 spots to secure a 1/4-20 threat which is also standard for most tripods. There is also a centered 3/8 - 16 thread opening so even audio gear is compatible. It opened to a maximum of 1 and 5/8" inches, so can put it on a 2x4 frame or clamp to a table top etc. It has pads made of soft plastic so you won't mark a table or scratch glass surfaces. The threaded portions for adjustment are steel with a solid plastic articulated arm and plastic twists for securing in place. For the money, I definitely recommend these clamps. I'm impressed and compare them with "small-rig" gear. Don't even think about putting a DSLR body on this, with any vibration it will likely shift. But for led light panels, strobes, audio microphones etc... good to go!

Needed a desktop clamp for my camera to shoot stop mo stuff. I was skeptical about how well the single knob tension for two points would hold. As I had hoped it works perfectly, and the simplicity of the single knob tension is brilliant. It's tight enough for my desk and what I need it for, yet it will not get overly tight.

A little difficult but works for lightweight equipment

I use this for mounting a small solar panel for keeping an outdoor wireless camera charged.

I needed a cheap clamp to hold a camera onto an oddly shaped window sill, and this would have been perfect out of the box if the far end of the clamp was the same length as the adjustable plate; as is, that extra protrusion made it impossible to use this clamp without the addition of a wooden shim. A little bit of that though and my camera is firmly attached.

I bought these for battery power security cameras, although they can probably be used for other cameras as well. Its not the prettiest thing to use, its a bracket and a plastic mount. There's a bunch of mounting holes on the bracket so you can adjust where and how the mount goes. I figured this wouldn't be very sturdy but surprisingly its very sturdy and can hold the cameras in pretty much any direction I've tried so far.

I purchased this to mount a small projector on and it seems it will work just fine. Quality made.

Works sometime. Slightest wind will loosen it. You have to tighten them a lot. Better than nothing but I will keep looking for something better. I use to Hold a scope on a surface

Ich verwende dieses, doch recht günstige Produkt, vor allem um meine Spiegelreflex (EOS 6D) als Webcam nutzen zu können. Ich habe es aber auch schon mit verschiedenen Objektiven verwendet um Natur bzw. Langzeitaufnahmen vom Balkon aus zu machen. Kann man alles machen. Getestet habe ich das Stativ allerdings nur mit "kleineren" Standard Objektiven. Von der Stabilität her sollte es aber auch in der Lage sein größere Objektive halten zu können. DIe Schrauben sind sehr gut zu befestigen. Die Handhabung ist sehr einfach und natürlich kann man das Stativ auch für andere Kameras und Objekte mit Stativgewinde verwenden. Der Arm ist frei einstellbar und damit sehr flexibel und erreicht nahezu jede sinnvolle Position. Ich selbst habe das Stativ mittlerweile fast nur noch an meiner Schreibtischplatte angeschaubt wo es sehr gut hält. Es gibt keinerlei Zwang das Stativ, wie auf dem Bild, zu befestigen, auch an der Schreibtischplatte hält es absolut super. Die Verarbeitung wirkt optisch nun nicht so gut, Kunststoffteile weisen teilweise kleinere Kanten auf die auch fühlbar sind, aber ehrlich gesagt erwarte ich bei diesem günstigen Preis auch lediglich das es funktioniert und hält. Jederzeit gerne wieder!

Very good

Love how many mounting options there are with the 1/4" thread holes. The little rotating arm has proved very effective to choose exactly the right frame for my Zoom meetings. Will be using the extra holes to screw on a ring lamp for better quality video feeds. Chose this one as it had both the round or flat clamp options built into one clamp! Thank you whoever designed this!

C'est vraiment un bon produit. Je m'en sers sur des observatoires, pour y mettre une caméra et la stabiliser. Il est très flexible dans le sens que l'on peut choisir le vissage selon ce qui est disponible dans l'observatoire. Il inspire confiance par les matériaux utilisés. bref je recommande.

Il prodotto si presenta bene ed è robusto. Un po' ingombrante la parte del morsetto ma in compenso è molto forte nella pressione e quindi resta molto saldo. Per il resto funziona benissimo.